Although the animated series ended in the U.S. after The Rebirth, Optimus Prime continued to appear in animated sequences of Transformers toy commercials, progressing from Powermaster to Action Master. He even made an appearance as a computer-generated Combat Hero. Many episodes of the series were re-aired to promote Transformers: Generation 2. During these sequences, computer-generated scenes featuring key G1 characters are borrowed from Generation 2 commercials to serve as opening, closing, and commercial bumpers. Optimus Prime is shown in the opening and closing fighting Generation 2's Ramjet.
This sculpt was redecoed by Takara into a golden Lucky Draw figure and later released in its original coloration with a trailer as a "Perfect Edition" (see below for both), while Hasbro would later redeco it into their Classics-branded "DVD Edition". The mold was also used to make Masterpiece Ultra Magnus and "Convoy Black Version", representing one of many drones built in Prime's image, rather than Prime himself.
Optimus & Shreddicus were initially exclusive to San Diego Comic-Con 2017, where they sold out. A small portion of the run had been held for future sales: Hasbro Toy Shop put the set up for sale for about five minutes on August 14 before selling out. The remainder was available at HasCon 2017's exclusives booth, but again they burned through the stock very quickly.
The internet can be blamed for the size and scope of the secondary LEGO market. On the website, BrickLink, you can find almost any set that LEGO has ever produced. In addition, the site keeps records of trends in the market and value of individual pieces. This site is invaluable to a LEGO collector and has given many the ability to grow their collections. Before the advent of this site and sites like eBay, collecting LEGO required going to garage sales. There are now whole sites dedicated to buying LEGO as an investment, but that is a topic for another article.
The character Optimus Prime appears in the live action films Transformers, Transformers: Revenge of the Fallen, and Transformers: Dark of the Moon as the leader of the Autobots and one of the main protagonists of the three films. In these movies, Optimus Prime is able to transform into a conventional Peterbilt 379 cab, rather than the cab over design of his original Generation 1 body. In Transformers: Dark of the Moon, he regains his first generation trailer. Also straying from the G1 design, Prime's vehicle mode is now decorated with red flames painted onto a blue body à la Rodimus Prime, his Generation 1 successor. The reason for the change was due to Director Michael Bay's decree that mass displacement does not occur when they transform, requiring Optimus's vehicle form to have more mass to achieve the desired size in his robot form.
The instructions neglect to mention that the entire roof of the cab is on a concealed hinge which greatly eases the difficulty of Prime's transformation. For whatever reason, the instructions treat the toy as if the hinge does not exist, going so far as to show Prime's head magically clipping through his chest to transform. The instructions also neglect to mention that his heel/bumper pieces must be slid out until they click, making the figure just that bit more stable, and that the rotating truck door panels on his upper arms can be pulled further out (but not off) from their sockets, allowing more space for the panels to swing around his hood-arms during transformation.
In search of new energy sources, Optimus led a team to central South America. When they spotted Mount Sheelah, their two human friends John and Tim Gordon explained volcanoes, and, believing it to be of possible use, the Autobots went to examine it. During a battle with the Decepticons over the volcano, Optimus was convinced by the two humans to retreat, ultimately saving them when Mount Sheelah erupted. Terror of Mount Sheelah After discovering that the Decepticons were kidnapping humans, Optimus sent Bumblebee to scout the Decepticon base. When Bumblebee returned with the Decepticons' global crystal, Optimus was able to use it to blackmail the Decepticons into letting the humans go. Bumblebee to the Rescue
Part of the first wave of Mini-Con Battle Pack figures, this Optimus Prime figure is a new mold, about the size of a Scout Class figure (In Optimus' case, the size of Cyberverse Commander figure), and scaled with Legion Class figures. Its transformation scheme also takes some cues from the Legion Class figure. Battle Pack Optimus Prime also features a transparent orange battle axe & armor pieces, although the chest armor/flip-up mask piece is needed to be assembled first. The included pieces can be combined into a clawed battle axe, or attached to his body to form his armor (although the flip-up mask can restrict his head articulation). Optimus Prime can totally wield the axe dual-handed. As an undocumented feature, the axe can be stored on his truck mode with the tab featured on Prime's right shoulder.
If Perceptor gave out the right amount of an antidote, the poisoned Autobots were cured. Optimus ordered his troops to ready themselves for the incoming squadron of Decepticons. Perceptor’s antidote did have a side-effect on the Autobots, however; it gave them a fierce battle-fever, making them eager to take on the Decepticons head-on. Prowl suggested to Optimus that they instead opt for a more conniving counterstrike against the Decepticons, and ambush them instead.
Once again Optimus Prime and Megatron were re-engineered, with Prime now a fire truck and Megatron a six changer, whose modes included a dragon, bat, jet, land-craft and a giant hand. Another G1 character to get a new toy for this line was Ultra Magnus, who could combine with Optimus Prime to form Omega Prime. Other combiners were created for the series too, such as Landfill and Rail Racer. Bruticus, a combiner from G1 was also recoloured and introduced into the series, with a coinciding toy re-release. The Combaticons that formed Bruticus were the first of the Decepticons to be introduced into the show along with Scourge, who as a toy was a black repaint of G2 Laser Prime. These were not the only toys to be re-released for this series, with many from past lines being repainted and packaged in RID boxes. Robots In Disguise was responsible for introducing a lot of concepts that would be re-used often in the next incarnations of Transformers.
He does not come with his Mini-Con partner Over-Run in this release; instead, Optimus Prime and his wave-mate Demolishor debuted a new brand of Cyber Key: retooled from the standard Cybertron style key, this version lacked a sculpted insignia, so that any symbol could be tampographed on to it, and featured a Mini-Con-style Powerlinx socket on the back, allowing it to operate the figure's formerly-Mini-Con-activated "punching" feature without the figure itself having to be retooled.
A re-release of the Leader Class figure from the Revenge of the Fallen line, but with retractable forearm hooks (as seen in his battle with Grindor) in place of the blades. In addition, the figure comes with the unmasked head of Buster Optimus Prime and is painted with battle damage effects. A recording of Peter Cullen saying, "We must stop the Decepticons!" is played when his chest is pushed upward via a lever on his waist. Fans have nicknamed this figure "Battle Hooks Optimus Prime" to distinguish it from the other Prime figures.
Released in conjunction with Japanese cellphone maker au, au x Transformers INFOBAR Optimus Prime celebrates 15 years since the 2002 au Design Project that resulted in the INFOBAR cellphone, as well as the 10th anniversary of the live-action films. He transforms into a (non-functional) scaled-down replica of the 2002 au INFOBAR, and in lieu of cellphone functions, the figure can be paired via Bluetooth with a smartphone, such as an iPhone, to act as a notification alarm in either robot or INFOBAR mode. The screen is also non-functional, but pre-printed cards are included which can be slid into the screen to show an Autobot logo, Decepticon logo, a mockup of a cellphone home screen, or a technical "Transformers INFOBAR" design. The figure also includes a display stand.
Ultra Magnus is a redeco of the Diaclone "Powered Convoy" figure, itself a redeco and slight retool of "Battle Convoy", the toy that became the original Optimus Prime figure, sporting a new trailer. One of the last few Diaclone toys to be released in the Transformers toyline, Magnus was recolored from the original toy's dark blue, red and black color scheme into a more patriotic red, white and blue, though his chestplate, which was rendered white in his package art followed a more the blue color scheme of his shoulders. He transforms into a Freightliner COE, towing a car-carrier trailer capable of transporting up to four normal-sized Autobot cars. As with Optimus Prime, his cab transforms into a small robot, which can then combine with the trailer to form a "super robot", although all original Generation 1 fiction prior to the 21st century ignored this and simply rendered the super robot as Magnus's default robot form. To facilitate this combination, Magnus sports a slightly longer front axle than Prime, thereby creating tabs on either side of the cab that slide into grooves in the trailer to help lock the small robot into place. He is armed with a rifle sporting two handles that allow either of his robot modes to hold it, and two shoulder-mounted missile launchers, whose spring-loaded firing mechanism was removed for the Hasbro release of the figure.
The energy of the explosion absorbed by the virus, the Autobots dug themselves out and set about recovering their fellows whom Megatron had used to power the cyber-virus in its early stages. Ironhide passed on a message from Megatron — there was a surprise in store for the Autobot leader. Optimus and some Autobots including Superion sped to San Francisco, where Megatron had unleashed Devastator. As Prime battled Megatron, he took time to save three humans who were threatened by falling debris, only for the humans to turn on him. The defeat of Superion turned the tide of the battle against the Autobots. Prime Directive #4
The percentage in the title is not a turn of phrase nor something inferred in any way, it comes from a quote by Bumblebee movie producer Lorenzo Di Bonventura. Whether Bumblebee is a prequel or reboot (or anything in between) has been a hot topic for fans , especially those who want to distance themselves as much as possible from the previous films made by Michael Bay. These debates have reached Bonaventura who sat down with Metro and explained why to him, the Bumblebee film was 100% a prequel - Read More
Hot Rod is featured again in Maximum Dinobots. Returning to Earth to continue his search, Hot Rod arrived at the gates of the Machination's complex, and Scorponok prepared himself to deal with the intruder. Unfortunately, Hot Rod found himself fighting well out of his weight class as he was man handled by Scorponok, who cheerfully bashed his face in, put out one of his optics and snapped his leg. The Headmasters dragged him into Scorponok's control room where, with absolutely no prompting, the big man explained his entire plan for the Dynobots, Skywatch and the Machination. Hot Rod seemed less than impressed with this rather mundane approach, which ticked Scorponok off enough for him to point out that it was obviously just the first stage in his master plan. He was also warned to remain awed or he'd be of no further interest. When the Dynobots and newly arrived Monsterbots seemed to turn Scorponok's plan on its head, Hot Rod burst out laughing, at which point, Scorponok ordered him taken out and shot. In the lift to the surface, Hot Rod suddenly erupted in flames, killing his captors, but draining his power supply. Weakened and with a crippled leg, he collapsed on the floor.
Hey now, dont lump all geewunners together lol. Im all about g1, and love seeing g1 inspired, yet evolved designs. Such as the bee movie, and the recent toy lines. That said, I do respect others opinions. My son prefers bayverse on most and thats ok. I hate bayverse designs (except barricade and nitro zues in the last movie, badasses) but alot of people grew up on that, and it makes hasbro money, so no reason to hate it all together.
Thanks to TFW2005 user Fc203, we have some screencaps from what appears to be a stop-motion review video featuring Studio Series Shatter, among other Transformers and non-Transformers toys. The screencaps give us a good look at her robot and alt mode as well as a few poses. Like her partner Dropkick, Shatter only comes with one alt mode. However, that alt mode is her car mode and not her aircraft mode; whereas Dropkick is the opposite. She also seems to be sporting a bit more of a generic head that isn’t quite movie-accurate, but the rest of the figure seems to pay a good deal of homage to her pre-jet mode on-screen model.
Certainly the most iconic, and most common, leader of the Autobots is Optimus Prime. But the thing about Optimus Prime is that he dies... a lot. And every time he dies, someone has to take his place-- until he’s invariably resurrected in one way or another, that is. In many storylines, including the original animated Transformers: The Movie, it’s Hot Rod who takes over as Rodimus Prime.
Unlike the other Swordbot toys, Optimus Exprime's kabuto helmets form an integral part of one of his alternate modes. The kabuto helmet designed for use with his DaiGekisou combination forms the head of his dragon form, while the kabuto helmet designed for use with his DaiKenzan combination forms the "tail" of the same. He comes with two HUGE swords (with 5mm handles) which can be attached to several places on his kabuto helmets or either alternate form, held separately in his hands, or held both in the same hand (with one held in reverse-grip).
Powermaster Prime's animation model as used in the commercials and as a character guide for the Marvel comics is a composite of the second and third designs. The body of the model is actually a straight tracing of the concept lineart for the third version (including its different rifles and twin faux shoulder stacks), with a slightly simplified drawing of the second version's head drawn on top.
In Spotlight: Doubledealer, Hot Rod's search was interrupted by Dealer's arrival on Earth, with orders for Hot Rod: find the Magnificence and use it to learn what they could about the Expansion. Hot Rod took Dealer to his hiding spot, which turned out to be the planet where they first found the device. As Dealer and Hot Rod closed on the Magnificence, he went over his first visit to the planet in his mind, and how things could have gone so wrong. Eventually he began to have suspicions, and upon locating the Magnificence, asked it the question that haunted him: had Dealer betrayed him? Sadly, it revealed the truth, and Hot Rod was forced to kill Dealer as the traitor attacked. Looking down on his remains, Hot Rod realized the truth had been staring him in the face, he just had not wanted to accept it. He then used the Magnificence to find out all he could about the Expansion, and relayed the information to the Autobots.
Alerted by Bumblebee of Megatron's latest plan, Optimus Prime led the mission on Wheeljack's ship to foil them. He sent Bumblebee on an underwater scouting mission, and took part in a pitched battle that ended in the Decepticon's being defeated. Search for Treasure Under the Sea When Rumble dropped rocks on the Autobots, Optimus used Roller to eliminate most of them. Unfortunately he was forced to surrender when he saw the other Autobots had been captured by the Decepticons, and was placed in a special Autobot prison. Luckily Bumblebee remained free, and after he'd rescued the others, Optimus wrapped Megatron up with an iron bar. Bumblebee to the Rescue!
In time-honored tradition, Prime's instructions depict the toy with an alternate "pretooled" head – in this case, a version with the faceplate deployed, used on the Platinum Edition and "Rusty" releases of the figure (see below). Additionally, his packaging stock photography depicts him with extra white/silver paint details, especially on his chest and wheel rims, as well as having gray upper arms with red details, among other differences.
MATTY COLLECTOR SPECIAL SALE If you missed out on the original Matty Collector figures, you’re in luck; many items are back in limited quantities! https://www.bigbadtoystore.com/Search?T ... geSize=100 ------------- NEW PREORDERS ------------- TRANSFORMERS STUDIO SERIES Reach past the big screen and build the ultimate Transformers collection with Studio Series figures, inspired by iconic movie scenes and designed with specs and details to reflect the Transformers movie - Read More
The toy itself is a mix of different versions. The cab has the safety modifications, including the shortened smokestacks and longer missiles (and thicker rifle), but also has the modified hitch of the 2011 Chronicle DOTM two pack. Meanwhile, the trailer is the lighter grey version from the 2008 Universe release. This version also seems to suffer from mold deterioration.
The Optimus Prime Kreon in this set is based on the character's rusty, crusty "evasion mode" from the Age of Extinction movie. He has a ferrous-metal backpack, which is used to interact with the magnetic parts in the various sets. In this specific set's case, it's so he can be grabbed by the buildable Strafe's dino-claws, once Strafe uses said claws to open up the "laser" cage made to contain Optimus. (Yeah, we know Strafe appears way after Optimus ditched this look in the movie.)
Categories: Unreleased toysUpcoming toy releasesArticles in need of imagesAction MastersAlternators AutobotsAlternity AutobotsAuthenticsBot Shots AutobotsClassics AutobotsCloud AutobotsCombiner WarsCombinersConstruct-Bots AutobotsContest prizesConvention exclusivesE-HobbyGeneration 1 AutobotsGeneration 2 AutobotsGenerationsGeneration 2 Go-BotsGT charactersHenkei! Henkei! AutobotsKiss Players AutobotsMachine Wars AutobotsMail order exclusivesMasterpieceMusic LabelPlatinum EditionPower of the PrimesPowermastersQ-Transformers charactersReturn of Convoy AutobotsRobotmasters AutobotsSDCC exclusivesTimelines charactersTitanium SeriesTitans ReturnToys "R" Us exclusivesTransformers with three modesUnite Warriors AutobotsUnited AutobotsUniverse (2008)War for Cybertron: Siege
In a rare move, there were no brick and mortar store exclusives in Western markets for the regular Prime line. The "Rust in Peace" special edition of Terrorcon Cliffjumper was available at San Diego Comic-Con and Hasbro Toy Shop, while the "Dark Energon" series of translucent redecos was sold by online retailer BigBadToyStore. All of the "Dark Energon" toys were available at general retail in Singapore and Malaysia, and the Voyager Class figures were also available at general retail in the Philippines.
In 2016, the figure saw re-release with the Combiner Force packaging. Being the tenth use of the sculpt at this point, some instances of mold deterioration have affected the figure, including: the vehicle front's bumper (which affects the space on the head/front bumper transformation), the headlights, and/or the legs, and the hole on the left shoulder is also prone to develop a stress mark due to the right shoulder's slightly "thickened" peg. Although the re-released badge didn't seem to unlock Optimus Prime after it was scanned, a later update to the game amended this.
In addition, it is very difficult, if not impossible for the vehicle mode to tab together properly. The entire cab assembly breaks apart very easily as the tabs lack sufficient friction to keep it together, resulting in either a gap forming between the front windows and the hood or part of the hood raising up. The pipes that are supposed to connect to the bottom of the smokestacks also don't swing out far enough to properly do so if the feet are tabbed together completely. When attempting to complete the cab assembly, it is advised to apply upward pressure on the front side barrels while pushing the cab downwards. A misassembly error is also present on all versions of the mold, where the roof hinges that connect the sides of the cabin are reversed.
The Premium Series Optimus Prime is both a retool and a redeco of the Leader Class Optimus Prime toy. The major selling point is a more movie-accurate head sculpt with longer ears and detailing based on the final CG head design, and a flip-out energy sword to replace the ion blaster that was included with previous versions of the toy. This energy sword is detachable and attaches where the Ion Blaster did, compatible with non-premium Optimus Prime Leader-class-based releases. Because his ears are much longer, the truck roof panel that hides his head now has two holes cut into so the head can fit inside the cabin.
Walmart have uploaded a very nice commercial via their YouTube Channel that we are sure will please your optics. What is it about? This video features several famous and iconic cars like KITT from “Knight Rider”, Ecto-1 from “Ghostbusters”, Lightning McQueen from “Cars”, the Mystery Machine from “Scooby Doo” and even Fred Flintstone’s footmobile. As some of you should expect, our small yellow hero is present here in his Bumblebee Movie VW Beetle design, and with an impressive entrance emulating Ironhide’s jump from the 2007 live action movie.
The main torso-bot is based on Generation 1 Optimus's original body. Two of his limbs are based on Armada Optimus Prime; one "normal" (Inferno helmet), one pre-Earth-body (Knock Out helmet). Another is based on live-action Optimus (Soundwave helmet), and the remaining one (Ironhide helmet)... actually looks to be based on the Optimus-like-but-not-Optimus Micromaster Overload! The heck?
This Collector's Edition Japanese e-HOBBY exclusive was a redeco of Targetmaster Kup, released in conjunction with the 2006 reissue of Kup and designed to represent the character Orion Pax from the Generation 1 television series episode "War Dawn". Orion transforms into a Cybertronic pickup truck and came with both a gun and Barrelroller, a redeco of Recoil. He has full shoulder rotation, though the way his elbows are set up means he cannot make full use of their joints. His legs feature no articulation whatsoever.
Following our last article on in hand images of Studio Series 38 Voyager Class Optimus Prime (from the Bumblebee film), TonTon Reviews (who put up the in hand images), has come through on what they said and posted their review! This review allows us to get the best look at the toy yet, as well as its surprisingly complex transformation. We see the ion blaster included stores between his legs in truck mode to fill in the gap and hold it togethyer. The backpack in robot mode also has 5mm - Read More
Cyber Slammers Optimus Prime is an amazingly cute truck that transforms into an amazingly cute Autobot. "Slam" his robot mode down into car mode and he rolls along for a while, then snaps back up into robot mode. Sure to please the toddler you brought with you to the PG-13 movie! Like most Cyber Slammers, Prime manages to cram most of his vehicle mode's major details into a compact, super-deformed version of that mode.
The seldom seen 5th season re-airing of the show featured the G1 episodes retold by a stop-motion Powermaster Optimus Prime to the live-action youngster Tommy Kennedy. Although no back story was ever provided for how Prime became a Powermaster, the new sequences are said to take place after the four previous seasons. This indicates that Prime became a Powermaster in the original Sunbow continuity.
In late 1993, Hasbro relaunched the Transformers franchise with the Generation 2 line, with production again largely being done by Takara. The subgroups concept was done away with for the first year, but there were no new molds or characters. Generation 2 re-used the molds for many of the characters from the 1984 and 1985 line, but with mostly different color schemes and finishes, as well as different weapons and accessories. Megatron's figure was released later on. As noted previously, Megatron's original alternate mode, or "transformation identity", was a handgun with attachments, but in Generation Two, this was changed to a tank due to safety and security concerns. Most of the 1994 figures were re-releases or recolors of European G1 releases.