The figure was released in Japan along with Legends Megatron and Starscream, under the "EZ Collection" banner, in the same packaging as the Hasbro release but with a small card insert featuring the Japanese logo and nomenclature, similar to a USA Edition. As with all the EZ Collection figures, this release features a substantially greater number of paint operations that increase Optimus's resemblance to his larger figure.
The lowest priced toys in the Armada line were three-packs of Mini-Cons. Each larger price point consisted of an Autobot or Decepticon who came with a Mini-Con partner. Mini-Cons could be used to unlock a variety of features on each larger robot, such as firing weapons, electronic lights and sounds, or alternate modes. Some three-pack Mini-Cons combined into other forms or had additional features. According to the storyline, Mini-Cons also enhanced the power of other Transformers, giving incentive to collect as many of them as possible.
Several Autobots and Decepticons, including Optimus Prime, were reformatted into will-less war machines under the control of Cobra. During an initial attack on a human peace conference, Cobra's remote control of Optimus (whom they had nicknamed "HISS-14") mysteriously failed. G.I. Joe vs. the Transformers #1 Later at Cobra's island headquarters in the Caribbean, Cobra scientists pulled Optimus apart to find out what was impeding their commands. As this analysis took place, Optimus reverse hacked into Cobra computers until they shut him down in a panic. G.I. Joe vs. the Transformers #2 Despite this, Prime sent a viral message out to hundreds of email addresses that included the coordinates of Cobra's base. The message was intercepted by G.I. Joe who teamed up with Wheeljack and Bumblebee. After Wheeljack broke the remote control over the Transformers, Prime went after Cobra Commander. G.I. Joe vs. the Transformers #3 More than a bit frightened of a giant robot gunning for him, the human released Megatron, who was trapped in gun mode. Megatron transformed and fought Prime to a standstill until other Autobots came to back him up. G.I. Joe vs. the Transformers #4
Another Hasbro release of the MP-10 mold, which is basically a reissue of the 2010 Transformers line's Masterpiece Optimus Prime, but with the Japanese release's ID Number. Surprisingly he is NOT mistransformed on the initial official photography... until secondary stock photos had the vehicle mode slightly mistransformed. Unlike the original, Hasbro version, this version features silver paint on the interior of the trailer. This version also removes the red paint on the die cast hinge piece in his body and replaces it with blue paint. Sadly, this figure doesn't come with the Key to Vector Sigma. Due to compact packaging, the trailer is prone to scuffing.
Part of the first wave of Prime: Beast Hunters Voyager Class toys, Optimus Prime is a larger, all-new mold. He also transforms into a monstrous, flat-nosed truck, but differs from his Cyberverse toy by having a faceplate-less mouth, and by being equipped with a large four-winged backpack in robot mode. He features a 5mm port for each of his hands, one on his backpack, one near each of his front wheels, and one on each of his two upper wings.
In lieu of combining with the Prime Force, Optimus Prime can also merge with Energon Wing Saber in a similar fashion, with Wing Saber splitting into four components that connect to Prime as limbs. Wing Saber's red and white torso components can become arms for Prime while his legs attach to Prime's own, creating Prime's "Flight Mode", but the parts can also be swapped around, with Wing Saber's legs deploying large missile launchers and becoming arms to make Prime's "Fight Mode". Alternately, Prime can combine with Energon Omega Supreme to form what his packaging calls "Powerlinx Omega Supreme", but which the cartoon named "Optimus Supreme". The Prime Force drones can attach to four connectors on Optimus Supreme's body.
When a new threat, the Elder Gods, appeared, a group of Autobots acquired the help of Tobias Muldoon and Nikola Tesla to travel to the glacier and waken Prime. Infestation 2: The Transformers #1 Tesla's Tesla tower wasn't enough on its own, so Wheeljack, Ratchet, Trailblazer, and Hound gave energy necessary to recharge Optimus Prime. Optimus awoke and revived the other Autobots with his energon reserves, before traveling to Port Cenotaph, Nova Scotia where an Elder God had risen from the sea. Diving into the ocean, Optimus cleaved parts off the Elder God until it and its followers returned to the depths. Though Tobias asked if the creature was dead, Optimus wasn't sure, but promised the Autobots would be there to defend Earth if it ever returned. Infestation 2: The Transformers #2 Infestation 2 #1
Revenge of the Fallen Legends class Optimus Prime is an all-new, much more accurate mold compared to the 2007 Legends class Prime, having a much greater accuracy in both robot and vehicle mode. In particular, his vehicle mode isn't inexplicably missing one smokestack like the 2007 toy. It should be noted that he was molded in only one paintable plastic color, with red and blue deco patterns decked on it. The top of the truck's bunk (ending up on his back in robot mode) has a slot to combine with Jetfire. For some reason, this isn't mentioned in the instructions, though they're hardly needed.
This Japanese-exclusive black-and-gold redeco of First Edition Voyager Class Optimus Prime was available exclusively at the fourteen stores taking part in the Cybertron Satellite promotion. It depicts Prime coated in an alloy reverse-engineered by Ratchet from MECH equipment that protects Optimus against Dark Energon and other techno-biological hazards.
This Optimus Prime is a new mold that matches the character's more cartoony and simplified appearance in the Q-Transformers: Mystery of Convoy Returns cartoon. The "Watashi ni ii kangae ga aru" added to his name means "I have a good idea" (私にいい考えがある). A line originally spoken by G1 Optimus Prime at various times in the Japanese dub of the original cartoon, it has a reputation as a catchphrase of his among Japanese fans and has been reused by many Optimus Primes since, including the Prime in the Q-Transformers cartoon.
There are two versions of the voice changer helmet with two different pre-recorded voices. An earlier release features a voice similar to Garry Chalk, while the later release features the voice of Peter Cullen. The latter version has modified packaging under the 'Try Me!' blurb, stating it has 'Real Movie Voice!', though the updated version has also appeared in the original packaging without the 'Real Movie Voice!' notice.
The second War Within Optimus Prime toy in the Titanium series, but also the first official transforming toy from the War Within series. Personally designed by comic artist Don Figueroa (who created much of the War Within comic designs), Optimus Prime transforms into a Cybertronic truck. He is armed with a silver painted Ion blaster, on which the word "DON" can be clearly seen sculpted into the body.
Platinum Optimus is a redeco of the Leader Class Optimus Prime. Optimus' color palette is now darkened with some additional paint details. His "Sword of Judgment" is now a light blue. Optimus features more chrome on his "Vector Shield", chest, and on his head. The set was a shared exclusive, available from BigBadToyStore and Toys"R"Us, and was also sold during a Taiwanese event celebrating the launch of Transformers Rising.
LEGO is not ignoring the lower priced market, however. As we can see from the chart below, the average price of a set of LEGO has been relatively stable since the 80s2. Even with the average piece count of sets increasing over time, the average price has remained stable. This shows that for all the larger expensive sets being released, they are also releasing plenty of average priced sets that balance out the average. Not only has the size of sets increased but so has the number of sets released per year (prices are in US dollars).
1· To calculate the average price per piece in a year, I took the price per piece of each set made that year, multiplied it by the number of pieces in the set and then averaged all the weighted prices. I used a weighted average because when we are looking at the price per piece we are essentially saying we could buy x number of pieces for y dollars. Larger sets tend to have a lower price per piece so in effect you could get more pieces at that lower price that year. Note: this was done using US retail price data from Brickset.
Omron's keychains were not limited to soft plastic, with die-cast versions of the same characters from the Mascot Keychain line being made available in their Transformers Strap range. This Prime is pretty much identical to the Die Cast Figure version of the character, just a little smaller—about 2.5" in height—and with the addition of a keychain with a wrist-strap.
Laser Optimus Prime transforms into a mid-1990s Western Star 4964EX, pulling a grey and black fuel tank trailer. The sides of the trailer are decorated with a sticker depicting Prime using a flamethrower to burn down a banner with the words "Optimus Prime Octane" on it. The truck is armed with a disc launcher on the roof of its trailer, which launches five blue discs bearing the Generation 2 Autobot insignia as a knob is turned. Like the other "Laser" toys released this year, Prime features electronics powered by two button-cell batteries; in truck mode, pressing the button on the cab's roof causes his headlight to light up with yellow LEDs.
Released as part of a new line called Transformers: Tribute, Orion Pax is a redeco of Titans Return Sergeant Kup, and transforms from a red-and-blue Cybertronic pickup truck which is also an homage to Generation 1 Crosshairs's vehicle mode G1 Optimus's e-HOBBY toy. His Titan Master, retooled from Flintlock, features a new face that is based on the Thrilling 30 Orion Pax toy. As a redeco of the Kup mold, Orion Pax still suffers the leg panel misassembly.
In robot mode, Voyager class Optimus Prime is proportionally more accurate to his CGI design than the leader class toy and has a more accurate headsculpt, but due to the aforementioned lessened complexity significant sacrifices had to be made, such as "cheats" to the transformation sequence, to achieve this and thus he is overall less accurate than he initially appears. In addition to previously mentioned changes, he carries much of the truck's front hood, grill and fenders on his back like a backpack. However, he maintains a superb level of articulation and posability.
The Transformers Animated series was broadcast internationally in 2008 except in Japan, where it aired in 2010. This new series uses a very different art-style from the previous series. The Autobots and Decepticons, while fighting in space for possession of the Allspark, crash-landed onto a futuristic Earth and resume their battle after laying dormant for years. In addition to the Decepticons, the Autobots have to face the human villains as well. Classic characters such as Optimus Prime, Bumblebee, Prowl, Starscream, Megatron, Jazz and Ultra Magnus appear in this series.
I wish I could FIND more of the toys - for some reason my area is a toy desert and it seems to be hard to find good TFs. Of the ones I've been able to find, my favorites are all CHUGs, because I end up wanting to get things that look closest to G1. (Sorry. I'm old, poor, and sentimental.) I have more luck at thrift stores than I do at mainstream stores, so I have a ragtag fleet of oddballs with missing parts/untranformables locked into robot mode, etc.
Hot Rod only appeared three more times: once when he gave the Matrix to a Quintesson-controlled Optimus Prime. When he lost the Matrix, Rodimus was forced to face down his fears once and for all when the Decepticons began a series of attacks on Japan. Overwhelmed by the different responsibilities and directions he was being pulled in, Rodimus went joyriding and was attacked by the Stunticons Dead End and Wildrider, losing the Matrix in the ensuing crash, which was acquired by the Scourge, one of Galvatron's minions, the Decepticons' tracker and leader of the Sweeps. While Rodimus became Hot Rod again – and was not eager to change back – Scourge was warped and enhanced by the Matrix and led another attack on Japan. Counseled by a martial arts master on giri – the burden hardest to bear – Rodimus realized that the Matrix was his burden, and that he had been chosen to bear it; battling Scourge, he recovered the Matrix and resumed his role as leader, and finally when Optimus Prime was resurrected, Rodimus Prime was able to return to being Hot Rod for good. In all three occasions, his return to Hot Rod took place because he lost or passed the Matrix to someone else.
He comes with the Star Saber, which has a 5mm handle and a post on its hilt, as well as two spring-loaded, missile-firing "Ionic Pulse Launchers" (which are called "Eaglefire Missile Launchers" in the instructions). The launchers each feature a 5mm post, have flip open prods, and can peg onto the ports near the wheels on his robot back, giving him a pair of back-mounted rocket engines.
Alternity Convoy transforms into a 1:32 scale Nissan GT-R, featuring die-cast metal parts, an opening hood, trunk and doors, as well as an interior, complete with his feet and thighs being sculpted to form the back seats. This complex figure stands at 6.5" tall, and is armed with a pair of blasters on each arm. In the hyper-dimensional world of the oft-confusing Alternity fiction, this figure specifically represents the Optimus Prime of universal stream Primax 903.0 Beta.
Part of the first wave of the 2015 Robots in Disguise line, Optimus Prime is a smaller-scale toy. He transforms from robot to trailer/truck combination and back! Like every Robots in Disguise Legion Class toy, Optimus features 3mm posts on his hands and arms. Due to the size and simplified transformation, he ends up having 6 wheels instead of 10. His scannable Autobot insignia is on his robot mode left shoulder. However, the badge is completely impossible to scan in vehicle mode.
Optimus Prime led a group of Autobots who left Cybertron aboard the Ark, which was shot down over Earth, sending them into stasis for four million years. Optimus was badly damaged in the crash, and the prognosis wasn't great, but he recovered in time to announce the Autobots had no choice but to involve the humans in their war. Following a battle at Dyson Dam, Prime persuaded Jetfire to join the Autobot team. When the Decepticons headed through the space bridge to Cybertron, Optimus followed, only for him and his team to be ambushed and imprisoned.
Millions of years later, Optimus was one of the thirty-five Autobots rebuilt into modern machines by the ship"s computer. Some time later, Jazz reported that he had spotted Decepticon activity at a nearby construction site. Optimus decided to take a proactive angle to their war with the Decepticons, and led the entirety of his troops to the Decepticon base. Once there, they found themselves allowed in by Megatron, feigning a friendly demeanor. Not fooled by Megatron's claims that he was making an honest living heading a construction company, Optimus engaged the evil robots in combat, before being blasted out of the Decepticon base. Optimus and his troops were sent tumbling down the cliffside beneath their feet. The Autobots suffered only minor damage from the fall, and after getting patched up, moved out once more to stop Megatron's plan, now well under way. Megatron was holding millions of humans hostage in a bid to get the Earth to surrender unconditionally to the Decepticons.
As one of the first Transform Jr toys, this version of Optimus Prime was released under the early name for the series, Transform Gōkin. As a smaller, simplified version of the original Generation 1 Prime figure intended as a low-cost alternative for younger children, Prime features a similar transformation, with a removable head in addition to fists, but lacks rubber tires and translucent windows. As with most other Transform Jr figures, he lacked any of his major accessories, coming only with his rifle and a cardboard replacement for his trailer that had to be assembled by the buyer.
This reissue of the original Generation 2 Laser Optimus Prime figure was made using the modified version of the mold created for Robots in Disguise Scourge, lacking the sculpted Generation 2 Autobot insignias on the disks featured on the original. It sported a modified deco, with the flat grey plastic on both the trailer and Prime's chest now replaced with silver chrome; additionally, new Autobot symbol tampographs were added to the doors of Prime's cab mode and the front end of his trailer, and a pair of new chest-window stickers featuring an illustration of the Matrix of Leadership replaced the original decals.
A larger version of Prime, with Advanced Automorph technology and a more complex transformation procedure. Has two sets of electronic sounds and lights that activate when the head pops up or when you press a button on the roof (in truck mode), and a single projectile weapon that can swing over the toy's right hand. Unlike Megatron (whose head is fixed) and Brawl (whose head is connected with a ball joint), Prime's head is limited to side movement due to the circuitry on his LED eyes. This figure has a folding cannon and a firing missile. With this figure standing nine inches tall and Optimus being 28 feet (336 inches) tall, the toy is about 1/37 scale.
Inspired by the 1985 promotional version of Optimus Prime that featured Pepsi stickers on his trailer, this outlandish incarnation of Prime is a slightly altered version of Takara's 2005 Pepsi Convoy figure (which represented a different character to Prime). The figure was only sold by Hasbro Toy Shop at various conventions, and given away as a promotional prize by Pepsi, via their Mountain Dew brand.
Legion Class Optimus Prime has been found at Family Dollar and Dollar General stores in the United States. A later variant repleaced the red Autobot insignia with a black version. This later version was also released at general retail in Australia, New Zealand, Europe, and Russia. In Singapore it was released together with Bumblebee and Starscream as part of the promotion for Age of Extinction in selected cinemas.
Compared to the Combiner Wars release of the mold, Convoy features additional paint operations on the thighs, truck bumpers, the details on the inner legs, the gestalt chest halves (which are now painted over due to being molded in grey plastic), and the gestalt torso's lower section. The stomach's deco is also minimized, and the silver paint operations on the lower legs are now replaced with gunmetal while the mute metallic blue is now shiny metallic. When it comes to unpaintable plastic; his leg joints and feet are now blue, while the gestalt skirt flap is now the same grey as the arms. In addition, his flip-up gestalt leg panels and thighs are now molded in black, with the latter being painted in silver with some yellow details.
The more interesting "Sky Master Mode", revealed in the "Cybertron Satellite" segment of "Phantom Transformation! Mind-Diving", has him using O.P. as a blaster, two B.2s as leg-thrusters, and two sets of C.L./Jida(!) combinations as back-mounted jet packs. The AMW versions of C.L. and Jida, while not as color-coordinated, are a far more economical option than buying two of each Cliffjumper. Good luck with the second B.2. This mode was created as a "counter" to the aerial combatant Starscream, along with the Energon Sniper Combo Weapon (despite it being a Decepticon-Micron-formed weapon). Apparently, the "Arms Up Mission" game isn't picky about factions.
The third version  would quite possibly have been the most gimmick loaded Transformer in the history of the line, simultaneously being a Powermaster, Headmaster, and Triple Changer. The Headmaster also would have been a Triple Changer, turning into a sort of armored four-wheeled rover (Roller II?) and robot as well as a rather silly looking Optimus Prime head with four vertically aligned wheels jutting off the sides. It seems that when the extra Headmaster gimmick was scrapped, the super mode head remained separate rather than being reintegrated into the trailer hitch such as on the earliest design. Notably, the body of this design is extremely close to the final design.
Thanks to fellow Seibertron user, Sabrblade, we have discovered some new in-hand pictures of the forthcoming Transformers Studio Series #38 Voyager Class Transformers Bumblebee Optimus Prime figure! These come couresty of YouTuber TonTon Reviews, presumably as a preview of his next review. For comparison, they have put this new entry into the Studio Series with MP-10 and Takara Tomy's Movie Advanced series "Classics Optimus Prime" (Evasion Mode Optimus Prime). This gives us a good - Read More
All of the Tiny Titans were sold blindpacked. However: there's a tiny clear window in the back to peek at the item inside, making the task of getting the ones you want easier. Every collectible card included in Tiny Titans has a scannable insignia sticker on it. Scanning the badge unlocks a random amount of Energon "currency" and a randomized bonus power-up item, and can only be scanned once per day. It's honestly quicker and less redundant to say which toys don't have this feature.
An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-HOBBY in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.
The BK tie in toy of Optimus Prime is essentially two toys in one. The first part of the toy consists of two truck halves, which snap together around a sculpted robot mode Optimus Prime. The truck is squat, and primarily blue, with outbursts of chalk gray paint and red flames. Pulling back and letting go activates the gimmick: Prime "drives" forward and bursts from the truck mode, "transformed" to robot mode. This gimmick has marginal success.
Apparently, early plans for the shield were to have it colored gold and silver, but it was later changed to gray and red. When a hand-painted prototype of the toy was first displayed at the 2013 New York Comic Con, the shield was colored yellow and silver; in addition, the original versions of the official Hasbro stock photos also depict the gold color, but the versions featured on the back of the toy's packaging were edited so they would accurately depict the final toy's colors for the shield. Meanwhile, the versions of the stock photos provided to websites and online retailers depict the shield in its final colors for the robot mode, whereas the vehicle mode photo is the unedited version featuring the shield's original colors. Furthermore, UK-based retailer Argos also featured unedited versions of the stock photos for both modes in one of its catalogs, causing some confusion among fans. Sometimes, the spring loaded "Automorph" feature in his head is too strong and causes the head to fly off...
Optimus was able to rally Autobot factions from across Cybertron to the cause and launch an all-out attack on Shockwave's fortress. He headed the assault himself, but broke rank when he saw the image of Shockwave blasting Ultra Magnus upon one of the many monitor screens planted around the Decepticon's headquarters. Optimus charged in to confront Shockwave, beating down all opposition along the way. Coming upon Shockwave's throne room, Prime was greeted by Ultra Magnus, who pointed him towards a secret passage through which Shockwave had absconded. Leaving his wounded brother to rest, Optimus barged into Shockwave's secret chambers, only to be overpowered and have the Matrix ripped from his chest. With it, Shockwave was finally able to activate Vector Sigma. Countdown to Extinction Stalling, Prime listened as Shockwave recounted the history of Cybertron, and eventually Ultra Magnus arrived, having recovered, to attack and defeat Shockwave. Prime and Grimlock helped him escape from the fortress as it crumbled to the ground. With Shockwave's defeat, the Autobots would now be able to start rebuilding Cybertron towards true peace... but Optimus remained troubled by Shockwave's motives; he recognized that Shockwave would not be urged to action by mere fancy. Optimus pondered what greater threat awaited Cybertron for Shockwave to so thoroughly plan for its arrival. Revelation The injuries Prime took in this conflict necessitated a prolonged restoration period in stasis. Both he and Ultra Magnus were tended to by Perceptor and Hoist as they recuperated. Generation 1 #0 Though Magnus recovered in due course, Optimus's systems had received a more severe shock due to the Matrix being forcefully removed from his frame. Thus, he needed additional time spent in recovery before he could reboot. Black Sunshine
Prime's trailer unfolds via a spring-loaded transformation mechanism in a battle station that is positively bristling with varied weaponry. In addition to the disc launcher, it is armed with a "ripple-fire" missile launcher that fires five missiles, an air-powered rocket launcher like the one previously seen on Hero Optimus Prime, and a small laser cannon that mounts on the base's main tower. Both the missile launcher and laser cannon can disconnect and be held by Prime; his LED-fist will illuminate the laser cannon like it does his sword. Additional missiles and a second rocket are stored in grooves inside the sides of the trailer.
Prime's trailer opens up into his Combat Deck, containing the scout drone, Roller. The interior of the Combat Deck features three pegs that can accommodate Prime's laser rifle, fuel pump and nozzle accessories, and seating for two Diaclone drivers. As its central feature, the Combat Deck features a missile-armed repair drone pod mounted upon a boom lift arm (featuring another cockpit for a Diaclone driver), which can also be extended through holes in the trailer's roof and front-end when it is closed. Situated in the base of the boom arm is a spring-loaded launcher that can launch Roller out of the Combat Deck and into action. Roller himself has seating for four Diaclone passengers, and features a port that can accommodate either Prime's rifle or the fuel pump. The interior space of the trailer allows storage room for one standard Autobot car, which can also be shot forward by the launcher.