Released as part of the Allspark Power refresh of the movie line, First Strike Optimus Prime is a extensive redeco of Voyager class Optimus Prime in a colour scheme based upon Generation One and Classics Optimus Prime. The included toy bio describes this coloring as Prime paying tribute to the markings he wore as a young soldier when the war began. Due to the transformation scheme, this figure actually ends up being less like its G1 counterpart in robot mode, a sacrifice made for the slavish redeco of the vehicle mode. You can't have your cake and eat it too, folks.
Equipped with knowledge of the future and the danger that would soon be threatening the transformers, Ravage's machinations included trapping Megatron and a large army of Decepticons in a spacial rift with the intention of protecting the Decepticons from the approaching Unicron and forcing the Autobots to face the planet-eater unaided. The Decepticons would then be in a position to conquer the victor of that battle.
When I was a child in the 1960s, I bought most of my own Lego, using money from paper routes I had from the ages of 7-16. But the items I bought we not ‘kits’. They were small boxes of standard bricks. Each box contained only a single shape and colour, but you could find most of the basic shapes 1×1 or 1×2 or 1×4 or 1×8, 2×2 or 2×3 or 2×4, bevels, doors or windows, if you found the right box. The boxes were only 50 cents, and had an average of 12 bricks per box. That works out out to about 4-5 cents per brick. The kits were expensive, but buying the standard boxes was a lot cheaper, and that is what most people did back then. With my paper route, at the age of 7 I could buy 100 pieces per week using my own money. Name any 7 year old that afford to do that now!
Rodimus appeared in the text-based fiction Dungeons & Dinobots as one of the Autobots who attacked the Arch-Ayr fuel dump. Sent to capture rogue Dinobots for the Autobots, he was part of the group that captured Swoop. Together with Blurr, he then tracked Grimlock, but ran into competition with the Decepticon allies Sideswipe and Cliffjumper. After Grimlock bit off his left hand Ratchet replaced it with a circular saw (a reference to one of the original Rodimus' melee weapons in The Transformers: The Movie).
A Supreme sized version of Optimus Prime, based on the Voyager class figure design. When pushed forward, the upper torso spins and transforms, with the transformation sound indicating the completion of the process. The right arm has an axe-swinging action while the left arm has a punching action. Includes show-accurate battle axe that features retractable blades and a spinning jet flame. Also features sound effects and pre-recorded dialogue ("My name is Optimus Prime!", "Let's go!" and "Bring it on!"), as voiced by David Kaye.
Released as part of TakaraTomy's Welcome to Transformers 2010 campaign, the "Sons of Cybertron" set includes a redeco of the 2006 Classics "Ultimate Battle" pack Deluxe class Optimus Prime, cast mostly in translucent plastic (his shoulders remain opaque Polyoxymethylene (POM)). He comes packaged with a similarly translucent redeco of Classics Rodimus.
An absolutely incredible 28 seasons in, The Simpsons writers and producers have had to be unbelievably creative in coming up with a new couch gag for more than 600 episodes. They’ve had a doppleganger Simpsons family walk in on the family, the whole town has absurdly squeezed into their living room, and we’ve toured the inner workings of Homer’s body.
Not depicted in the instructions or stock photos, Roller can attach to Prime in vehicle mode via two tabs on the vehicle front which slot into two corresponding slots on Prime's feet. Another undocumented feature is that the butt of the Ion Blaster can be inserted between the barrels of Roller's weapon mode to form a longer weapon. Also not shown in the instructions but depicted on the stock photo on the card-back is that Prime's shoulderpads can be rotated up; the intended positioning for this is notched, although you can position them at other angles.
Released by TakaraTomy as part of a 2010 promotion honoring the "future era" of the original cartoon (which was set in 2010 in Japanese continuity, you see!), this exceptionally morbid re-release of the Masterpiece Convoy figure recolors the Autobot leader in blacks and greys, representing his dead body from The Transformers: The Movie—but don't worry, kids, it's actually a "sleep mode", according to the figure's name! Limited to 2010 pieces in Japan (see what they did there?), it comes with all its customary accessories, including the Perfect Edition trailer, redecoed where appropriate: the trailer itself has become translucent, its energon-axe is now transparent grey, and Megatron, in another movie homage, is rendered in translucent purple, evoking the scene depicting his transformation into Galvatron. The figure was also released in other parts of Asia as a limited edition of 2010 as well, combined with the Japanese edition for 4020 total. The Japanese version denotes "Serial Number in Japan: ####/2010" on its bio card with the number out of 2010, while the Asian version denotes "C1 - ####/2010" with the number out of 2010 on its bio card.
This occurs in a Japanese toy line, animated series, and mobile video game called Q-Transformers. Specifically, the video game is called Q-Transformers: Mystery of Convoy Returns. Both Bumblebee and Optimus Prime are able to switch between their Generation 1 and movie modes in the series and game-- specifically Q-Transformers: Mystery of Convoy Returns. Strangely, though, when he’s in Generation 1 mode, he’s not a Volkswagen but another small, quirky car: a Daihatsu Copen. The show is pretty meta, with the characters being aware that they’re toys and they even talk about the Mystery of Convoy video game that they’re in.
In the United Kingdom, this Optimus Prime was released as an Argos exclusive along with several other sets branded as part of the Reveal the Shield subline imprint. His United States release was initially claimed to be exclusive to Target by online retailers from Asia, but even though the other Reveal the Shield products eventually became available at Target, Voyager Class Optimus Prime was released as a Toys"R"Us exclusive in the United States instead, complete with a "Toys"R"Us exclusive" sticker. Also, both his United States and Asian releases lack the "Reveal the Shield" logo the United Kingdom release has (but still feature the "Reveal hidden images" call-out).
The energy of the explosion absorbed by the virus, the Autobots dug themselves out and set about recovering their fellows whom Megatron had used to power the cyber-virus in its early stages. Ironhide passed on a message from Megatron — there was a surprise in store for the Autobot leader. Optimus and some Autobots including Superion sped to San Francisco, where Megatron had unleashed Devastator. As Prime battled Megatron, he took time to save three humans who were threatened by falling debris, only for the humans to turn on him. The defeat of Superion turned the tide of the battle against the Autobots. Prime Directive #4
The largest 2007 Transformers movie Optimus Prime toy, Leader Class Optimus Prime featured, at the time, the most accurate representation of the CGI designs' complex transformation sequence. He transforms into a heavily-customized Peterbilt 379 conventional extended-hood, and unusually for a mainline figure, he has rubber tires on all his wheels. His Ion blaster weapon is stored in the rear of the truck's bunk, exposed like an engine block. Though Optimus has no trailer, he has a hole where the fifth wheel hitch is sculpted in the rear of the truck, should owners find a suitable trailer to use. Due to safety reasons, the tips of his long smokestacks are made of rubber. A switch on top of the cab roof activates horn sounds and window lights.
The Japanese version of the toy, named "Optimus Prime Revenge Edition", was exclusively available at Tokyo Toy Show 2009, and later also from e-HOBBY. Despite being sold in Hasbro packaging like the mass retail Revenge toys in Japan (plus the addition of Japanese stickers marking it as a Japanese market release and containing Japanese safety warnings and manufacturer information), it slightly differed from the Hasbro version insofar as it lacked the tampographed kanji lettering.
Tiny Turbo Changers Optimus Prime is a small, stumpy, soft-plastic blind-bagged mini-figure that changes from robot to a licensed Western Star 5700 OP Truck with just a few simple steps. He features ball-jointed shoulders and hands that are compatible with Cyberverse weapons and other 3mm post accessories. Like all Tiny Turbo Changers, his vehicle-mode tires do not spin, sorry.
Although the character was redesigned to some extent, like the other characters in the film, many classic design elements remain in his robot mode including a predominantly red torso, primarily blue legs, the presence of windows in his chest, smoke stacks on his shoulders, and a head design influenced by the original, featuring the iconic faceplate and ear finials. The faceplate is able to retract to reveal a mouth. His weapons include his iconic ion blaster stored in the form of the fuel tanks on his back, and a shell cannon stored on his back, two retractable energon blades that extend from both forearms, which is a homage to Prime's energy axe in the Generation 1 animated series, two retractable energon hooks on both of his forearms, and bladed knuckles. The trailer contains an energy axe, a shield, and flight gear. In the later IDW comics, he displays the ability to produce a holographic driver.
Reissued in 2003 as part of Takara's Transformers Collection line of reissues. This version (#13 in the Collection series) was retooled from the 2000/2002 Rodimus Major tooling in order to make the fists and engine block hole wide enough to equip Firebolt. In addition, the original 2 guns had their posts modified so that a Targetmaster Hot Rod could still use them, if the owner chose to.
"Garbage Truck" is a redeco of the same Optimus Prime toy in blue and white, a common coloration for Japanese garbage trucks that bears ends up bearing a coincidental resemblance to the Bot Shots Polar Assault Team Optimus. His stickers now picture his truck mode being loaded with garbage, his truck mode driving around, and the word "cleaning" in both English and Japanese.
Hot Rod is often portrayed as energetic, yet brash and headstrong, with an overwhelming self-confidence that borders on arrogance. As Rodimus Prime, leader of the Autobots, he is significantly more mature, physically powerful and instilled with the wisdom of the previous holders of the Matrix of Leadership. In a reversal of his behavior as Hot Rod, Rodimus is plagued by lack of confidence in his role as Autobot commander and often doubts his own decisions, feeling both inferior to and in some ways living in the shadow of the previous leader of the Autobots, Optimus Prime.
The Autobots helped repair a Smitco Oil Refinery site which the Lazarus-controlled Transformers had attacked. Optimus had no answer for Spikes accusation that the Transformers' presence on Earth was responsible for the destruction. When Megatron's activities at Lazarus's base were spotted by the military, Optimus insisted on the Autobots going in without backup. They discovered Megatron in the middle of a plan to reformat Earth into a new Cybertron using a cyber-virus. Optimus rejected Megatron's suggestion he should just let it happen, but while the two factions fought, the human military unleashed Operation Clean-Up, dropping a bomb on them. Prime Directive #3
When Highbrow was captured by the Decepticon leader Scorponok, Optimus Prime agreed to surrender himself to ensure his fellow Autobot's safety. Naturally, though, Prime did not expect Scorponok to hold up his end of the bargain, and he had Hosehead and Fizzle rescue Highbrow while he allowed himself to be imprisoned. Their mission successful, Hosehead and Fizzle then sprang Prime from his cell, and the team beat a hasty retreat. Autobot Hostage
One detail not reflected in most of Hasbro's photos is that the sun visors above Prime's windows are mounted on ball joints and can be positioned like they are in his CG design. The hood halves on his arms can slide up on their hinges and the blue panels at the back of Prime's lower legs can be pulled out slightly as well for further screen accuracy.
Jetwing Optimus Prime is a retool of Revenge of the Fallen Leader class Buster Optimus Prime, with an accompanying large jet pack and massive dual Gatling Cannons. The base Optimus Prime figure has several modifications including: a new stomach area and elbow flares to reflect the changes to Optimus Prime's CG model in Dark of the Moon, modified lower arms to incorporate MechTech ports and clips for the cannons, and a retooled area under his back so the jet pack can fit on more securely. The dual energon blades mounted on his arms have been removed. The toy retains Buster Optimus Prime's electronics, but batteries are not included.
In 2016, the figure saw re-release with the Combiner Force packaging. Being the tenth use of the sculpt at this point, some instances of mold deterioration have affected the figure, including: the vehicle front's bumper (which affects the space on the head/front bumper transformation), the headlights, and/or the legs, and the hole on the left shoulder is also prone to develop a stress mark due to the right shoulder's slightly "thickened" peg. Although the re-released badge didn't seem to unlock Optimus Prime after it was scanned, a later update to the game amended this.
Toymaker Fischer Price was the knight in shining armor on this one with the creation of their Power Wheels line. At first, Power Wheels vehicles were very basic with small electric motors and rudimentary Jeep-like styling. Now, Fischer Price has unleashed a car that says "When I grow up, I want to be too rich to care about the environment." This giant bastard comes with tinted windows, a set of dubs and even a fully functional FM transmitter which, no doubt, blasts shitty radio static through its real-live rear subwoofers.
Optimus Prime was given the Matrix by Primus himself, and used to be friends with Megatron. Prowl is his closest friend and Ratchet is his oldest. Searching for Energon, the Autobots landed on Earth, but were followed by the Decepticons. With the help of their human allies, they bested their foes, and knowing they would return, decided to stay and wait to defend the planet once more. Optimus Prime was proud to be an Autobot. I Am Optimus Prime
Prime was brought back to the Autobot base for treatment, but the Decepticons exploited the Autobots' lack of manpower and struck again before Prime recovered. With his men taking a pummeling, the unconscious Prime had a vision of Akira, who spurred him on to awaken and rejoin the battle. With another power boost from Wataru, Prime unleashed a super-charged shot from his ion blaster that took down the fleeing Decepticons. Time of Resurrection
The first in TakaraTomy's Hybrid Style series, Galaxy Convoy is a partly die-cast figure with scaled-down equivalents of the accessories that came with the Leader-class figure. This highly-intricate figure retains all the transformation abilities of the original figure—vehicle, flight mode, robot, and Super Mode—and even its Cyber Key-activated features (even coming with two keys so they can be deployed simultaneously), with additional touches like spring-loaded mechanisms that snap his cannons into place, and hand-grips on the weapons for Super Mode. While he does lack electronics or firing missiles, Prime still includes his Matrix, super-tiny yet still removable, and has four alternate sets of hands: two clenched fists, two with pointing index fingers, two with splayed palms, and two curved hands for holding his various weapon handles. Given the figure's small size, a reconfigurable head was infeasible, so it also comes with an alternate Super Mode head with a mouthplate and crests deployed, though the standard head must be attached in order for the figure to be transformed to vehicle mode.
In the series released by Marvel Comics, before the Great War broke out on Cybertron, the robot who would be Optimus Prime, before he received the Matrix of Leadership from Sentinel Prime, was a Transformer of note, displaying his skills in the Infraformers Sharpshooting Competition. When the war began, Prime quickly made a name for himself as a combat leader of the Autobots.
Also during this time, Micromasters were introduced, and would become one of the last sub-groups of Generation One. Micromasters were tiny Transformers created to compete with the Micro Machines, a hugely popular toy line of the time. While many of the figures had simple transformations and little detail due to their small size, the line eventually expanded to feature Micromaster Transports and Bases, in which Micromasters came with larger vehicles or bases that transformed.
Once combined, DaiKenzan has three new phrases (spoken in Kenzan's voice), while DaiGekisou has four (in Gekisoumaru's voice). In either combined form, pressing and holding the button activates an additional, longer phrase for their "final attack". DaiGekisou is armed with a scissors-esque "shuriken" made from combining Optimus Exprime's two swords, while DaiKenzan simply wields them separately.
Star Convoy was reissued by Takara in 2005, with some notable alterations to his deco: his white plastic was replaced with metallic silver, and the yellow star on his chest was chromed golden. Star Convoy himself retained some of his original decals but most notably his "simulated head lights" and "wind shield panels" were stamp graphed on him, similarly, Hot Rod's were replaced with the same stamp graphing applications. Additionally, where the original toy had been packaged in robot mode in a tall box decorated with the standard Japanese package art of the time, the reissue was packaged in vehicle mode, in a long, wide box more reminiscent of the original Generation 1 toys.
As the battle wore on, Optimus attempted to drive the Autobots too wounded to outrun the Beast themselves to safety, carrying them within his trailer. Jetfire showed up in time to rescue most of his passengers, leaving Optimus to deal with The Beast on his own. Seeing a city coming closer over the horizon, Optimus attempted to reach the Dinobots one last time from within The Beast. As his former troops remained unresponsive, Optimus led The Beast to its doom, blasting it a few more times before leading it to fall into a chasm. Optimus himself was rescued from the fall at the last possible moment by Jetfire’s timely return. As the two of them looked on at the Beast’s inert form, Optimus wondered out loud if their battles would truly ever come to an end. The Beast Within Part 2, Consequences
Punch reported back to Optimus on what he had learned about the Decepticons as Counterpunch. Mainly, that they were planning on attending BotCon 2010. Optimus then turned to Teletraan I for more information about BotCon. Upon learning that special honors would be held for him at the convention, Optimus led his troops to BotCon once more. BotCon 2010 Promo
Like the First Edition figure, Battle Command Optimus Prime's truck kibble can be detached from the robot mode figure to form his separate vehicle mode on its own, but there is one single sacrifice is needed to be made, so brace yourselves: you need to actually trim off the wires that activates it's lights & sound gimmick in order to separate the kibble from the robot, so good luck if you wanna risk your hard-earned cash for that.
Although the original Japanese incarnation of Transformers: Cybertron, known as Transformers: Galaxy Force, was produced apart from Armada and Energon, the series, as originally conceived by Hasbro, was as the third part of the trilogy. The English language dub of the series treats it as such. Consequently, inconsistencies arise between Cybertron and the other two series, but have been explained by the Cybertron comic book, available exclusively through the Official Transformers Collectors Club, as the result of fluctuations in the fabric of reality caused by the Unicron-induced black hole.
China.Org has reported of a potential Beast Wars movie as well as the (still rumored) Optimus Prime movie. Bumblebee movie producer, Lorenzo di Bonaventura was also careful to state that the chances of subsequent movies are riding on the success of Bumblebee at the Box Office. He also mentioned the animated movie was in its writing stage, though with other titles already riding on Bumblebee's success – being in the writing stage doesn't exactly guarantee even the animated movie's - Read More
Like all Predacons Rising releases, the Optimus Prime/Predaking two-pack was exclusive to Target stores in the United States and Canada and to Tesco stores in the UK, and is also supposed to be exclusive to Carrefour elsewhere in Europe (presumably in France and/or Spain, though there have been no sightings as of yet). It has also been found at Rossmann drug stores in Germany and Ripley stores in Chile and popped up at BigW stores in Australia much later, in mid-2014. Also, like all Predacons Rising multi-pack redecos of Beast Hunters Cyberverse figures, the Cyberverse logo is nowhere to be found on the packaging.
Produced by the Chupa Chups lollipop company, this small version of Prime is essentially a battery-powered "holder" for lollipops, which fit behind his head and are spun around by a motor that activates when his pelvis is pressed. Prime has articulation in his shoulders, and his fists feature small holes that allow him to hold and store two more lollipops, in addition to the strawberry sucker he comes with. Weirdly, his Matrix compartment is open instead of having the grill front-and-center.
The Diaclone Powered Convoy figure had several additional features and modes which were mostly excised or left unmentioned for the Transformers release of Ultra Magnus. Principally, Powered Convoy came packaged with "Powered Buggy", who was left out of Magnus's release (see notes below for further details). Omitted from Magnus's instructions is the ability of his chestplate and super robot head to combine to form a small vehicle; the Powered Convoy version of the figure included small rolling wheels on the underside of the chestplate which were removed for Ultra Magnus. Additionally, three additional modes were included in the Diaclone instructions that Hasbro left out: a "preparation base" mode and an "Autobot base" mode were excluded entirely, while the third, a "catapult launcher" mode originally intended and proportioned to accommodate the Diaclone Jet Robo figure that became Starscream, was shown only on the front of his packaging, interacting with Silverbolt. The Japanese release of Ultra Magnus—released as part of the Scramble City sub-line—did include instructions for the preparation base and catapult launcher modes, but replaced the original Autobot base mode with a new configuration.