In the past 80 or so years, the yo-yo has seen some pretty mundane innovations, such as a ball bearing axle for better spin efficiency and the addition of flashing lights, to name a few. But finally, someone has rolled up their sleeves and is ready to fuck shit up all over the yo-yo world. Meet the ReGEN; half yo-yo, half MP3 player and just a pinch retarded.
Prime's trailer opens up into his Combat Deck, containing the scout drone, Roller. The interior of the Combat Deck features three pegs that can accommodate Prime's laser rifle, fuel pump and nozzle accessories, and seating for two Diaclone drivers. As its central feature, the Combat Deck features a missile-armed repair drone pod mounted upon a boom lift arm (featuring another cockpit for a Diaclone driver), which can also be extended through holes in the trailer's roof and front-end when it is closed. Situated in the base of the boom arm is a spring-loaded launcher that can launch Roller out of the Combat Deck and into action. Roller himself has seating for four Diaclone passengers, and features a port that can accommodate either Prime's rifle or the fuel pump. The interior space of the trailer allows storage room for one standard Autobot car, which can also be shot forward by the launcher.
Hot Rod is featured again in Maximum Dinobots. Returning to Earth to continue his search, Hot Rod arrived at the gates of the Machination's complex, and Scorponok prepared himself to deal with the intruder. Unfortunately, Hot Rod found himself fighting well out of his weight class as he was man handled by Scorponok, who cheerfully bashed his face in, put out one of his optics and snapped his leg. The Headmasters dragged him into Scorponok's control room where, with absolutely no prompting, the big man explained his entire plan for the Dynobots, Skywatch and the Machination. Hot Rod seemed less than impressed with this rather mundane approach, which ticked Scorponok off enough for him to point out that it was obviously just the first stage in his master plan. He was also warned to remain awed or he'd be of no further interest. When the Dynobots and newly arrived Monsterbots seemed to turn Scorponok's plan on its head, Hot Rod burst out laughing, at which point, Scorponok ordered him taken out and shot. In the lift to the surface, Hot Rod suddenly erupted in flames, killing his captors, but draining his power supply. Weakened and with a crippled leg, he collapsed on the floor.
Of particular note to Prime completists is that this otherwise traditional reissue of the Generation One Prime cab has a brand-new head sculpt which is essentially a miniaturisation of the Masterpiece/20th Anniversary Prime's noggin. Not only does this give the "classic" Prime toy a more show-accurate head, it's also the first iteration of this familiar mould in which the head is actually poseable. Being one of the better-articulated early Generation One toys, Prime can finally look in any direction he can aim.
The figure seems to have some transformation scheme & design related problems in it: The front truck cab's upper two pieces are supposed to be pushed to the front in robot mode, but the piece keeps collapsing back due to looseness when the figure is standing straight (Though pressing the two halves together firmly tends to reduce this issue for a while), while the tab underneath the truck grill does not connect well with the bottom port. Additionally, his 5mm compatible hands have a slight problem with wielding weapons with short 5mm posts.
The TakaraTomy release of Optimus Prime has considerable differences from the Hasbro release. His blue and red plastics are darker and metallic, his translucent blue plastic is darker, and a few of his paint operations have been omitted and replaced with customer-applied foil stickers, such as his shins, feet, headlamps, and insignias. His legs, outer forearms and truck mode "sleeper cabin" side panels have been retooled to include 5mm post-holes as part of the line-wide "Arms Micron" gimmick. As such, he does not come with the Hasbro version's weapons, but instead an Arms Micron partner named O.P. who transforms into a weapon resembling Optimus's in-show blaster cannon. This version of the mold was also used to make Prime Nemesis Prime.
With the data from the piece price evaluations I was able to also evaluate the average size of LEGO sets each year. As you can see on the chart below, the average size of sets released each year stayed somewhat constant from 1980-1990 until around 2000 which set sizes started to increase. The average set size seems to have peaked in 2008 (which saw the release of the Taj Mahal), but since then it hasn’t fallen to its pre-2000 levels. It seems to have found a new normal around 300 pieces.
The second known version  ditched the triplechanging gimmick on the cab and simplified things a good bit. This Powermaster Prime has several distinct characteristics only seen in the second design, such as the wider "block head" and two faux smokestacks on top of either shoulder as opposed to one. Also, in a rather odd twist, this design features a black head and fists for both super and regular modes rather than the traditional blue. It also had yellow eyes in either mode a la the original Optimus Prime.
However, the situation was still so desperate that Optimus not only decided to recruit human allies The battle is far from over!, but aggressively tried to recruit and deputise human children, including giving them the power to co-ordinate Autobot teams in battles. He wouldn't even make a final move on the Decepticons until he had enough child soldiers on his side. Earthlings: THE S.T.A.R.S. need your help now! Have the Decepticons defeated us once and for all? In at least one case, this likely led to the death of a small boy at Decepticon hands. Can one boy, alone, hold back the evil Decepticons?
Tomica Optimus Prime is a die-cast non-transforming toy of his truck mode from Prime. It was sold as part of the "Dream Tomica Series", a subline featuring exclusively fictional vehicles. Like all Tomica toys & all Generation 2 GoBots and Spychangers, Optimus Prime features smooth-rolling axle/wheel construction that lets the toys be quickly zipped along smooth surfaces. However, they do not convert into robot mode.
Apart from this, Optimus Prime is also the weakest link of the gestalt combination, due to a number of design failures attributed to his torso mode. The square holes-and-tabs used to secure the arms together when in torso mode are too weak to remain locked in place (though a very small amount of copies can secure the arm well), and are prone to falling out of position should an attached arm be moved. The torso mode's skirt plate is also attached to the stomach rather than the pelvis, rendering the waist swivel nearly worthless due to the skirt obstructing articulation.
In "Decepticon Air", Optimus receives a secret distress call from the Elite Guard ship that is carrying Decepticon prisoners. During the flight, the ship enters an electrical storm, which revives an inactive Swindle and he frees other prisoners to take over the ship. Transwarping to the ship via Swindle's personal transport field, Optimus joins forces with the Elite Guard, rounding up most of the Decepticons in the end.
General Optimus Prime later attended a meeting of the Convoy held by Starscream. There, he assured the others present that he had been mistaken about the rumored Megatron's identity. Starscream was convinced, but the rest of the Convoy were savvy to the truth. The other Optimuses supported General Optimus Prime's decision, stating that if C-81 had earned the General's trust, that was good enough for the rest of them. Optimus was later seen hanging out with Spy-Eye on his off-time. Cybertron's Most Wanted
This mold was redecoed in 2000 as Car Robots Black Convoy, and slightly retooled as his US incarnation "Scourge". After Scourge, the next use of this mold was planned to be Toxitron, which ended up being canceled. The slightly retooled version of this mold was released in 2006 in Japan as reissue Battle Convoy, which was the name of this toy during the Japanese Generation 2. The reissue used the Robots in Disguise modified tooling, with a slightly modified deco using silver vacuum-metalized plastic on his chest and trailer sides along with additional paint applications and G2 symbols. The mold was also redecoed to create a new Generation 2 version of Ultra Magnus as an E-Hobby exclusive (unusual in that the character was killed in the course of Japan's Generation One fiction).
For reasons unknown, his ion blaster was sculpted with a large, rectangular handle, requiring accommodating fists. In order to make use of the other weapons in the line (like his own rocket launcher and the solitarium weapons), he comes with an extra pair of replacement fists with smaller, circular peg-holes. This replacement-fist method is also used to plug in his clear-plastic energy axe.
Part of the fourth wave of Prime: Beast Hunters Cyberverse Commander Class toys, Beast Blade Optimus Prime is a jungle-themed green and blue redeco of his Series 3 Cyberverse Commander Class toy, coming with a new Battlewing Shield accessory in addition to retaining both the Thunder Lance and Star Saber. His shield can open up to form wings, and can be pegged onto the ridge on top of the vehicle's cage compartment, or mount onto the screw-hole on his, er, robot butt.
Reissued in 2003 as part of Takara's Transformers Collection line of reissues. This version (#13 in the Collection series) was retooled from the 2000/2002 Rodimus Major tooling in order to make the fists and engine block hole wide enough to equip Firebolt. In addition, the original 2 guns had their posts modified so that a Targetmaster Hot Rod could still use them, if the owner chose to.
"Hero Mashers" Optimus Prime, Bumblebee and Grimlock took on Megatron in the middle of a busy city. Optimus came to Bumblebee's help while riding atop of Grimlock, swapping heads with his mount to bite Megatron's arm off, getting a hold of the Decepticon's jetpack at the same time. He attached both pieces to himself, and flew around for a bit before returning to the battle. He thoroughly scrambled his pieces with those of his teammates, then took down Megatron with his "dino-fist." Afterwards, the Autobots returned to their normal configurations (though it took them more than one try to do so!) Hero Mashers commercial
Released as part of the first wave of the Energon Igniters Nitro Series, this Optimus Prime is a new Voyager-sized mold that converts from a robot based on his Age of Extinction body into a truck in 11 steps, and he features 5mm-compatible hands & articulation on his head, arms, and only his upper legs. He also features built-in Ion Cannons in this lower leg panels, activated in vehicle mode. He also comes with his own energon core, which is a different mold from his Power Plus toy.
When Jazz brought Steve Guymo to the Autobot base, Optimus and the other Autobots realized that the Decepticons were behind the abduction of humans from airports across the nation. They were able to find the captive humans, whom the Decepticons were intending to ransom to the US government, and free them before engaging Starscream and his squad in battle. With the Decepticons defeated, the Autobots returned to base where Optimus thanked Steve for his help. Sun Raid (Listen 'n Play)
Towering at only barely over two inches, this was actually not just the smallest movie-verse Optimus but even the smallest transformable figure of Optimus Prime for a while - ironically enough, being even slightly tinier than the Smallest Transforming Transformers Optimus Prime - that is, until he was later "out-tinied" by two other cute super deformed versions.
As had first been done in the Armada line, Takara elected to supplement their release of the Super class Optimus Prime figure with a new-mold Deluxe class toy. Coming without trailer, Prime Force or electronics, this Prime discarded the larger toy's ability to form Super Mode in favor of being able to Powerlinx with the other compatible toys of the Energon line, forming either a torso or a pair of legs that the other Autobots could connect to. Like the Deluxe Armada Prime, this one too was on the small side for its size class, but just as that figure could, this small Prime can still tow the Super class figure's trailer.
This Optimus Prime is a new Voyager-sized Triple Changer mold, which transforms from robot to tanker truck to plane and back. His robot mode is heavily based on Generation 2 Laser Optimus Prime, whilst the deco appears to draw from Star Convoy. His Titan Master partner Diac transforms into his head (but any Titan Master figure is compatible). Like all Titans Return Voyager class figures, he has built in mechanisms to "bulk up" his noggin. In his case these are spring-loaded pylons. His robot mode also features fake truck windows.
The Autobots continued to guard humanity in secret for many years, until one day in the 21st century when Ratchet was captured by a human group known as Skylogic Systems. Upon investigating the organization, Optimus Prime and Bumblebee came into contact with the Lone Gunmen, three humans who were also on Skylogic's tail for their role in creating a dangerous virus. Learning from them that Ratchet's DNA was part of the concoction, the Autobots joined forces with the humans and helped track down David Simmons, the man responsible for releasing the virus. One interrogation later and they had the address to the Skylogic base, though Prime's size prevented him from easily infiltrating the building, so he left the rescue mission up to Bumblebee and the Gunmen. Once Ratchet was saved, the Autobots parted company with their new human friends in an attempt to lure away any Skylogic pursuers. The X-Files: Conspiracy: The Transformers
He is designed with a removable head, biceps, arms, and legs, all of which use the same clip-peg/hole joint. This means his pieces can be swapped around in any order, as well as swapped with any other Hero Mashers figure... which includes figures from Marvel Comics, Star Wars, and Jurassic World, meaning you can make some pretty freaky combinations.
The character Optimus Prime appears in the live action films Transformers, Transformers: Revenge of the Fallen, and Transformers: Dark of the Moon as the leader of the Autobots and one of the main protagonists of the three films. In these movies, Optimus Prime is able to transform into a conventional Peterbilt 379 cab, rather than the cab over design of his original Generation 1 body. In Transformers: Dark of the Moon, he regains his first generation trailer. Also straying from the G1 design, Prime's vehicle mode is now decorated with red flames painted onto a blue body à la Rodimus Prime, his Generation 1 successor. The reason for the change was due to Director Michael Bay's decree that mass displacement does not occur when they transform, requiring Optimus's vehicle form to have more mass to achieve the desired size in his robot form.
The problem there is that Star Wars took over the Space theme and Harry Potter took over the Castle theme. Just keeping up with the kids- sign of the times. What’s a castle lover to do? Compare 6075 (Castle) with (7094 Kings Castle Siege) and 4757 (Hogwarts) and they all have their own fantastic attributes. Sell the Harry minifigs and buy some crownies- problem solved.
The first Transformers toys were created from two different transforming robot toylines from Takara, the Car-Robots and Micro Change, from the Diaclone and Microman series, respectively. Hasbro acquired the rights to sell them in the United States but, instead of selling them under their original names, they were rebranded as "The Transformers". The first two years consisted primarily of reusing the Car-Robots/Micro Change molds. The earliest toys had some parts made of die-cast metal, which were eventually phased out.
Walmart have uploaded a very nice commercial via their YouTube Channel that we are sure will please your optics. What is it about? This video features several famous and iconic cars like KITT from “Knight Rider”, Ecto-1 from “Ghostbusters”, Lightning McQueen from “Cars”, the Mystery Machine from “Scooby Doo” and even Fred Flintstone’s footmobile. As some of you should expect, our small yellow hero is present here in his Bumblebee Movie VW Beetle design, and with an impressive entrance emulating Ironhide’s jump from the 2007 live action movie.
Optimus Prime was one of only two Armada-theme figures in the otherwise Generation 1-centric Q-Robo Collection line of super deformed PVC figurines, the other being Armada Megatron. Like all the figures in the series, Prime featured articulation in the neck and shoulders, and was also available in a translucent colored plastic: as an Autobot, Optimus came in translucent red, but was also uniquely available in a golden metallic "pewter" variant as the wave's solitary rare chase figure. All Q-Robo figures were sold in sets of two, one full-color figure and one translucent one, blindpacked in a plastic capsule.
The TakaraTomy "Autobot Alliance" release of this toy has some significant differences, including casting the red plastic in a darker shade, making his shin and wheel joints grey rather than Hasbro's bronze, painting the Matrix of Leadership silver, and swapping out the dual energon swords for battle hooks, similar to 2010's Leader class Optimus Prime. However, due to the Japanese release retaining the Hasbro packaging, the box still advertises the dual energon swords rather than the hooks. He retains the masked face used for the Hasbro release.
If there was one thing the toy planes of yonder were lacking, it was controllability. Guaranteed crash landings and the subsequent walks of shame to go pick up the pieces started to wear a little thin. The advent of radio-control provided an answer for that. But for model builders Aviation Design, that was child's play. Hense, the birth of the FALCON 7X business jet.
Eject lamented that all the great and famous Cybertronians, including Optimus Prime, were long gone by the time Cybertron was controlled by the Builder Assembly. Broken Windshields The Maximal Overshoot experienced a series of visions from Cybertron's past after discovering the Oracle, including Optimus Prime launching the Ark during the Great War. Cultural Appropriation
Generation 1 Optimus Prime has appeared in numerous video games since the introduction of the Transformers series. He makes a cameo in the 1999 Beast Wars Transmetals video game for Nintendo 64, where he is killed by Megatron at the end of the campaign, showing what would have happened in the Beast Wars series with a Predacon victory. Prime is also one of the playable characters in the 2003 Japan-only Transformers game for the PlayStation 2 and the 2010 Transformers: War for Cybertron. Optimus Prime is also playable in the Hasbro Net Jet Transformers fighting game Transformers Battle Universe. Three versions of Optimus Prime are playable characters, including the first generation incarnation, his incarnations from the 2007 live-action film, and the incarnation from Transformers Animated. In this game, Optimus Primal is also a playable character. He is a regular character in the Nintendo GameCube and PlayStation 2 2003 fighting game DreamMix TV World Fighters. He appeared as a boss in a simple Flash-based video game on the Hasbro web site.
Rodimus also appeared in the Dreamwave Energon Comic. In this continuity Rodimus's history in unclear, but he seems to be a veteran Autobot assigned to Earth. He acts as a mentor to many of the less experienced Autobots: for example he was the first to congratulate Ironhide when he overcame his fears to defeat Tidal Wave. He was one of the defenders of Toronto alongside Hot Shot, Red Alert, Hoist, Beachcomber and Thrust, battling against Divebomb and a swarm of Terrorcon clones before receiving help from a very unlikely source - Megatron, resurrected in a new body by Optimus Prime. The subsequent counterattack routed the Terrorcons.
In the United Kingdom, this Optimus Prime was released as an Argos exclusive along with several other sets branded as part of the Reveal the Shield subline imprint. His United States release was initially claimed to be exclusive to Target by online retailers from Asia, but even though the other Reveal the Shield products eventually became available at Target, Voyager Class Optimus Prime was released as a Toys"R"Us exclusive in the United States instead, complete with a "Toys"R"Us exclusive" sticker. Also, both his United States and Asian releases lack the "Reveal the Shield" logo the United Kingdom release has (but still feature the "Reveal hidden images" call-out).
Optimus Prime is armed with two large rifles formed out of a combination of both smokestacks and fuel tanks. These rifles peg into lower arms with grips for his open hands. The under-slung fuel tanks can fire spring-loaded projectiles. In vehicle mode, both smokestack rifles can be deployed as twin cannons, and this mechanism can also be used to store the rifles and deploy them as shoulder guns in robot mode.
Like the original figure, Powermaster Prime is composed of two major components: his truck cab, which transforms into Prime himself, and his trailer, which is essentially a heavily-armed version of the original. The trailer has a fold-down ramp to allow the storage of a smaller Transformer, or perhaps spare accessories. The trailer transforms into a battle station armed with two long black rifles and two grey double-barreled cannons (featuring seating for Powermaster engine figures), all of which Optimus Prime can also wield in his fists.