Limited to 10 pieces, this gold chrome redeco of Evasion Mode Optimus Prime is released as part of the Transformers Battle Command Campaign given away to ten winners via a lucky draw. The initial phase for entry was operated in July 2014, when those wishing to enter the draw had to mail in the proof of purchase from the Takara-Tomy Lost Age Optimus Prime. The actual mailing out of prizes was to take place in November 2014.
The Monster XL also features not one, but TWO barrels with 6 different nozzles per barrel. That adds up to about 36 different ways to put out your best friend's eye. The ludicrous weight and the fact that it takes 43 fucking pumps to get the water up to pressure offer up reasonable disadvantages, but since water gun fights are always half water gun fight and half "who brought the biggest dick" competition, none of that really matters.
A fourth version is shown in the 1987-88 Transformers product catalog that has several minor differences from both Powermaster Prime and God Ginrai, such as having God Ginrai's sliding fists but in red, a completely different trailer hitch assembly partially based on the third design, an offset Autobot symbol in base mode, extended feet also based on third design, far more detailed super mode outer leg panels, completely different front bumper, and the first instance of single faux shoulder smokestacks rather than two. It is still unknown as to why Powermaster Prime has completely different arms from God Ginrai or all earlier concept versions.
An extensive redeco of the Protoform Optimus Prime mold that was exclusively available at the Japanese C3xHobby Convention in August of 2007, and later offered by e-HOBBY in limited quantities. Most of the body is made out of transparent turquoise plastic in order to mimic its frozen state in the "coldness" of space, while orange paint is used on the front end of the "entry" mode, mimicking the heat effects of sudden atmospheric entry. The flame attachment is made out of clear blue plastic, with the tail end being covered in gold paint.
Prime appeared again in the fourth crossover called "Black Horizon". When Hawk, who had been afflicted by the Matrix, began getting dire visions of a new threat, Prime journeyed to Earth. He took Hawk and Flint to Tibet to discover the source of the problem, only to encounter Bludgeon once again. Prime battled Bludgeon and only won due to intervention by Hawk. Fighting their way into a secret city beneath the Himalayas, the trio realized the extent of the threat. At stake was the impending destruction of humanity by Unicron and the world being taken over by Cobra-La. Optimus and Hawk were discovered by Bludgeon and a group of Cobra-La troops. Prime defeated Bludgeon, then, with Hawk and Joe Colton, gatecrashed the Cobra-La ceremony to sacrifice Firewall to Unicron. Prime was mobbed by Cobra-La warriors and pinned down by a monstrous insectoid creature. Prime demolished them in time to save Hawk from Golobulus. With Cobra-La arrested by G.I. Joe, Prime made sure his comrades were okay before sitting down to watch TV with Eject and Firewall.
Ultra Magnus's legendary status was exceeded only by the legendary status of Optimus Prime. Combiner Wars Ultra Magnus toy bio Upgraded with the power of combination, Optimus could combine with any bots to form Ultra Prime. Combiner Wars Optimus Prime toy bio With mastery over the power of Combiners, the combined courage of Optimus and the Autobots would stop the Decepticon Combiners threatening cities and entire civilizations. Combiner Wars Battle Core Optimus Prime toy bio
Bumblebee seems to have finally settled on one mode for the film franchise: the Camaro. Chevrolet had actually stopped producing the Camaro in 2002, after having it in their stable since 1966. It wasn’t without controversy that Bay and company decided to make Bumblebee a Camaro for the first live-action film in 2007, but Chevrolet used the product placement opportunity to help relaunch the brand.
This reissue of the original Generation 2 Laser Optimus Prime figure was made using the modified version of the mold created for Robots in Disguise Scourge, lacking the sculpted Generation 2 Autobot insignias on the disks featured on the original. It sported a modified deco, with the flat grey plastic on both the trailer and Prime's chest now replaced with silver chrome; additionally, new Autobot symbol tampographs were added to the doors of Prime's cab mode and the front end of his trailer, and a pair of new chest-window stickers featuring an illustration of the Matrix of Leadership replaced the original decals.

An exclusive version of Titan Class Metroplex was made available at San Diego Comic-Con 2013. He comes with 12 small, non-transforming figurines of Orion Pax, Megatron, Bumblebee, Thundercracker, Trailcutter, and Hoist, all in both modes. The figurines are based on their Thrilling 30 Generations Deluxe Class toys, and similarly to Decoys, the Autobot figurines are cast in red plastic, and the Decepticons in purple.
LEGO® sets are not cheap toys. They are made to the highest standards and have the price to go along with it.  However, in the past couple decades it seems that the price of LEGO sets has become outrageous. New sets can sell for up to $500 retail and old sets can sell for twice that in a secondary market. This is a children’s toy, right? There is no way LEGO sets have always been this expensive; it is just molded plastic. Let’s take a look at the history of LEGO pricing and try to figure out what is going on.
In reorganizing the company, LEGO became more efficient. The data shows that they have been able to standardize costs and it is likely that they were able to hedge the price of plastic against future price fluctuations. In protecting their business, they have also been able to normalize prices for their customers. A stable price is good for everyone; it helps LEGO ensure that future production costs are budgeted for and it helps the consumer manage their budget. This allows LEGO to protect and grow its market share.
A Mega Super Collection Figure of Prime in his "normal mode" was released a few months after the first figure. He came with a translucent blue Star Saber, and a much larger version of the Convoy Gun accessory, creating a sense of comparative scale, even though he's the same height as the Super Mode figure. Like the Super Mode figure, only his right fist has a peg-hole in it, so he can't hold both weapons at once.
This occurs in a Japanese toy line, animated series, and mobile video game called Q-Transformers. Specifically, the video game is called Q-Transformers: Mystery of Convoy Returns. Both Bumblebee and Optimus Prime are able to switch between their Generation 1 and movie modes in the series and game-- specifically Q-Transformers: Mystery of Convoy Returns. Strangely, though, when he’s in Generation 1 mode, he’s not a Volkswagen but another small, quirky car: a Daihatsu Copen. The show is pretty meta, with the characters being aware that they’re toys and they even talk about the Mystery of Convoy video game that they’re in.

For its release in Korea, Hasbro Asia provided a collector coin featuring truck-mode Optimus Prime on one side and "MP-01L" on the other. The coin came mounted on a card featuring lineart of the Autobot leader's head, the stark black design of which could be mistaken for promoting the earlier "Sleep Mode" release. The limited release (and general lack of enthusiasm for the collector coins in Korea) makes this one of the more difficult Masterpiece coins to find.
This set is a ToysЯUs Japan exclusive, consisting of Powerlinx Optimus Prime (dubbed "Convoy Final Battle Coloration" and redecoed with more show-accurate colours, principally a silver mouthplate instead of red and varying color saturation from the Hasbro version), a "crystal" version of Overload ("Ultra Magnus Special Clear Version") made out of transluscent plastics, and an exclusive X-Dimension redeco of the Street Action Mini-Con Team. This set is entirely "new" content not available in the normal mass-retail Micron Legend line, and is also the last release of "X-Dimension" Mini-Cons. Rather than come with individual bio cards for the various characters, the set came with only a single card for Magna Convoy.
As a 25th anniversary set, Prime includes several new pack-in bonuses: a reprint of the first issue of the original Marvel comic book, a DVD containing all three parts of the animated series pilot "More than Meets the Eye", and three desktop wallpapers, and a battery-powered Autobot symbol that plays transforming sound effects, part of the first version of the Transformers theme song, and three voice clips performed by Peter Cullen: "I am Optimus Prime!", "Autobot, transform and roll out!" and "Megatron must be stopped, no matter the cost." There are some reports that the Autobot symbol could be worn out or damaged during the time of purchase.
Platinum Edition Optimus Prime was only available as part of a 2-pack with Megatron, named "One Shall Stand, One Shall Fall" after Optimus Prime's famous line in the movie. In the United States and Canada, this set was officially released as an Amazon exclusive. It was also available in several of Hasbro's Asian markets (namely the Philippines and Singapore; it's currently unknown whether it was exclusive to any particular stores there or not). In Australia, it was sold at Myer stores, whereas in the United Kingdom, it was both sold at Toys"R"Us stores and available via Tesco's website (but never found in stores). Surprisingly, it was (and still is) a common find in Brazilian online stores.
Alerted by Bumblebee of Megatron's latest plan, Optimus Prime led the mission on Wheeljack's ship to foil them. He sent Bumblebee on an underwater scouting mission, and took part in a pitched battle that ended in the Decepticon's being defeated. Search for Treasure Under the Sea When Rumble dropped rocks on the Autobots, Optimus used Roller to eliminate most of them. Unfortunately he was forced to surrender when he saw the other Autobots had been captured by the Decepticons, and was placed in a special Autobot prison. Luckily Bumblebee remained free, and after he'd rescued the others, Optimus wrapped Megatron up with an iron bar. Bumblebee to the Rescue!
Sure enough, in 2009, when the Hytherion's colossal claw-marks appeared on planets throughout the solar system, Prime's other-dimensional incarnation returned, bringing with him a "Vibrant Red" Vector 109 auto-avatar with which Prime fused. In that instant, he was reborn as part of the Alternity, a manifold being who encompassed all the different incarnations of Optimus Prime through the multiverse at once. Prime reached his hands heavenward and peeled back the layers of reality, exposing the gargantuan fanged maw of the Hytherion looming above the Autobots. From Here to Alternity
Optimus Prime appears in the prequel novel Transformers: Ghosts of Yesterday, where he and a group of Autobots travel in the Ark searching for the Allspark, battling Starscream's Decepticons along the way. While going through a worm hole, the Autobots find themselves encountering a group of humans in a spacecraft reverse-engineered from studying Megatron. With this discovery, Prime realizes the significance of Earth, as both Megatron and the Allspark are there. After saving Bumblebee from a pit of rock-chewing cave worms, Prime battles Starscream. He is about to be gunned down by Starscream and Bonecrusher when he is saved by the human craft. In retaliation, Starscream obliterates it.
A standard brick with two rows of four studs delivers a profit to LEGO that is orders of magnitude greater than any specialized element, all because the brick is what LEGO calls a “universal” or “evergreen” element that can be used in so many different sets. A one-of-a-kind, specialized piece, however, generally works in just one or a few sets. Moreover, the cost of molding a standard brick is orders of magnitude cheaper than producing a specialized piece.
INFOBAR Optimus Prime (ANNIN) is a redeco of INFOBAR Optimus Prime (NISHIKIGOI), transforming into a recreation of the ANNIN edition of the INFOBAR cellphone. All-white in cellphone mode, he sports additional blue and red detailing in robot mode. Like the other figures in this line, he is not a working cellphone but can be paired via Bluetooth with a smartphone, such as an iPhone, to act as a notification alarm in either robot or INFOBAR mode. The screen is non-functional, but pre-printed cards are included which can be slid into the screen to show an Autobot logo, Decepticon logo, a mockup of a cellphone home screen, or a technical "Transformers INFOBAR" design. The figure also includes a display stand.
Fire Blast Optimus Prime is a redeco of the previously released Power Hook Optimus Prime fast action battler. The color scheme is loosely based upon Generation One Rodimus Prime, explained rather oddly in the card bio as being the camouflage Optimus took while hunting Decepticons on Mars post-movie. ...Because there are so many longnose cabs driving around Mars. Yeah.
What makes LEGO sets seem more expensive now is that the effective piece count seems lower. I remember that in the 80s, each set was full of bricks that were not overtly specialized only to that set. So they were useful for more things. Now the sets usually come with less bricks and plates (things that could be useful everywhere) and bring more things like minifigure accessories, flick fire missiles and other things that are not that useful. Although I think that everything was far worse in the late 1990s/Early 2000s than it is now.
Rodimus Prime/Minor is a character who appeared in season 3 of the Transformers Animated series. He is a homage to the Generation 1 version of the character Hot Rod.[17] He wields an energon bow-and-arrow weapon of his own design.[18] On March 31, 2009, Derrick J. Wyatt, lead Transformers Animated Character Designer posted an image of Rodimus' vehicle mode, which is described as a futuristic muscle car that is mostly based on a 2008 Dodge Challenger with some elements of a 1969 Ferrari Daytona. This was revealed at the 2009 BotCon where Hasbro released an action figure of Rodimus Minor. It showed that the 2008 Dodge Challenger parts of Rodimus' vehicle mode were mostly based on the back, top, and sides of the vehicle, while the 1969 Ferrari Daytona parts were found in the front of the vehicle, most notably, the headlights.
The figure also features a hollow trailer (which also serves as his legs), fit for the Warrior Class-sized toys. The trailer can also be converted into a battle station. Because of the toy's design & transformation, he is kinda show-accurate. Optimus also features 5mm-compatible ports on his trailer, arms, shoulders, legs, knees, waist armor, and the pop-out Decepticon Hunters. He also includes many weapons, including his axe with a short handle. The included weapons can also be combined with the Decepticon Hunters into a dual-bladed weapon. All of his included weapons can be wield by any Warrior Class figures, although the accessories are associated with Bumblebee, Grimlock, Sideswipe, Strongarm, Jazz, & Drift.
Although no scannable badge is located at his robot mode, the badge was located at his combined mode's left shoulder. The badge was impossible to be scanned while in-package due to the obstruction of the spring-loaded combiner chest kibble. Speaking of impossible, the badges on the re-releases of the toy can't be scanned by the game. The instruction sheet amusingly replaces Optimus's last picture in the transformation process with Sideswipe.
However, Prime was encouraged to keep fighting by the cheers of a human boy named Junpei. Megatron, surprised at Prime's resilience, attempted to finish his foe off with his Tornado Axe attack. Prime countered with his Double Wheel-Torque Mega-Ton, which trumped Megatron's attack and injured the Decepticon badly. Megatron teleported back to his ship and left Earth's atmosphere, vowing to return.
Prime is loaded with a ridiculous number of features and accessories. The robot itself is highly poseable, and both the smokestacks on Prime's shoulders and the fuel tanks on his legs can be rotated forward to act as guns, even featuring sculpted detail to this effect. As ever, he comes with a trailer that opens up into his crazy-detailed Combat Deck, featuring more action features than ever before. In trailer mode alone, it features a flip-down support stand so it can stand alone, a spring-loaded pop-out ramp instead of a fold-down one, and when the trailer is split for transformation, the traditional support legs underneath automatically swing out into place. The trailer houses most of Prime's accessories, including his ion blaster (with a moveable ammo clip to allow for multiple poses) and energon-axe, as well as his classic gas pump accessory, now with a poseable wire instead of a rubber hose. Two fold-out compartments provide storage space for six of Prime's interchangeable fists, while the other two remain attached the robot: two clenched, two open, a pointing right fist, a tilted left fist (for holding the ion blaster's ammo clip), and two fists with slots to grip the miniscule Matrix of Leadership that fits in a tiny chamber in Prime's chest. The Combat Deck's artillery robot features two flip-out handles that Prime can grip as if aiming the drone's guns, and Roller is also included, with three different 3mm ports to hold Prime's gun and gas pump. Lastly, Prime comes with a rocket pack like those used by the Autobots in such Generation 1 cartoon episodes as "Dinobot Island", and a stand shaped like the Autobot insignia that allows him to be displayed in mid-air, as if in flight. The rocket pack also has 3mm ports for Prime's weapons, and stores on the front of the trailer in vehicle mode.
Unfortunately for both Takara and Hasbro, the Generation Two series of Transformers sold poorly, and Hasbro abandoned it after two years. There were toys planned that never saw release. Most of these were G1 combiner team recolors or recolors of recent figures. Four unreleased molds were released in the Machine Wars line, and four more resurfaced in the Robots In Disguise series.
How to Say Expensive and Mean It - The Seibertron.com Twincast / Podcast reaches episode #213, and the discussion begins with Takara Tomy's upcoming Masterpiece MP-44 Optimus Prime version 3. This toy has a substantial price tag that has caused controversy amongst Transformers fans. In-hand impressions of Transformers Generations War for Cybertron: Siege figures come next, with analysis starting for Deluxe Class figures Sideswipe, Hound, Cog, and Skytread/Flywheels. After that, Micromasters from the Race Car, Battle, and Air Strike Patrols get a look. Weaponizers Lionizer, Blowpipe, and Firedrive come next before the Generations discussion concludes with Voyager Class Megatron and Optimus Prime. A look at the upcoming Generations Select releases of Ricochet and Red Swoop is followed by a quick examination of the recently released Transformers: Botbots lineup. The endings of the long-running IDW Transformers comics continuity comes next, with the end of event book Unicron occurring first. Optimus Prime's namesake series is talked about next before the comics discussion concludes with Lost Light's finale. Bragging Rights close out another episode with early holiday season sales driving the cast's recent purchases.
Doug Smidebush, Lior Keinan , Kelvin Nduka, Thad Standley, Nolan Zak, Adam Franks, Stephen Brown, Loren Roberts, Matt and Nykki Boersma, Tom Morgan, Jack Everitt, John Kovalic, Seiler Hagan, Jess Hart, Will James, Christopher M. Kelly, Roberto L. Vargas, Michele Hall, Chuck Lawton, Ismael Schonhorst, (There are those who call him) Tim, Vladimir Weinstein, Randiman Rogers, Robert Booth, Henry Roenke, Kevin Culp, W. David MacKenzie, Nicholas Richards, John Idlor, Michael Fox, Rob H., Matthew Cody, Dan Callahan, Patrick Kohn, Seth Phillips, Kevin Korpi, Ben MS, Monica, Mark Gonyea, Pharlain Ross, Derick Larson, Furstarter.com

The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno.[19] The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original transformers toy line.
Apparently, early plans for the shield were to have it colored gold and silver, but it was later changed to gray and red. When a hand-painted prototype of the toy was first displayed at the 2013 New York Comic Con, the shield was colored yellow and silver; in addition, the original versions of the official Hasbro stock photos also depict the gold color, but the versions featured on the back of the toy's packaging were edited so they would accurately depict the final toy's colors for the shield. Meanwhile, the versions of the stock photos provided to websites and online retailers depict the shield in its final colors for the robot mode, whereas the vehicle mode photo is the unedited version featuring the shield's original colors. Furthermore, UK-based retailer Argos also featured unedited versions of the stock photos for both modes in one of its catalogs, causing some confusion among fans.[5] Sometimes, the spring loaded "Automorph" feature in his head is too strong and causes the head to fly off...

What I find more interesting is who’s in this wave. Not only is there Hot Rod and Barricade in ’80s muscle car form, but Optimus Prime in his red G1 Peterbilt truck form (just with movie Optimus’ head! Maybe Bumblebee will explain the origin of his “rip off everyone’s face” fetish). Two versions of Bumblebee round out the wave, his traditional movie-verse Camaro and G1 VW Bug.


In the forest, Trailer observed the lost Red Jet and Yellow Sports Car. He wondered why Red Jet didn't just fly out. The Story of the Lost Plane! Trailer later played in the Quiz! BeCool show with Tank Lorry on his team. The two's answer fumbling and arguments led them to lose the game. Another BeCool, Garbage Truck (清掃車 Seisōsha), was part of one question. The Story of Quiz! BeCool While Yellow Sports Car was explaining BeCool marks to you, Trailer was asleep in his Trailer Base, appropriately displaying his "Zzz..." BeCool mark. The Story of What Do I Know About the BeCool Mark?
A mode for Arms Master Optimus designed for underwater combat, "Aqua Screw Mode" was shown in Cybertron Satellite segment of "Explosive Sword Transformation! Wheeljack and Dreadwing". C.L. and Balo are combined into a propeller engine and attached to his right foot, their GR and G redecoes do the same for the left, and B.H. B is attached to his right shoulder to act as a radar system. He wears Arc S's blade on his right arm and wields the Giga Tornado Cannon Combo Weapon.
In the episode "Along Came a Spider", Optimus discoveres that Elita did survive the ordeal with the giant spiders and was transformed into the technorganic Decepticon Blackarachnia. He offeres to try and help her, but is turned down violently as Blackarachnia has still not forgiven him. However, when she nearly dies trying to use the Allspark key to purge her organic half, Optimus saves her and repeats his offer to help her. She stings him instead, vowing that she will never trust him.

Rodimus and Cyclonus appear together in the story Wreckers: Finale Part II from 2007. During the invasion of Cybertron, Cyclonus and Rodimus come to final blows, fighting each other to a stand-still. Both severely wounded, Cyclonus is about to kill Rodimus when the Predacon Rotorbolt arrives and kills Cyclonus for betraying him. Rodimus then helps Cheetor to drain the power of the Divine Light from Cryotek. When Rodimus is dying from wounds he received battling Cyclonus, Tigatron is unable to save the former Autobot leader, having given up the power of the Vok to save the Predacon Fractyl.[7]
Reissued in 2003 as part of Takara's Transformers Collection line of reissues. This version (#13 in the Collection series) was retooled from the 2000/2002 Rodimus Major tooling in order to make the fists and engine block hole wide enough to equip Firebolt. In addition, the original 2 guns had their posts modified so that a Targetmaster Hot Rod could still use them, if the owner chose to.
Something of a shellformer, Convoy Nike Free is colored primarily white and red in his alt mode of a realistic-looking, scaled-down Nike sneaker, complete with (gratuitously long) real fabric shoelaces. In robot mode he incorporates some additional blue and silver in predictable areas and has a somewhat uniquely-shaped yet instantly recognizable G1-inspired head.

With the failure of the Generation 2 series, Hasbro and Takara decided the franchise needed an overhaul. They went in a new direction and a new beginning. While there had been Transformers that change into robotic animals, the premise of the new line was that all figures would transform into animals with realistic appearances. The Beast Wars toy line was launched in the autumn of 1995, and Mainframe Entertainment produced a computer-generated imagery, or CGI, animated series program to tie in with the new toy line. A fresh idea coupled with a TV series program with strong stories assured this series the success Hasbro and Takara needed, as this series was a giant hit in international markets as well as in Takara's home market, Japan.


As the number of sets released has increased, the harder it has been for stores to parcel out their shelving space. In order to make more sales, decisions have to be made as to which sets will be carried. Not every store can carry the whole product line (not even all official LEGO stores carry the whole product line). This process will favor the sets that drive sales the most, such as the licensed sets. The traditional boxes of bricks are pushed out of the way for the more profitable lines.


In an amusing (but glaring) example of poor quality control in a Takara product, the back of the packaging features a small amount of Engrish, notably the word "kinetic" being written as "Kinetick". The bio also mentions the elemental metal as the "Cyber-Matter" living metal, which is used for the Aligned continuity family. Oddly, TakaraTomy's stock photo of the robot mode figure was later used as a cutout "battle figure" included with Telebi Magazine's Burning Megatron.


The designs for the original 28 figures were made by Kojin Ono, Takashi Matsuda, Hideaki Yoke, Hiroyuki Obara, and Satoshi Koizumi. Hasbro would go on to buy the entire toy line from Takara, giving them sole ownership of the Transformers toy-line, branding rights, and copyrights, while in exchange, Takara was given the rights to produce the toys and the rights to distribute them in the Japanese market.
If Powerglide did not heed Optimus orders, he indadvertedly caused the water supply to be poisoned anyways. If however, Powerglide listened to Optimus’s orders, the Autobots attempted to lure the Decepticons away from the reservoir and into some nearby woods, where the Autobots would have some cover against the Decepticons. Finding themselves under heavy fire before they could reach the treeline, the Autobots were forced to fight back in the open. With Autobots falling beside him, Optimus gritted his teeth and took careful aim at the poison containers the Decepticons were carrying. After taking out both of the planes carrying the poison, Optimus continued to battle Megatron and his Decepticons until nightfall, until the Autobots were finally victorious.
Optimus awakened to the sound of Ratchet's voice. Taking in his surroundings, he noted that he was now in an organic forest, surrounded by unfamiliar Cybertronians. It soon dawned on him that he had been transported to the dimension where Megatron had intended to begin his conquest: the OG World. The 'bots surrounding him were the local counterparts to his own Autobots, including his own doppelgänger! The locals informed him that they had found him thanks to the help of his "companion," a small robotic girl. Before Optimus could puzzle out who this humanoid was, the group came under attack by the local Megatron. Though badly injured, "Cloud Optimus Prime" had the strength to fight alongside "G1 Optimus Prime" against the Decepticons, and protect the girl that had brought the Autobots to him. During the fight, blasts from both Primes' rifles collided with a blast from Megatron's fusion cannon, knocking all of the combatants down. Cloud Optimus Prime ensured that the girl was safe before before his attention was drawn to the horizon by a familiar voice. It was "Cloud Megatron," who had also survived his inter-dimensional trip, and had come to continue his fight against his nemesis. Leap
This figure suffers from a design flaw, in that his knee joint pegs are slightly too big for their sockets, and that the resulting connection is so tight that it makes the sockets form stress marks and eventually crack, or even cracking during assembly. The problem can be remedied by simply sanding down the pegs prior to sliding the legs onto the peg.
In the Escalation miniseries, Megatron engages Prime and, boosted by Ore-13, overcomes him. Believing their leader dead, the rest of the Autobots attempt to buy the newly arrived Hot Rod time to collect the clone. Prime, who had transferred his consciousness to a backup memory in his trailer command post, advised them to exploit Ore-13's weakness and assault Megatron all-out, catalyzing the Decepticon leader's Energon supply and crippling him.
"Hero Mashers" Optimus Prime, Bumblebee and Grimlock took on Megatron in the middle of a busy city. Optimus came to Bumblebee's help while riding atop of Grimlock, swapping heads with his mount to bite Megatron's arm off, getting a hold of the Decepticon's jetpack at the same time. He attached both pieces to himself, and flew around for a bit before returning to the battle. He thoroughly scrambled his pieces with those of his teammates, then took down Megatron with his "dino-fist." Afterwards, the Autobots returned to their normal configurations (though it took them more than one try to do so!) Hero Mashers commercial
A younger version of Prime Optimus Prime is one of the playable Autobot characters in the 2010 video game Transformers: War for Cybertron. In the Autobot campaign, he starts off as Optimus, a warrior who rallies his fellow autobots against the Decepticons following the reported death of their leader Zeta Prime. He succeeds in defending the Autobots' home city of Iacon from Starscream and his forces. Optimus then receives a distress call from Zeta Prime. Knowing that this is most likely a trap set by Megatron, he proceeds anyway with a rescue mission. He lets himself, Bumblebee, and Sideswipe be captured by the Decepticons and is sent to a prison in Kaon, the decepticon capital, in an elaborate scheme to free Zeta Prime and all imprisoned Autobots. He frees all the other prisoners, and defeats Soundwave and his minions Frenzy, Rumble, and Laserbeak, but he is too late to save Zeta Prime. After taking Zeta Prime's body back to the Autobot high council, he is bestowed upon the well earned title of Prime.

A Japanese exclusive, this is a new line of Transformers toys shaped from Disney characters that were first introduced in 2009. Originally revealed in the November 2008 issue of Figure Oh! Magazine in Japan, it was a collaboration project between Takara Tomy and the Walt Disney Company. The first line of the toy series is the Mickey Mouse Transformer which was modeled after Optimus Prime with the same colors as its Transformer counterpart and can transform into a cartoonish trailer truck like the original version. The toy was released on February 26, 2009 following with the Black and White Version a month later on March 26, 2009. A figure of Donald Duck based on both Bumblebee and Herbie the Love Bug, and a second repaint of the Mickey Mouse trailer in Halloween colors, are also planned for release.
In 1984, a volcanic eruption re-activated the Ark, which, in turn, brought the Transformers back on-line. Prime led the Autobots in their opening battles to prevent the Decepticons from plundering Earth's resources, but, following their initial victory, the Transformers were all deactivated by Shockwave. Shockwave killed Prime and leeched the energy of the Creation Matrix from his mind. He used this energy to give life to his creations, the Constructicons. Shockwave was unaware that the Matrix was not just a program in Prime's mind, but a physical object in his chest. Before Shockwave could give life to Jetfire, his next Decepticon, Prime transferred the Matrix energy into the mind of Buster Witwicky. Buster used the energy to turn Jetfire on Shockwave, allowing Prime to reclaim his body and retake leadership of the Autobots. As a reward, he gave Jetfire true life.
Star Convoy was reissued by Takara in 2005, with some notable alterations to his deco: his white plastic was replaced with metallic silver, and the yellow star on his chest was chromed golden. Star Convoy himself retained some of his original decals but most notably his "simulated head lights" and "wind shield panels" were stamp graphed on him, similarly, Hot Rod's were replaced with the same stamp graphing applications. Additionally, where the original toy had been packaged in robot mode in a tall box decorated with the standard Japanese package art of the time, the reissue was packaged in vehicle mode, in a long, wide box more reminiscent of the original Generation 1 toys.
×