Billed on his packaging as "BIGGEST Optimus Prime Toy!", Ultimate Optimus Prime consists of an articulated tractor-trailer. The cab can transform into a "normal" Optimus Prime on its own, roughly equivalent to a Voyager in size and complexity, though with a lower degree of screen-accuracy than most large Optimus toys. Prime has 5mm fist holes, as well as additional 5mm ports on his front wheel wells and both sets of external fuel tanks. Four of these remain available in robot mode. The trailer has twelve more 5mm ports. Despite this, the toy comes with no weapons scaled such that the cab-only robot can usefully wield them.
There is definitely a market for LEGO for adults. The modular buildings and other exclusives scratch that itch but there could be so much more. Currently the adult LEGO offerings falls into two categories: sets that look good but are boring to build (architecture) and sets that are fun to build (modular buildings, some Technic). The architecture line is marketed towards adult former fans of LEGO who want something to put on their desk. They can serve as a reintroduction to LEGO for adults.

For some reason: unlike the stock photos (pictured from the right), This Custom Kreon had a slight QC issue to the opaque and transparent helmets: One had two sides sculpted, while the other one has the small flat square sculpt (similar to the details on Hound's helmet) on the right side. Several samples had two different "variants": One with the perfect transparent helmet & a differently-sculpted opaque helmet, while the other one has the opposite. However: later releases fixes the problem by a running change.
The main selling point of the toy is the ability of the truck cab to combine with the trailer to form Super Optimus Prime. The cab portion folded in half and sat in the chest cavity of the trailer's torso, giving him the classic Optimus Prime truck-chest appearance. The two double-barreled cannons were attached to his shoulders and a large, separate head piece was mounted onto the hole on top of the truck cab.
This highly accurate model kit of Optimus Prime is a Japanese exclusive. It is extremely possible, and comes with his two swords that can be mounted either on his fore-arm, or the hand can be removed and it placed in the wrist via ball joint. His appearance is based on his Dark of the Moon look, as it his "Abbs". The head can be made either with the face-plate on or the face-plate of which reveals a detailed face. Interestingly though, he doesn't come with any of the guns he uses in the films, though it is thought he can hold Buster Prime's gun.
Many Transformers come with tech specs (short for technical specifications) printed on the back of the box that they are sold in. The owner of the new Transformer is encouraged to cut out the tech specs and save it. This card has information on the Transformer, and will usually include the character's name, picture, indication of allegiance (Autobot, Decepticon or other), function, a quote, a description of the character, and numerical values of the character's various attributes. Although only the numbers can be truly deemed "technical specifications", the entire card is usually referred to as the Transformer's tech specs. Each specification is rated by a value from 1 to 10, 1 being the lowest, and 10 being the highest.
This new smaller mold of Optimus Prime features a similar transformation to the original toy. Unlike most transformable figures in this line, Optimus completely lacks 5mm fist holes. Compared to the finalized toy, the product photo on the back of the box has a number of deco differences, most notably silver thighs and white accents above the front windows in addition to those below. The same box photo and the more deco-accurate stock photo (right) also neglect to fold out his fists, which is the only other step in his two-step transformation.
When Vector Prime reminisced on some of the highlights of his multiversal career, he remembered many events involving Optimus Prime. Among these events was Optimus Prime using the Matrix of Leadership on the Hate Plague, Shockwave taunting a disembodied Optimus Prime, and Megatron firing on the head of Optimus Prime, creating a time storm that necessitated Vector Prime's intervention to ensure Optimus Prime's survival. Vector Prime: In the Beginning
This Voyager-sized Optimus Prime is an all new mold (with a similar transformation scheme to Age of Extinction Voyager Class Galvatron, notably the shoulders, rooftop backpack, and the leg/wheels combo) based on his Leader Class figure. He features a similar but different transformation scheme, which results in a somewhat clean robot mode, although most of his vehicle kibble hangs on his back. He also features the sword & the shield based on his final design in the movie, albeit the sword being painted similarly to the Armor Knight Optimus Prime's sword. His Sword can store underneath his Vehicle mode or his robot mode backpack, while the shield can be stored on the truck's fifth wheel hitch, which can also tow the trailer included from the Japanese exclusive Mechtech Voyager. Although the pectoral armor can be slightly pushed up a little bit further, the pieces have to actually stop at where the rectangular pegholes are located.

Surely one of the strangest examples of licensed Transformers products, Sports Label Convoy transforms into a shoe. Something of a shellformer, this baffling incarnation of Prime is colored primarily white and red in his alt mode of a realistic-looking (if notably undersized) Nike Free 7.0 sneaker, complete with gratuitously long real fabric shoelaces. In robot mode, he is made instantly recognizable by his incorporation of some additional blue and silver in predictable areas, and a traditionally Prime-styled head. Less traditionally, and somewhat perversely, Prime's feet are sculpted in the likeness of his own sneaker mode, making it seem like he's wearing himself!
The Power Plus series are similar to the Power series, except these come with the core that unlocks extra features. The Bumblebee figures in this series are nearly the same as the Power series versions (Camaro ‘Bee’s Power Plus figure has his unmasked head), so if you’re going to get them, and you want the cores, go with these versions. If you want Optimus Prime at this size, though, you’ll have to go with this version.
Categories: Unreleased toysUpcoming toy releasesArticles in need of imagesAction MastersAlternators AutobotsAlternity AutobotsAuthenticsBot Shots AutobotsClassics AutobotsCloud AutobotsCombiner WarsCombinersConstruct-Bots AutobotsContest prizesConvention exclusivesE-HobbyGeneration 1 AutobotsGeneration 2 AutobotsGenerationsGeneration 2 Go-BotsGT charactersHenkei! Henkei! AutobotsKiss Players AutobotsMachine Wars AutobotsMail order exclusivesMasterpieceMusic LabelPlatinum EditionPower of the PrimesPowermastersQ-Transformers charactersReturn of Convoy AutobotsRobotmasters AutobotsSDCC exclusivesTimelines charactersTitanium SeriesTitans ReturnToys "R" Us exclusivesTransformers with three modesUnite Warriors AutobotsUnited AutobotsUniverse (2008)War for Cybertron: Siege
The Transformers: Prime toyline hit shelves in November 2011. Originally, Hasbro played coy with the series receiving a toyline at all, emphasizing that it was a television series first and foremost. There were initial plans to release a small assortment of three Deluxe figures (Bumblebee, Arcee, and Starscream) in the Generations line before they were moved into the expanded "First Edition" launch line.
A Japanese TV Magazine exclusive, this release of the Super-Con class Prime toy has almost all of his parts cast in translucent coloured plastics—hence the 'crystal' moniker—representing the character's disembodied spark after his destruction in the Armada cartoon episode "Crisis" and resurrection in "Miracle". What that means for poor Over-Run (or "Surge" in Japan), also cast in translucent plastic, we couldn't say! Available via mail-order, only 5000 pieces were distributed in October of 2003.
In some continuities, though, it’s our lovable pal Bee who takes the leadership reigns. In the animated series Transformers: Robots in Disguise, with Optimus having died at the end of the previous series, Bumblebee starts off as the Autobot leader, but he’s apprehensive about it. And he even takes the leadership mantle in the live-action film series; taking over for Optimus, who leaves the Autobots behind to head into space to search for the Seed at the end of the last movie, Age of Extinction.
With Season One of Cyberverse drawn to a close, we have word of a newly-listed Cyberverse DVD currently available for pre-order. Titled ‘Transformers Cyberverse: The Journey’, the anthology consists of 66 minutes of product, which can only be assumed to consist of the first six episodes, given the DVD’s plot synopsis and the title of the collection corresponding to the show’s fourth episode, ‘The Journey’. The DVD itself is listed here by New Zealand based online retailer - Read More

Part of the eighth wave of TakaraTomy Go! toys, Optimus Exprime is capable of changing from a robot to either a train or (something resembling) a dragon and back again. He can also form the torso of either DaiKenzan (with Kenzan forming the upper torso, head, and arms and Gekisoumaru forming the legs) or DaiGekisou (With Kenzan and Gekisoumaru reversed from their roles in DaiKenzan).

Apart from this, Optimus Prime is also the weakest link of the gestalt combination, due to a number of design failures attributed to his torso mode. The square holes-and-tabs used to secure the arms together when in torso mode are too weak to remain locked in place (though a very small amount of copies can secure the arm well), and are prone to falling out of position should an attached arm be moved. The torso mode's skirt plate is also attached to the stomach rather than the pelvis, rendering the waist swivel nearly worthless due to the skirt obstructing articulation.

For some reason: unlike the stock photos (pictured from the right), This Custom Kreon had a slight QC issue to the opaque and transparent helmets: One had two sides sculpted, while the other one has the small flat square sculpt (similar to the details on Hound's helmet) on the right side. Several samples had two different "variants": One with the perfect transparent helmet & a differently-sculpted opaque helmet, while the other one has the opposite. However: later releases fixes the problem by a running change.

Following the battle, Prime began to experience subconscious urgings, leading both the Autobots and the Decepticons to the Arctic Circle. When they arrived, Shockwave was there to arrest them as war criminals. Shockwave had succeeded in ending the war on Cybertron, but Prime soon fell in with a rebel Autobot group that had discovered Shockwave had greater agenda. Rallying transformers across Cybertron to the cause, Prime faced Shockwave, but was defeated and had the Matrix ripped from him and used to activate Vector Sigma. Before Shockwave could make full use of the mega-computer's data, however, Ultra Magnus, Prime's brother, arrived and bested him. The injuries Prime took during this conflict necessitated a prolonged restoration period in stasis, but Dreamwave's closure meant that Prime never appeared in their pages again.


Although the original Japanese incarnation of Transformers: Cybertron, known as Transformers: Galaxy Force, was produced apart from Armada and Energon, the series, as originally conceived by Hasbro, was as the third part of the trilogy. The English language dub of the series treats it as such.[11] Consequently, inconsistencies arise between Cybertron and the other two series, but have been explained by the Cybertron comic book, available exclusively through the Official Transformers Collectors Club, as the result of fluctuations in the fabric of reality caused by the Unicron-induced black hole.
This agenda led the Predacon Megatron to attack the comatose Optimus Prime in stasis on prehistoric Earth, forcing Primal to take Prime's Spark into his body in order to preserve his life while his body underwent repairs. Primal was subsequently mutated into the massive "Optimal Optimus" form, which shared elements of Prime's form, prior to returning the Spark to its rightful place. The Maximals were occupied throughout the remainder of the series protecting Prime and the other Transformers aboard the crashed Ark until the Predacons were defeated. Various monuments to Optimus Prime appeared on Cybertron in Beast Machines, one of them a holographic statue in Iacon that Megatron took control of in order to trick Primal.
Bumblebee had many adventures in his bizarre humanoid form. He wound up in the heart of Cybertron to find the resting place of the creator/god of all Transformers, Primus, and learn of their origin as a race. Later, he went on a quest to find the all-powerful Creation Matrix, also known as the Autobot Matrix of Leadership, but stumbled upon the Cybertronian Decepticon commander, Thunderwing, who blasted away Bumblebee’s Pretender shell.
In Transformers: Decepticons, Optimus Prime lands on Earth along with the other Autobots to stop the Decepticons. Optimus does not appear until Megatron is released and Starscream escapes with the Allspark. Optimus fights Megatron, but is defeated and is killed while Megatron gives chase to his traitorous second-in-command. In the 2009 Revenge of the Fallen video game by Activision, Optimus Prime is among the playable characters.[20]
This Optimus Prime is a new mold that matches the character's more cartoony and simplified appearance in the Q-Transformers: Mystery of Convoy Returns cartoon. The "Watashi ni ii kangae ga aru" added to his name means "I have a good idea" (私にいい考えがある). A line originally spoken by G1 Optimus Prime at various times in the Japanese dub of the original cartoon, it has a reputation as a catchphrase of his among Japanese fans and has been reused by many Optimus Primes since, including the Prime in the Q-Transformers cartoon.
The Transformers: Prime toyline hit shelves in November 2011. Originally, Hasbro played coy with the series receiving a toyline at all, emphasizing that it was a television series first and foremost. There were initial plans to release a small assortment of three Deluxe figures (Bumblebee, Arcee, and Starscream) in the Generations line before they were moved into the expanded "First Edition" launch line.

Hasbro's original plan for the Beast Wars was to have Optimus Prime, renamed Optimus Primal, and Megatron be reformatted versions of their 1980s selves. This was shown in the toys's Tech Specs, and in the comic packaged with the basic Optimus Primal/Megatron two-pack. Hasbro also wanted the "Mutant Heads" found on all of the deluxe sized first year toys as battle helmets, but Mainframe scrapped the idea as it would have required three animation models for each character instead of two. Another designed feature for the 1995/1996 toys was carried over from Generation 2, transparent "light pipe" eyes. However, most toys had those parts cast in opaque plastic.
This miniature model kit of Energon Optimus Prime comes unassembled and unpainted, moulded mainly from white, red and black plastic and featuring some stickers for essential detail. Standing at around 4.5 inches tall, he comes with his Prime Force drones and can combine with them in the usual ways; while Fire-1, Gyro-2 and Digger-3 are moulded in their normal colours, Submarine-4 is stuck being black, and like every other non-color-molded, non-stickered detail on the kit, must be painted by the buyer. Prime's transformation involves removing his feet and head (an alternate Super Mode head is included, as his antenna does not transform into a helmet), and he does not come with a trailer for the Prime Force, but his gun can shoot small orange plastic BBs via a pressure-launching mechanism, and he comes with a small gold-chromed Energon star that fits onto his left shoulder. The kit also comes with "Episode 1" of the "Optimus Prime VS Scourge" mini-comic, printed on the back of the instructions.
It took two further years, but this figure was eventually released as part of the Japanese counterpart to the Alternators line (Binaltech) in 2008. Binaltech Convoy features some additional paint details, like his silver pelvis, additional patterns on his shoulders, and red paint on his engine-gun, and like all Binaltech figures, he also includes die-cast metal pieces. Unlike previous Binaltech releases, a bio-card was not included.
The problem there is that Star Wars took over the Space theme and Harry Potter took over the Castle theme. Just keeping up with the kids- sign of the times. What’s a castle lover to do? Compare 6075 (Castle) with (7094 Kings Castle Siege) and 4757 (Hogwarts) and they all have their own fantastic attributes. Sell the Harry minifigs and buy some crownies- problem solved.
Part of the first wave of the Combiner Force assortment, Optimus is a roughly Scout-class sized figure that changes from his futuristic truck with a combiner chest that doubles as his spoiler into a robot in three four extremely simple steps. His individual robot mode only has limited articulation on his shoulders. He also has a little green arrow above the connector on the truck bumper indicating where to crash him to combine with other figures. A 5mm post hole on top of his vehicle mode can accommodate a compatible accessory or Weaponizer Minicon, though he cannot use it in his individual robot mode.

Being a brand new and intricate remake of the Autobot leader, MP-10 was used as the gold standard in terms of scale for future Masterpiece figures, with all the upcoming releases being sized to best match him. Much like his older incarnation, he was also cherished by collectors, generating heated debates on which version is the best one up to this day.[5]
The "Unicron Trilogy" version of Optimus Prime is a fictional character of this branch of Transformers lore. Appearing in Transformers: Armada, Transformers: Energon and Transformers: Cybertron (known as the aforementioned trilogy), Optimus is the leader of the heroic Autobots. He often converted to his super combat mode. In all three series, Optimus' English voice actor is Garry Chalk, who previously voiced Optimus Primal in Beast Wars and Beast Machines.

Part of the third wave of Prime Cyberverse Commander Class toys, Nightwatch Optimus Prime is a redeco of Series 2 Cyberverse Optimus Prime, using the faceplate-less head sculpt that is gang-molded with the original head. His blue plastic is now gray, his smokestacks and thighs are left unpainted, he loses the Autobot insignia on his right forearm/door, and he gains yellow paint highlights for his eyes and lights, along with various other minor deco differences. Instead of the original release's cannons, he now comes with a pair of swords, which each have a pair of 3mm posts for wielding/mounting.

From this chart, you can see that there has been no real trend in the price per piece in these particular sets. The weighted average (larger sets weigh heavier than smaller sets) for the price is 13.19 cents per piece. The size of the ships did seem to increase in the last couple years; however, 3 data points does not make a trend (I will visit this idea later). For those of you who had a pirate ship growing up (I was lucky enough to get the Skull’s Eye Schooner), you may not have realized it, but it wasn’t cheap. And, the prices in this chart do not take inflation into account.


Interesting work but I would like to know whether you would find the amount of new sets offered in toto has changed over the survey period. Is there an economy of scale at work? This seems to have two implications: first, the number of units for a particular set may have increased thereby affecting the price of all sets belonging to that class (but doubtful you could find exactly how many Death Star sets were produced in relation to, say, hogwarts castles); second, the popularity of certain set classes may affect what kinds of sets are available. Like with language, we are all confined to use the words we know. And so with Lego, set designers are confined to use what’s economical, unless, of course, the design calls for new styled pieces. These relations are difficult to grasp in statistical analyses, but would seem to play a role in price steering.
All of the Tiny Titans were sold blindpacked. However: there's a tiny clear window in the back to peek at the item inside, making the task of getting the ones you want easier. Every collectible card included in Tiny Titans has a scannable insignia sticker on it. Scanning the badge unlocks a random amount of Energon "currency" and a randomized bonus power-up item, and can only be scanned once per day. It's honestly quicker and less redundant to say which toys don't have this feature.
After the Great War, Optimus Prime disappeared with other legends into the mysterious location on Cybertron dubbed J'nwan, where Optimus himself became the "Authority" who spoke on behalf of the others. Sandstorm, the leader of a rebellion in a 32nd-century firmly under the heel of the tyrannical Shokaract, entered J'nwan to plead with the heroes of Cybertron's past for aid. He hoped to convince them to join the fight against the Predacon warlord. After a mind-crushing journey which left all of his companions dead or deranged, Sandstorm finally found an audience with the Authority and his brethren, but they declined to help, with the Authority stating that their time was past and the war was no longer their war. The Authority then in some way manipulated Sandstorm's trip out of J'nwan such that it was comparatively short and simple. Paradox
Available only via mail-order through Dengeki Hobby magazine, this black and gray redeco of Optimus is one of four "Black Body" promotional Robot Masters toys made available through different outlets simultaneously. He came with his normal accessories (it is worth noting his axe was solid silver), plus a chromed-gold clear-red-plastic version of Psycho-Orb's "Calamity Defenser" solitarium shield.
As the battle wore on, Optimus attempted to drive the Autobots too wounded to outrun the Beast themselves to safety, carrying them within his trailer. Jetfire showed up in time to rescue most of his passengers, leaving Optimus to deal with The Beast on his own. Seeing a city coming closer over the horizon, Optimus attempted to reach the Dinobots one last time from within The Beast. As his former troops remained unresponsive, Optimus led The Beast to its doom, blasting it a few more times before leading it to fall into a chasm. Optimus himself was rescued from the fall at the last possible moment by Jetfire’s timely return. As the two of them looked on at the Beast’s inert form, Optimus wondered out loud if their battles would truly ever come to an end. The Beast Within Part 2, Consequences

In the episode "Along Came a Spider", Optimus discoveres that Elita did survive the ordeal with the giant spiders and was transformed into the technorganic Decepticon Blackarachnia. He offeres to try and help her, but is turned down violently as Blackarachnia has still not forgiven him. However, when she nearly dies trying to use the Allspark key to purge her organic half, Optimus saves her and repeats his offer to help her. She stings him instead, vowing that she will never trust him.


The mold suffers from a minor design oversight, wherein the rear Nissan badge collides with his left leg strut when the left foot is hinged over and pegged into a clear plastic socket during transformation, with the results being that the connection is slightly crooked, isn't very secure, and sometimes pops off, and that the crooked pegging often causes the socket to crack.
Aware of the changes to the timestream and the potential for the entire Autobot race to be annihilated by Unicron, Optimus put into motion Operation Distant Thunder, a plan to undo the damage to the timeline caused by Ravage, restoring the events that were seen in the movie. This would mean that saving all the Autobots from Unicron would result in Prime and others such as Prowl, Wheeljack, Ironhide, and Ratchet would die per the original events. They hoped they would be able to at least partially avoid such an outcome by sending a message to their past selves about all they had learned.

On another plane of existence, Optimus travelled the path to the Matrix, guided by the voice of his old mentor Alpha Trion. The path led him to Grimlock, who had also been killed by Megatron; Prime rescued Grimlock from Kremzeek, the demonic eater of souls. At the gateway to the great beyond, they encountered Bludgeon, who announced that only those who bore the "key to Vector Stigmata" may pass through. Prime realized that the wounds on his body form the key, but the angel insisted that these would grant Prime access. Prime took Grimlock's sword and bestowed the key on Grimlock, allowing the former Autobot King to ascend into the Matrix while Prime stayed behind. Transformers vs. G.I. Joe #12
This Optimus Prime is an extensive screen-accurate redeco of the Dark of the Moon Supreme Class/Leader Class Striker retool, using the Ion Blaster accessory from the Buster Optimus Prime and the Toys R Us Japan-exclusive battle blade accessories. He also comes with the Knuckle piece and the Battle Hooks and uses the 2-2-1 articulated fingers featured from the second Asia Premium Series release. He also features a Japanese language sound box for his voice gimmick, replacing Peter Cullen's "I am Optimus Prime" voice line.

Bumblebee - The Transformers live action film franchise's latest installment is out, with Bumblebee hitting theaters last week. The Seibertron.com Twincast / Podcast brings you its review of the movie, with one of its regular podcasters Jon Bailey bringing his insights after providing the voice acting talents for Soundwave and Shockwave in the film. Along with this insider perspective, the cast discusses each significant part of the movie itself, beginning with the "Generation One" inspired opening scene on Cybertron. The new human and robot characters presented in the Earth based adventures are also reflected on, with the cast agreeing that this latest movie is a measurable tonal departure from the approach of previous films in the franchise. After talking through the entire movie's plot and characterizations, speculation about what comes next for Travis Knight, Michael Bay, and the Transformers live action movies comes next. A quick chat about the movie's tie-in toyline follows, and the show concludes with a quick round of holiday season bragging rights about the cast's Transformers related gifts.
Part of the first wave of 2012 Generations Deluxe Class toys, Optimus Prime is based on his Fall of Cybertron design, and transforms from a robot to a Cybertronian truck and back. His ion cannon, based on a weapon seen in his concept art, can mount via either of its two 5mm posts onto ports on his hands, forearms, back, and shoulder smokestacks. The toy is known for being oddly small for an Optimus Prime toy, especially when compared to other toys from the same line. This allows him to be more or less in scale with Grimlock and Bruticus (likewise from the same line), however. Optimus features sculpted fake wheels on his back.
A redeco of the sword-wielding version of Battle Masters Optimus Prime, Silver Knight Optimus Prime is a non-transforming "Rock 'Em Sock 'Em Robots"-like toy with arms that punch through the use of levers in his legs. He can also be placed on the included controller handle, allowing the punches to be activated with a pair of triggers. Optimus Prime was only available in a Target-exclusive two-pack with Grimlock.
This Collector's Edition Japanese e-HOBBY exclusive was a redeco of Targetmaster Kup, released in conjunction with the 2006 reissue of Kup and designed to represent the character Orion Pax from the Generation 1 television series episode "War Dawn". Orion transforms into a Cybertronic pickup truck and came with both a gun and Barrelroller, a redeco of Recoil. He has full shoulder rotation, though the way his elbows are set up means he cannot make full use of their joints. His legs feature no articulation whatsoever.

We may be four days in 2019, but that certainly isn't too late to post a special New Year's message from everyone's favorite yellow Volkswagen Beetle, right? To promote the upcoming Bumblebee Movie premiere in Japan in March (that's right, March!) a New Year's video message from Bee himself has been posted to YouTube and Twitter. What the actual message says we don't know, but we'll update when we do. The message is then followed by a full scene clip (in English with Japanese subtitles) where - Read More


Another game was released for the Sony PlayStation 2 by Atari; simply titled as Transformers, it was based on The Transformers: Armada. The game's reception was mixed, particularly due to the popularity of a PS2 Transformers game released at the same time for a Japanese-exclusive market, though the Armada game was of a higher quality and featured much better gameplay. The game not released in America was based on the Generation 1 storylines.

In 1989, the entire line became limited to Pretenders and Micromasters. For the first time, the Transformers received a new design for their title logo. But many also regarded this as a time of a dearth in creativity and the lowest point in the toyline's history. The year 1990 saw the last American burst with the release of more Micromaster characters and the introduction of the Action Masters, non-transforming action figures who came with Transforming companions. Larger Action Master sets came with transforming vehicles and bases. The Action Master line was criticized for its perceived desperation for a gimmick, although it had a few defenders. The line predictably faded and would be the last Transformers output in the US until 1992.

A golden-chrome redeco of Cybertron Metroplex was offered as a contest prize in the December 2005 issue of TV Magazine, and came with an equally blinged-out Legends/EZ Collection Optimus Prime figure. Fifteen of this set were available as prizes in the initial contest; a single Metroplex was later offered as one of many prizes in a Takara website contest, but this version came only with the standard metallic paint version of Prime.


This is a redeco of Ultimate Optimus Prime. While Prime himself only features a red grill, the trailer has been extensively redecoed, with an ornate golden Chinese dragon being painted on the trailer panels, and the various gray parts of the trailer panels, armor, and cannon being replaced by blue, red, gold, and burgundy. The toy was released as a "Year of the Dragon" Special Edition in 2012, since the Chinese Zodiac sign for that year is the Dragon.


Part of the first wave of Bot Shots Series 1 launchers, this repaint of Optimus Prime comes with a large trailer that pops open to form a battle station with a spring-loaded launching platform. He appears to have the same plastic colors as the single release, and the same set of paint operations, but his paint is done in different shades, having glossy dark blue paint and glossy bright red paint. The black part of his launcher is sculpted to look vaguely like the repair done that is part of Generation 1 Optimus Prime's repair bay.
In reorganizing the company, LEGO became more efficient. The data shows that they have been able to standardize costs and it is likely that they were able to hedge the price of plastic against future price fluctuations. In protecting their business, they have also been able to normalize prices for their customers. A stable price is good for everyone; it helps LEGO ensure that future production costs are budgeted for and it helps the consumer manage their budget. This allows LEGO to protect and grow its market share.
Prime's body was entombed in a massive deep-space mausoleum with the many other fallen Autobots. In 2006, his grave was desecrated and his body reanimated by Quintessons in an attempt to destroy the Autobots by using Prime to lure their space fleet into a trap. The Matrix was able to purify Prime of the Quintesson influence, and he ordered the other Autobots to clear out while he piloted his flagship into the Quintessons' detonator, triggering the explosion of a nearby sun. Prime was supposedly destroyed in the explosion. According to "The Return of Optimus Prime", Prime's body was recovered from the craft by two human scientists, Jessica Morgan and Gregory Swofford, just minutes before the explosion. As their ship departed, it was coated with solar spores, which induce rage and madness in any sentient being they came into contact with, released by the explosion of the sun. Jessica's father, Mark Morgan, loathed all Transformers, and his hatred only grew when an attempt by the Decepticons to steal a heat-resistant alloy he had developed resulted in Jessica being paralyzed. Swofford and Morgan reconstructed Optimus Prime's body, planning to use it as a delivery system for the spores in order to destroy the Transformers.

Part of the eighth wave of TakaraTomy Go! toys, Optimus Exprime is capable of changing from a robot to either a train or (something resembling) a dragon and back again. He can also form the torso of either DaiKenzan (with Kenzan forming the upper torso, head, and arms and Gekisoumaru forming the legs) or DaiGekisou (With Kenzan and Gekisoumaru reversed from their roles in DaiKenzan).

Optimus Prime led a group of Autobots who left Cybertron aboard the Ark, which was shot down over Earth, sending them into stasis for four million years. Optimus was badly damaged in the crash, and the prognosis wasn't great, but he recovered in time to announce the Autobots had no choice but to involve the humans in their war. Following a battle at Dyson Dam, Prime persuaded Jetfire to join the Autobot team. When the Decepticons headed through the space bridge to Cybertron, Optimus followed, only for him and his team to be ambushed and imprisoned.
Though he was packaged on an individual box, he was initially sold as part of a set with Dark Energon Megatron. He was eventually made available on his own, and all of the Dark Energon Series toys were eventually made available in Singapore as mass-retail releases. The Voyager Class toys, in particular, also saw mass-retail release in the Philippines.

A minor redeco of Beast Hunters Voyager Class Optimus Prime that has the gray parts cast in a darker plastic shade, lacks the black paint operation for the Star Saber's hilt, changes the color of the side windows' paint operations from yellow to green, adds yellow paint operations for the headlights and lacks the silver paint operations above the front windows.
A figure of Prime combined with Jetfire was released as part of the second Big Transformers wave, which came with no accessories of its own, but could hold any of the weapons released with the other second wave figures, including Jetfire's gun, the Star Saber, the Skyboom, and the Requiem Blaster. As with the first wave figures, he came packaged with Ramune candy.
Over twenty-plus years, there have been a bajillion releases of this mold, some identical to the original toy, and some featuring significant variants with notably different paint jobs, color schemes, accessories and other pack-ins. We have striven to list all these variants on this page under their respective series; for a quick-reference list of all variants and releases check here. The cab robot has also been used sparingly to represent different characters; outfitted with different trailers, it has become Generation 1 Ultra Magnus and Pepsi Convoy.
×