Part of the first wave of Prime: First Edition Voyager-Class toys, Optimus Prime transforms into a truck, with a similar (but more complex) transformation to his previous Deluxe-Class toy, and features a faux-kibble window-chest panel as well as a detailed truck cab interior. He comes with a "Cybertronian battle sword" and a "plasma cannon", either of which can peg into his hands. The cannon also features a 5mm peg-hole on the underside of its barrel, allowing the sword (or any other compatible accessory) to mount there as a bayonet. They are stored in vehicle mode by pegging them onto either the 5mm-compatible trailer hitch, or onto each peg-hole beside it, although the instructions tell you to peg the sword facing forwards onto the hitch, with the cannon mounting backwards onto one of the side pegs. His trailer hitch ends up on his right robot leg, and he has a fake, sculpted, equally-usable trailer hitch on his left leg. He features a cardboard stand as with all "First Edition" toys, but the weak adhesive used for its flaps mean it often has trouble supporting the weight of a Voyager class figure for an extended amount of time, the top caving in as the glue gives way.

Optimus made his way to the Primal Basilica, where he found Perceptor standing over the Mistress of Flame's battered corpse. Unable to do anything for her, Prime activated the Basilica's defenses as a means of stalling Trypticon. Learning from Perceptor that Rodimus had given up the Matrix, the two entered the chamber of the Chorus of the Primes to have the Matrix returned to him. Desperate Actions However, Optimus revealed the Matrix was not for him, but rather for Perceptor, as he wanted to make sure it would be taken as far away from Trypticon's grasp as possible. He guided Perceptor to a secret exit from the Basilica and sent the scientist on his way. Run for Our Lives Warned by the Chorus to "beware the power of the Primes", Optimus charged back towards the battlefield and began attacking Trypticon, rescuing Victorion. Optimus led the Combiners in battle against Trypticon, but the Titan managed to hit him, sending him hurtling towards some sharp rubble. Thankfully, he was caught at the last moment by Fortress Maximus. In Good Hands
If Optimus destroyed the duplicate Cosmos, the real one would inform the Autobots of the Decepticons’ schemes, and the convoy would roll out to take on their adversaries. They were soon met by a squad of flying Decepticons, but were at a strict disadvantage against their adversaries as their vehicle modes possessed no weapons. The Autobots nonetheless managed to fight their way to the Decepticons’ base, one way or another, and defeated the Decepticons by using their own gravity weapon against them. Desert Flight
Unlike previous Convoy toys, the cab section did not separate from the trailer, instead forming the arms of his imposing 12-inch tall robot mode. He lacks any sort of leg articulation in this mode, but his battery powered treads can provide him with locomotion. Star Convoy's chest can open to reveal a control center for Micromaster figures such as his partner figure Hot Rodimus to ride in.
This is a new line which features robot versions of various Marvel Comics superheroes (and later more of the Star Wars Transformers figures once it merged with this line). Confirmed figures are Iron Man, Spider-Man, Wolverine, Venom and Hulk. Hulk turns into a tank while Iron Man turns into a jet. Spider-Man becomes a helicopter, Wolverine turns into a 4WD, Venom turns into a turbocharged retro car. They are not to be confused with the Marvel Megamorphs toy line, which also featured transformable mecha piloted by the superheroes. Eventually, the Star Wars Transformers figure joined the line with reissues of previous figures, as well as all new molds.
In "Prime Target", Lord Cholmondeley, a big game hunter, set his sights on the ultimate trophy, the head of Optimus Prime. In order to lure Optimus in, Cholmondeley captured Tracks, Bumblebee, Jazz, Beachcomber, Grapple, Blaster and Inferno. Windcharger and Huffer were able to avoid being trapped. When Cosmos learned where Cholmondeley was keeping the captured Transformers, Optimus Prime accepted Cholmondeley's challenge to meet him alone. Although interrupted by Astrotrain and Blitzwing's attempt to ally the Decepticons with Cholmondeley, Optimus defeated the big game hunter and freed the Autobots. Cholmondeley and the stolen jet were handed over to the Soviets by the Autobots as punishment for his actions.
This is a redeco of Ultimate Optimus Prime. While Prime himself only features a red grill, the trailer has been extensively redecoed, with an ornate golden Chinese dragon being painted on the trailer panels, and the various gray parts of the trailer panels, armor, and cannon being replaced by blue, red, gold, and burgundy. The toy was released as a "Year of the Dragon" Special Edition in 2012, since the Chinese Zodiac sign for that year is the Dragon.
The first Unicron Trilogy Optimus Prime toy transforms into a longnose truck cab of made-up model. His clear-plastic smokestacks can detach and form a double-barrelled pistol that he can hold in robot mode, and a button on top of his head causes his mouthplate to jiggle up and down as if he were talking (the irony being that while this was a familiar trait of G1 cartoon Optimus Prime, in the Armada animated series, this Prime's mouthplate remained static when he talked). He can also hold a large cannon that is stored within his trailer, and his chest flips down to reveal a (non-removable) Matrix of Leadership. He is packaged with his Mini-Con partner Sparkplug.
A very limited number of Gold Masterpiece Convoy figures were given away in a Lucky Draw contest in Japan. The figure uses the same design as Masterpiece Convoy, but every piece, including the windows and weapons, is cast in a gold color, reminiscent of his electrum coating from the episode The Golden Lagoon. The only exception is the tires, which remain black rubber. It comes packaged in the usual Masterpiece Convoy box, with the only telltale sign being the gold lettering in the "Master Piece" label. It's not clear how many were made, but it is thought to be no more than 10 or 20.[1]

Convoy iPod Docking Bay pulls an all-white trailer of similar proportions to his vintage G1 load, with rear wheels and discreet propping feet so it can also stand alone. The trailer transforms (sorta), by rotating a substantial wedge of its full length 90 degrees, kinda like a rectangular Rubik's Cube. This exposes two small speakers and "reveals" an alcove (although a huge gap is still clearly evident in trailer mode) featuring an electronic port in which to plug an iPod or iPod nano, thus becoming a working iPod dock. The dock features three working buttons; power, volume up and volume down, as well as an Autobot sigil indicator light. Included is a wall-plugging (Japanese) A/C adaptor with a long lead that plugs into the reverse of the trailer.

Optimus Prime is the fictional protagonist of the Transformers: Robots in Disguise (Fire Convoy in the original Japanese version) branch of the Transformers universe.[38] Based on the character of the same name, Prime once again leads the Autobots against the Decepticons. His voice actor, Neil Kaplan, does his voice in a style reminiscent of that of Peter Cullen, the voice of the original Optimus Prime. Wired Magazine nominated Fire Convoy as one 12 most ridiculous Transformers ideas of all time.[39]
In 2016, the figure saw re-release with the Combiner Force packaging. Being the tenth use of the sculpt at this point, some instances of mold deterioration have affected the figure, including: the vehicle front's bumper (which affects the space on the head/front bumper transformation), the headlights, and/or the legs, and the hole on the left shoulder is also prone to develop a stress mark due to the right shoulder's slightly "thickened" peg. Although the re-released badge didn't seem to unlock Optimus Prime after it was scanned, a later update to the game amended this.

Optimus Prime is a redeco of Revenge of the Fallen Optimus Prime with predominately red forearms and red/silver thighs, which it was meant to be a Generation 1-inspired deco. He comes bundled with redecos of The Fallen, Megatron, Jetfire, and Starscream in a Kmart-exclusive five-pack. To date, this is the only Hasbro release of this figure that acknowledges the combining feature between Jetfire and Optimus Prime.
The toy's primary gimmick is its auto-transforming trailer, which assumes one of three configurations when triggered by an infra-red signal transmitted from the cab robot. Transforming the cab into robot mode will cause the trailer to automatically flip open into a battle station for Mini-Cons, which Prime can stand in the centre of. The base features a central tower with a pop-out artillery emplacement and a mount for Prime's large cannon; a rotating missile-firing turret; two Mini-Con storage bays, one of which featured a manually-activated tab to launch Mini-Cons out; and two live Mini-Con hardpoints, one of which pops up a non-firing turret, the other activating a laser noise.
The earliest version, as shown in the first patent application for the toy, was to have the Prime cab be a triplechanger, turning from truck cab to jet or robot[3]. The nosecone of the jet and robot legs were released by the Powermaster lock in the same fashion as the legs in the final version. Optimus would have had winged arms in non-super robot mode. The super robot mode's head was also integrated into the trailer's hitch... and lacked a faceplate.

The second Optimus Primal toy was an ape in the Ultra size class. Though the transformation from primate to humanoid was a relatively simplistic one, the toy compensated with more than a fair share of weaponry and action features. A compartment on his right forearm opened to reveal a skull-shaped mace he could hold in his fist. His left forearm could open into a double-barreled missile launcher. On his back were two spring-loaded missile launchers which auto-flipped over each shoulder. By pulling a lever in the center of his back, both arms would either spin at the bicep or bend in and out at the elbow, depending on the placement of notch-buttons located on either bicep. This gimmick was shown to be an effort to simulate a gorilla beating its chest while Optimus was in beast mode, but could also be used in robot mode, making him swing his weapons wildly before himself. And finally, like many first-year Beast Wars toys, a battle mask/"mutant head" could be deployed over his robot head.
The G.I. Joe line of toys has always been the definition of "action figures," featuring moving joints, changeable outfits and ripped man-bodies underneath. If this all sounds a bit gay on paper than it should be noted that G.I. Joe figures are all armed with a vast array of weaponry. Also, if you ever suggest that Snake Eyes might be gay, make no mistake, you will be dead before you even see the movement in the darkness.
The Hasbro release comes with a pack-in file card. In addition to the regular version, Optimus was also released in a special "advance release" assortment alongside Bulkhead, Megatron and Starscream, with each figure including a mini-DVD that contains the Transformers: Prime episode "Masters & Students". Yes, all four of them come with the same episode.
The "Underbite Jetpack Takedown" Optimus Kreon uses the new 2015 style of Kreon hips and torso, with a hollow hip-peg and a central post inside the torso for increased grip... which also makes them incompatible with about four years' worth of Kreons. Based on his appearance in Robots in Disguise, he features a new version of the Optimus helmet, this time lacking a moutplate. He attaches to an included jet pack, armed with two pressure-launch missiles.

Released as part of the Target-exclusive Reveal The Shield subline, this Tiny Turbo Changer 3-pack contains a redecoed Optimus Prime and Bumblebee (in their first non-blindpacked release) and a new Steelbane figure. This version of Optimus features red wheels & Tech Spec-esque patterns on his robot mode chest and... groin-flaps, though the real decoding is on his vehicle mode roof, which when seen through the attached clear-red weapons (or similar plastic device) reveals... an Autobot symbol. Surprise.
The paint deco is... unfocused, to say the least. In vehicle mode, the grill, headlights, and bumpers (and thus his feet) are painted silver, yet the red in the small Autobot insignia has been removed. There is silver paint on the fuel tanks (toy battery cover), but not on the other tool boxes and equipment in the same location. There is also silver paint on all 6 wheel rims, the air cleaners, and the windscreen visor. In robot mode, the silver paint is mainly located on his thighs and crotch, though in order to save on costs, the dark blue and gold paint on his thighs and knee joints have been sacrificed.
Released as part of the Single Pack assortment, Optimus Prime is a show-accurate, non-transforming die-cast vehicle based on his alternate mode. He features through-axle construction, allowing for super-speedy racing on smooth surfaces, and his car mode is compatible with many tracks and playsets from Hot Wheels and Matchbox. He features 4 wheels, as opposed to the Legion Class' 6 wheels & his larger toy's 10 wheels. Optimus Prime also comes with a collector's flyer.
The new One-Step Optimus Prime toy transforms from a trailer truck into a robot in just one easy step! The toy features a similar transformation to the other One-Step Optimus Prime and One-Step Changer Movie Hound. The figure is only available as a "Special Edition Figure" in a 6-pack with the One-Step figures of Bumblebee, Steeljaw, Grimlock, Sideswipe, and Underbite, all of which are unchanged from their individual releases. This set was exclusive to Target stores in the United States and to Toys"R"Us stores in Canada.
In Super Mode, Optimus Prime can combine with Leobreaker to form "Savage Claw Mode", which sees the feline Autobot become a gigantic clawed arm for his leader. Alternately, if Prime's backpack is removed, he can merge with Wing Saber into "Sonic Wing Mode", with the aerial ace forming a new winged backpack and chestplate for Optimus, and providing him with new hand-held sword weapons and firing missile launchers that connect to his Super Mode boots. The nature of the combination means that the two partners cannot combine with Prime at once—at least, not without physically removing one of Prime's own arms.
Voyager Optimus Prime is a redeco of the toy from the first movie's toyline. Like several redecos or retools of 2007 movie toys, there has been some effort to make this release noticeably different from the previous releases, though the toy ends up looking less accurate to the actual movie appearance than those previous releases. Optimus Prime has a sort of faded Autobot logo on the side of the truck's bunk, and kanji (Chinese characters) on the roof (ending up on his knee in robot mode.) The word "上海将军" means "Shanghai General", while "大将" means "Grand general".

Although the character was redesigned to some extent, like the other characters in the film, many classic design elements remain in his robot mode including a predominantly red torso, primarily blue legs, the presence of windows in his chest, smoke stacks on his shoulders, and a head design influenced by the original, featuring the iconic faceplate and ear finials. The faceplate is able to retract to reveal a mouth. His weapons include his iconic ion blaster, a Barrage cannon, two retractable energon blades that extend from his forearms, which is a homage to Prime's energy axe in the Generation 1 animated series, and two retractable energon hooks that extend from his wrists. The trailer contains an energy axe, a shield, and flight gear. In the later IDW comics, he displays the ability to produce a holographic driver.

In his first appearance in the series, Optimus looks similar to the original G1 Optimus Prime until he copies himself with a semi-truck and his design in robot mode changes. Soon after, he retrieves his Mini-Con partner, Sparkplug Witwicky. The cab of his truck mode detaches to form Optimus himself, while the trailer transforms into a battle station mode operable by Optimus and several Mini-Cons. Optimus can also combine with his base to form a "Super Mode" robot that, when combined with Sparkplug, can fire a series of powerful lasers. Additionally, Optimus can combine with Jetfire and/or Overload in his Super Mode for additional power.[10]

Separate from the retreading and cartoon accuracy and backpack stuff one persons comment hit home for me as to why I will buy this new Optimus. It likely has the hyper articulation that they did in Sunstreaker and Megatron. So I will buy it for that to match Megatron. Let’s face it. mP-10 has a lot of nice things but even when it first came out I thought it had gorilla arms compared to mp-01.
A new series of reissues means a new release of the original Generation 1 Optimus Prime figure, and Takara's Encore series proved no different. This edition of the figure featured no extra accessories, but it did include the original, thick-barrelled version of Prime's rifle, as reinstated to the mold by the Transformers Collection version of the toy a few years prior. Both his blue and red plastics are lighter than normal, though not to the extent of Hasbro's 25th Anniverary releases. Notably, this edition addresses the small but persistent issue of Prime's shoulder-sticker: the figure's shoulders are textured with small bumps, which had, since 1984, made evenly applying the Autobot symbol sticker to his left arm a challenge. Encore Prime finally replaces the sticker with a tampograph, and also adds one to his right shoulder for symmetry.
A very limited number of Gold Masterpiece Convoy figures were given away in a Lucky Draw contest in Japan. The figure uses the same design as Masterpiece Convoy, but every piece, including the windows and weapons, is cast in a gold color, reminiscent of his electrum coating from the episode The Golden Lagoon. The only exception is the tires, which remain black rubber. It comes packaged in the usual Masterpiece Convoy box, with the only telltale sign being the gold lettering in the "Master Piece" label. It's not clear how many were made, but it is thought to be no more than 10 or 20.[1]
1 is the TF/ Evangelion crossover edition of MP 10 Optimus Prime. Honestly Im not familiar with Evangelion but OP in purple and green is just sick. 2 is the MP version of Sideswipe, but Takara calls him Lambor. 4 is the "marlboro edition" Diaclone repaint of MP Wheeljack. It was supposed to be released in March, but Phillip Morris blocked its sale in the U.S. bc they suck. Luckily my homeboy /u/dajoeker was able to help me get a hold of one.
Like several new-mold Revenge of the Fallen toys, Optimus Prime suffers from some cost-cutting measures that affected the final production version of the mold. According to Hasbro's stock photos/back-of-box photo of the hand-painted prototype, the toolboxes on the sides of his legs were designed to fold away further for a sleeker, cleaner look. Additionally, the rear tires would have been able to split in half, with the inner half of the tire going inside the outer half to recreate the thin tires seen on Prime's CG design. Some articulation was lost on the toy between Hasbro stock photography and the final release. His fingers are no longer articulated; instead, the entire hand is now one molded piece. Finally, the lower arms appear to have been originally designed so that his hands could slide in or out of them during transformation. Sadly, he also lacks rubber tires, which the original movie Prime did have. Meanwhile, the articulated fingers was later used for the Asia Premium Series & Movie The Best releases.
Studio Series Optimus Prime is an all new Voyager Class mold that transforms from robot into a Peterbilt 379 semi-truck. He comes with a pair of Energon Swords, which can be mounted onto his arms or store on the back of his robot mode or truck mode. The figure combines engineering concepts from his Age of Extinction Voyager Class figure with techniques previously used on Prime: First Edition Optimus Prime. He also features a more subdued color scheme compared to other Optimus Prime figures. Like the rest of the Studio Series figures, the figure prioritizes robot mode scale and thus stands shorter than his Voyager Class wavemate Starscream. The CG renders depict him possessing long smokestacks, but the final product has them shortened... again. He also comes with a cardboard backdrop display depicting the climatic forest battle from Revenge of the Fallen.

Although no scannable badge is located at his robot mode, the badge was located at his combined mode's left shoulder. The badge was impossible to be scanned while in-package due to the obstruction of the spring-loaded combiner chest kibble. Speaking of impossible, the badges on the re-releases of the toy can't be scanned by the game. The instruction sheet amusingly replaces Optimus's last picture in the transformation process with Sideswipe.
If Sparkplug suggested that the Autobots remained in their vehicle modes, he would concoct a plan where the Autobots would help evacuate the entire town in their vehicle modes. With no more than four trips in and out of the city, Optimus and the rest of the team carried out the plan without incident. The Autobots then transformed and engaged the approaching Decepticons, whom they easily dispatched. With the city safe, the Autobots moved out to help their comrades at the Decepticon fortress.
GT-R Prime was racing against GT-R Saber and GT-R Maximus when they were rudely interrupted by GT-R Megatron, a ruthless racer out to prove his worth by defeating all others. A fight broke out, but Prime interrupted it and convinced Megatron that they all shared the same need for speed, persuading him to settle things with a race instead. Transformers GT: Mission GT-R
The official international Transformers convention is BotCon, but other fan events include Auto Assembly and TransForce in the UK and past Transformers only events have included BotCon Japan, BotCon Europe and "OTFCC". The first larger Transformers convention in the Nordic countries is called "The NTFA Mini-Con", with official support from Hasbro Nordic, and was held by members of the NTFA - The Nordic TransFans Association, for the first time on November 3–4, 2007. The second NTFA convention with official support from Hasbro Nordic, now renamed "NordCon" (to avoid copyright problems with the name "Mini-Con") was held in Aalborg, Denmark from 19 June to 20 June 2010. It featured Simon Furman as a guest of honour. In 2011, NordCon and Auto Assembly joined forces to create a new convention called Auto Assembly Europe, which first took place in Uppsala, Sweden, in November 2011.[6][7]
Ultra Magnus is a redeco of the Diaclone "Powered Convoy" figure, itself a redeco and slight retool of "Battle Convoy", the toy that became the original Optimus Prime figure, sporting a new trailer. One of the last few Diaclone toys to be released in the Transformers toyline, Magnus was recolored from the original toy's dark blue, red and black color scheme into a more patriotic red, white and blue, though his chestplate, which was rendered white in his package art followed a more the blue color scheme of his shoulders. He transforms into a Freightliner COE, towing a car-carrier trailer capable of transporting up to four normal-sized Autobot cars. As with Optimus Prime, his cab transforms into a small robot, which can then combine with the trailer to form a "super robot", although all original Generation 1 fiction prior to the 21st century ignored this and simply rendered the super robot as Magnus's default robot form. To facilitate this combination, Magnus sports a slightly longer front axle than Prime, thereby creating tabs on either side of the cab that slide into grooves in the trailer to help lock the small robot into place. He is armed with a rifle sporting two handles that allow either of his robot modes to hold it, and two shoulder-mounted missile launchers, whose spring-loaded firing mechanism was removed for the Hasbro release of the figure.
×