In The Transformers: Devastation, Hot Rod is repaired and reformatted into a Dodge Viper. Dealer tried to convince him to pull some strings to get him to Earth, but Hot Rod and Wheeljack had the more important task of rescuing Ironhide. They ran into a bit of trouble with the Machination's Headmasters. They managed to escape temporarily, but were found and Wheeljack was incapacitated. Hot Rod easily held his own with the Headmasters, and noted that for some reason they had lost their "edge". He received a little help from Hardhead, who was mainly there to take Hot Rod and the others back to the Ark-32 for evacuation to Garrus-9. Hot Rod refused to go, wanting to see the Headmaster mystery through to the end. Hardhead reluctantly let him go.
Transformers GT "GT-R Prime" is a heavy retool of Alternity Convoy, transforming into a 1:32 replica of the Motul Autech GT-R race car used by the Nismo team in the Super GT racing championship series. He retains the flip-out blasters of the Alternity toy and can also wield his new Impact Wrench Gun accessory (also called the "Optimus Rifle" on the Transformers GT website), a weapon based on the impact wrenches used in car repairs. Like all GT toys, Prime also comes with a GT Sister, poseable human figures themed after race queens, his partner being a lady named Misaki.
Transformers Siege Greenlight will be released sooner than later, especially compared to exclusives from previous years. We have our first preorder up on Amazon.ca revealing two important points: who the exclusive retailer is and what the price point will be. Now we know that it will be an Amazon exclusive. While we only know for sure that this will be the case in Canada, it stands to reason that it will be an Amazon exclusive elsewhere to, which is great news since those are always the - Read More

The toy's primary gimmick is its auto-transforming trailer, which assumes one of three configurations when triggered by an infra-red signal transmitted from the cab robot. Transforming the cab into robot mode will cause the trailer to automatically flip open into a battle station for Mini-Cons, which Prime can stand in the centre of. The base features a central tower with a pop-out artillery emplacement and a mount for Prime's large cannon; a rotating missile-firing turret; two Mini-Con storage bays, one of which featured a manually-activated tab to launch Mini-Cons out; and two live Mini-Con hardpoints, one of which pops up a non-firing turret, the other activating a laser noise.
Our Deal of the Day features hand-picked daily deals with low prices on top electronic products, video games, tools, items for your kitchen and home, sporting goods, computer software, and more. Every day you will see our Lightning Deals displaying limited-time deals at great prices; make sure you buy quickly because these deals will go away fast. Our other Savings and Sales include hundreds of items throughout Amazon to pique your interest for savings on HDTVs; movies or TV shows; fashion items like clothing, jewelry, and watches; toys; and magazines. Come back often as our deals update daily.
Available exclusively from Japanese clothing company A Bathing Ape in 2017, MP Convoy Reissue BAPE Ver. is a trailer-less redeco of the MP-10 mold sporting a unique black color scheme matching the Convoy Reissue BAPE Ver. BLACK of the original G1 toy, with "BAPE's famous camouflage pattern" and an ape head print on the shoulder replacing the usual faction symbol.
The First Edition Voyagers were never released in the US, forcing buyers to import him from Canada or Japan... at first. ToysЯUs later picked up this toy, along with most of the "First Edition" line, as part of a huge block of US market exclusives for holiday season 2012. This second run introduced a deco variant, in which the red paint on, beside, and below the truck side windows is omitted, revealing the patch of brown plastic underneath. As he is packaged in robot mode, with his front wheels and shoulders covering said patch, the only way to identify which version is which while in the box is by looking at the hinge joints beside his two painted torso lights, with the center portions of the hinges being unpainted brown on the variant. All releases of this mold also have a minor issue with the truck mode windvane/robot mode heels refusing to connect solidly to the truck cab in vehicle mode, leaving a visible gap above Prime's windshield.
This Optimus Prime is a non-transforming truck that is loaded with a number of gimmicks: Pressing the back button activates his Weaponizer-sque (or Stealth Force-sque) battle mode on his truck form, with the lights being emitted in the same time. He features both spring-loaded (truck front) and pressure-firing (both sides of the launcher) discs, with a flat character art of Slipstream & Sawback being sculpted on it. Optimus Also comes with additional Slipstream and Sawback figurines, which they can be (uselessly) attached on Optimus Prime's truck top & both sides of the launchers.
A second die-cast vehicle representing Prime was also part of the Mini Car Collection, this one a red redeco of Majorette toy #291, a Chevrolet K-10 pick-up. To distinguish it from the other Optimus vehicle, this one is randomly allocated the "Super Mode" label, and features an image of the leader in his powered-up form on is hood in addition to the Autobot symbol and series logo.

Available in the Timelines "Generation 2" 2-pack alongside Sgt. Hound at BotCon 2015, General Optimus Prime is a redeco of Generations Voyager Class Roadbuster based on the cancelled Generation 2 General Optimus Prime toy. He transforms into an off-road vehicle and comes with numerous weapons, all of which peg via 5mm post onto his vehicle rear/legs, shoulders, upper & lower arms, and hands: a spring-loaded, missile-firing launcher, a pistol, a rifle, and two small cannons that respectively form the scope and stock of the rifle. All of his weapons can combine to form an unwieldy superweapon. It was unknown if this figure has the loose ratcheted shoulder joints from the Legends release of the mold.
Compared to the Combiner Wars release of the mold, Convoy features additional paint operations on the thighs, truck bumpers, the details on the inner legs, the gestalt chest halves (which are now painted over due to being molded in grey plastic), and the gestalt torso's lower section. The stomach's deco is also minimized, and the silver paint operations on the lower legs are now replaced with gunmetal while the mute metallic blue is now shiny metallic. When it comes to unpaintable plastic; his leg joints and feet are now blue, while the gestalt skirt flap is now the same grey as the arms. In addition, his flip-up gestalt leg panels and thighs are now molded in black, with the latter being painted in silver with some yellow details.

Punch reported back to Optimus on what he had learned about the Decepticons as Counterpunch. Mainly, that they were planning on attending BotCon 2010. Optimus then turned to Teletraan I for more information about BotCon. Upon learning that special honors would be held for him at the convention, Optimus led his troops to BotCon once more. BotCon 2010 Promo
In robot mode, Voyager class Optimus Prime is proportionally more accurate to his CGI design than the leader class toy and has a more accurate headsculpt. However, due to the aforementioned lessened complexity, significant sacrifices had to be made, such as "cheats" to the transformation sequence to achieve this. He is thus less accurate overall than he initially appears. In addition to previously mentioned changes, he carries much of the truck's front hood, grill and fenders on his back like a backpack. Nevertheless, he maintains a superb level of articulation and posability.
Many of the small features and electronics of the original Masterpiece mold are left out. Instead, this Convoy features better overall cartoon accuracy (chest interior, head, etc.), an extensive red paint job that covers much of his red plastic, corrected robot mode proportions, improved articulation, and its gun can now collapse and store inside a compartment on its back in either mode. In addition to Convoy's trailer, which can transform into Combat Deck, it also comes with Roller, a small Spike Witwicky figurine, a die-cast metal Matrix of Leadership (with a clear blue plastic center), and an energy axe that slips over Convoy's right hand. Spike can fit inside the cab in vehicle mode, ride in Roller's seat, or fit into any of the seating compartments inside Convoy's trailer. Roller has options to plug in Convoy's gun or pull Convoy's trailer, and the trailer itself can store Convoy's weapons in any mode. Although not easily breakable, care must be taken for posing the index fingers; extending the finger even far would cause it to pop off.

Created with the specific purpose of producing an Optimus Prime as accurate to the original animated series as possible, the toy is exceptionally poseable, partially constructed from die-cast metal, features rubber tires and vacuum-metalized plastic and is heavily detailed, with sliding pistons in its joints and working spring-loaded suspension in vehicle mode. The figure also contains multiple non-intrusive gimmicks, such as a moving mouthplate to emulate Prime's traditional method of speech, flip-up communications panels on the forearms depicting images of Bumblebee and Starscream, and an opening, light-up Matrix chamber in the chest, which contains a removable vacuum-metalized Matrix of Leadership that can also be pulled open.
Part of the first wave of Prime: Robots in Disguise Weaponizer Class toys, Optimus Prime is a large toy, similar in size to Leader Class figures from previous Transformers toylines. He features a simpler transformation and design compared to previous Leader-sized figures, with him having fake chest windows (again) and a simplified, hollow truck rear where his feet, arms, and fake chest windows are plainly visible. He comes with a blaster which can mount onto his hands, shoulder-pads, and the sides of his legs/truck rear.
While the Transformers animated series came to an end in America in 1987 after The Rebirth, production was continued in Japan with three new, exclusive animated series spin-offs to continue the story. The first of these series, Transformers: The Headmasters, supplanted the events of The Rebirth. With the Decepticons defeated, the Autobots entered into an even closer relationship with Earth. The Autobots also began the colonization of other worlds, the first of which was the planet Athenia, where Optimus Prime was stationed. It soon became apparent, however, that the consequences of releasing the energy of the Matrix to cure the Hate Plague were more far-reaching than Optimus had anticipated. Without the energy of the Matrix to act as a balancing factor, Vector Sigma had become destabilized. The Decepticons suddenly returned to exploit this, assaulting Cybertron in order to seize control of the mega-computer. Prime took a squad of troops to aid in the battle on the planet. When the arrival of the Autobot Headmasters tipped the battle in their favor, Prime broke off from the main attack and headed down into the depths of the planet, planning on stabilizing Vector Sigma at any cost.
Many who received their first LEGO set in the early 1990’s are now adults looking forward to buying a LEGO set for their first child or for themselves. When we are younger, we do not fully understand how money works. We do not realize that a large LEGO set can require hours of work to earn. We only know what we want. I would wager that it isn’t until our first jobs that we can fully appreciate the value of money. We all wanted the large sets as kids and we didn’t realize how hard our parents had to work for them.
Prime was brought back to the Autobot base for treatment, but the Decepticons exploited the Autobots' lack of manpower and struck again before Prime recovered. With his men taking a pummeling, the unconscious Prime had a vision of Akira, who spurred him on to awaken and rejoin the battle. With another power boost from Wataru, Prime unleashed a super-charged shot from his ion blaster that took down the fleeing Decepticons. Time of Resurrection
Unfortunately for both Takara and Hasbro, the Generation Two series of Transformers sold poorly, and Hasbro abandoned it after two years. There were toys planned that never saw release. Most of these were G1 combiner team recolors or recolors of recent figures. Four unreleased molds were released in the Machine Wars line, and four more resurfaced in the Robots In Disguise series.

In "Prime Target", Lord Cholmondeley, a big game hunter, set his sights on the ultimate trophy, the head of Optimus Prime. In order to lure Optimus in, Cholmondeley captured Tracks, Bumblebee, Jazz, Beachcomber, Grapple, Blaster and Inferno. Windcharger and Huffer were able to avoid being trapped. When Cosmos learned where Cholmondeley was keeping the captured Transformers, Optimus Prime accepted Cholmondeley's challenge to meet him alone. Although interrupted by Astrotrain and Blitzwing's attempt to ally the Decepticons with Cholmondeley, Optimus defeated the big game hunter and freed the Autobots. Cholmondeley and the stolen jet were handed over to the Soviets by the Autobots as punishment for his actions.

This Optimus Prime is an extensive screen-accurate redeco of the Dark of the Moon Supreme Class/Leader Class Striker retool, using the Ion Blaster accessory from the Buster Optimus Prime and the Toys R Us Japan-exclusive battle blade accessories. He also comes with the Knuckle piece and the Battle Hooks and uses the 2-2-1 articulated fingers featured from the second Asia Premium Series release. He also features a Japanese language sound box for his voice gimmick, replacing Peter Cullen's "I am Optimus Prime" voice line.


GT-R Prime was racing against GT-R Saber and GT-R Maximus when they were rudely interrupted by GT-R Megatron, a ruthless racer out to prove his worth by defeating all others. A fight broke out, but Prime interrupted it and convinced Megatron that they all shared the same need for speed, persuading him to settle things with a race instead. Transformers GT: Mission GT-R
Released to commemorate the 10th anniversary of Revenge of the Fallen, this Studio Series Optimus Prime is a retool of the figure above, featuring many new parts, namely a new backpack, chest piece, and a pair of non-transforming fenders/legs, to better resemble his appearance in the first two movies. These new parts allow him to combine with Studio Series Jetfire to form "Jetwing Optimus Prime." His color scheme features a much higher contrast than the previous release. Instead of Energon Swords, he now comes with an ion blaster like that used in the battle of Mission City. He also comes with a cardboard backdrop display depicting the highway fight with Bonecrusher from the first Transformers film.
Tim Bailey, Sara Blackburn, Stephen Clark, Jeffrey Cohen, Adam Dimuzio, Mathias DeRider, Tom Fassbender, Luke Forney, Logan Giannini, Travis Hanson, Sean Hallenbeck, Michael Harrison, Kim Haynes, Whit Honea, Greg Howley, Michael J., Angela Leach, Michael LeSauvage, Jim MacQuarrie, Eric Parrish, Michael Pistiolas, Ricardo Rebelo, Drew Rich, Mitchell Roush, Mariana Ruiz, Tony Sims, Randy Slavey, Erik Stanfill, Andrew Terranova, Gerry Tolbert, Mark Vorenkamp, Chris Wickersham
Like some other Legends/Legion Class toys, several of the loose units were dumped in some Hobby Shop dealers in Asia, although this one is very likely to be an identical knockoff of the toy. While the paint applications are pretty much identical to the real deal, the pegs on the legs/trunk front can be a little too tight when attached. in some worst cases; it can break off if attempted to pull off by force.
Hasbro has had a bit of a strange relationship with Bumblebee. In the early days (we’re talking mid-’80s) he was hugely popular, both on the TV show and as a toy, and Hasbro was sure to capitalize on that. As a result, there were more different Bumblebee toys during that time and into the early ‘90s than for any other Transformer. Of course, the alternate Goldbug version helped boost the number of toys they could make.
Menasor cut off Prime's escape and handed him the Reflector trio, who confronted Prime with a hologram of Serpent O.R. The new Decepticon leader carried Megatron's memories and information downloaded from Soundwave, from which he learned of the Matrix of Leadership. Serpent O.R. offered Optimus a trade: hostages and peace if he handed over the Matrix. Optimus agreed.
In robot mode, like Combat Hero Prime, the bottom of the truck became his familiar windowed chest based upon the original Optimus Prime toy. His main gimmick was light up LED headlights, and a lightpipe in the bottom of his right fist, illuminated by an LED in his right forearm, that would illuminate his clear sword or his double-barreled rifle if they were used in that hand. All three LEDs were activated simultaneously by pressing the sunroof-like depression on the roof of the truck.
×