Hot Rod is often portrayed as energetic, yet brash and headstrong, with an overwhelming self-confidence that borders on arrogance.[1] As Rodimus Prime, leader of the Autobots, he is significantly more mature, physically powerful and instilled with the wisdom of the previous holders of the Matrix of Leadership. In a reversal of his behavior as Hot Rod, Rodimus is plagued by lack of confidence in his role as Autobot commander and often doubts his own decisions, feeling both inferior to and in some ways living in the shadow of the previous leader of the Autobots, Optimus Prime.

Featuring a complex transformation, the front and back ends of the truck essentially fold and converge to become Optimus Prime's legs, as much of the truck rear is connected to the robot thighs via a series of folding panels. The rear wheel cowlings feature a hinge joint in the middle of them so they do not impede his knee articulation. The halves of the rear cabin of the cab, directly connected to the smokestacks, rotate and connect to his torso and unfold into his arms. As with most mainline Movie toys, Optimus Prime features Automorph gimmicks, and due to his price point, he has three of them. Firstly, during initial transformation, rotating his front fenders to become his heels flips the top parts of the grill to become his toes. Secondly, sliding out the double-barrel cannon in his right forearm flips out his spring-loaded Ion Blaster, which lands into place for his right hand. (The Ion Blaster can actually be popped off his forearm fairly easily, as it is held in place by a simple clip.) Optimus's final Automorph, located in his torso, is activated by flipping the silver lever on his stomach, activating a series of spring-loaded actions where the truck windows are pushed apart and the lever between them is raised, enabling the head to spring up from the chest cavity. At this point, yellow LEDs light up the chest windows and Optimus Prime's eyes, accompanied by a "powering up" sound effect.
In another possible sequence of events, the trio returned to Autobot headquarters to relate their findings to Optimus Prime. The Decepticons planned to use a Destruction Beam to create a fault line near Center City, which would in turn be exploited by Rumble’s earthquake-inducing abilities to destroy the entire area. The Autobots then decided to split up in two groups, one to attack the Decepticons’ fortress, the other to stop Rumble in Center City. Optimus headed the lead team.
This mold was redecoed into Universe Optimus Primal and Beast Wars Telemocha Series DX Convoy, and retooled into Beast Wars Reborn/Beast Wars Tenth Anniversary versus pack Optimus Primal. Takara also created multiple special variants, including all-gold (from Tele-V Magazine, only ten awarded), red and gray (Tele-V again, but only one awarded), and blue-fur (a Comics Bom Bom design-contest prize, only five awarded).
There is also the release of Optimus Prime as a deluxe sized brown gorilla which is a repaint of the Beast Wars 10th anniversary Optimus Primal toy most likely trying to tie Optimus Prime in some way to the jungle planet Animatros in the Cybertron series. According to his bio, Optimus Prime was temporarily mutated into this form by the Animatros Cyber Planet Key. The colors of this toy are a homage to Transformers: Universe Optimus Primal.
When Starscream attacked a power plant with the aid of his brainwashed ally, Skyfire, Prime carried Grimlock to the scene of the battle on the back of his truck mode. The Enemy from the Arctic During the conflict that followed, Prime's suspicions about Wataru were confirmed when the boy manifested a barrier to protect himself and Bumblebee and to help Skyfire overcome the influence of Starscream's mind-controlling helmet. Wataru was a Booster as well! Wataru's Power His past experiences naturally made Prime hesitant to put Wataru's power to use, but Osamu Kihara made the point that Wataru's power was invaluable for hunting down shards of the Energon Cube. Prime and Wataru headed out to investigate a local relic that Kihara suspected was a cube shard, and Wataru's powers soon confirmed the doctor's findings. Just as Prime was about to report back to Kihara, however, Megatron struck, demanding that Prime hand over both the shard and Wataru. Prime attempted to feign ignorance of Wataru's powers, but Megatron ignored his bluff and encouraged him to hand the boy over, lest he cost another Booster their life. Driven into a rage by the stinging barb, Prime violently attacked Megatron with his energon-axe, but as the duel raged, Megatron continued to question Prime's beliefs and his attitude. Unable to deny Megatron's accusation that he had hoped to use Wataru's power to defeat him, Prime lost his concentration and was taken down by the Decepticon leader. Despite what he had learned about a previous Booster dying, Wataru stayed true to Optimus and activated his powers, healing the Autobot's wounds and powering up his energon-axe into a huge sword. Summoning all his energy, Prime took down Megatron with one almighty slash, then collapsed into stasis lock. Optimus Prime's Secret
When the Decepticons tried to take control of a solar energy station, Prime sent Roller in to investigate. Megatron's Fight for Power Later, Prime sent Bumblebee to spy on the Decepticons' latest misdeeds, and the Autobots discovered that they were having trouble with the ion drive of their starship. Prime led the Autobots in an attack on the mine the Decepticons were using to test their propulsion system and routed Megatron's force. Autobots Fight Back
A slight redeco of Takara's Deluxe-size Optimus Prime was released as part of a special set commemorating both the 20th anniversary of Transformers and the 30th anniversary of its progenitor, Microman. Coming with an exclusive metallic redeco of Takara's Kicker, which was based on the Microman body, this Prime featured a chromed grill where the original had painted plastic, and supposedly slightly shinier plastics. Very slightly.

Optimus was able to rally Autobot factions from across Cybertron to the cause and launch an all-out attack on Shockwave's fortress. He headed the assault himself, but broke rank when he saw the image of Shockwave blasting Ultra Magnus upon one of the many monitor screens planted around the Decepticon's headquarters. Optimus charged in to confront Shockwave, beating down all opposition along the way. Coming upon Shockwave's throne room, Prime was greeted by Ultra Magnus, who pointed him towards a secret passage through which Shockwave had absconded. Leaving his wounded brother to rest, Optimus barged into Shockwave's secret chambers, only to be overpowered and have the Matrix ripped from his chest. With it, Shockwave was finally able to activate Vector Sigma. Countdown to Extinction Stalling, Prime listened as Shockwave recounted the history of Cybertron, and eventually Ultra Magnus arrived, having recovered, to attack and defeat Shockwave. Prime and Grimlock helped him escape from the fortress as it crumbled to the ground. With Shockwave's defeat, the Autobots would now be able to start rebuilding Cybertron towards true peace... but Optimus remained troubled by Shockwave's motives; he recognized that Shockwave would not be urged to action by mere fancy. Optimus pondered what greater threat awaited Cybertron for Shockwave to so thoroughly plan for its arrival. Revelation The injuries Prime took in this conflict necessitated a prolonged restoration period in stasis. Both he and Ultra Magnus were tended to by Perceptor and Hoist as they recuperated. Generation 1 #0 Though Magnus recovered in due course, Optimus's systems had received a more severe shock due to the Matrix being forcefully removed from his frame. Thus, he needed additional time spent in recovery before he could reboot. Black Sunshine

Optimus Prime is primarily voiced by Peter Cullen in most of his incarnations, who voiced him in the original series. Following the production of the 2007 film, Cullen reprised his role for the sequels and supporting media and would even voice Optimus in later series such as Transformers: Prime. Optimus has been voiced by a number of other voice actors in other series such as Neil Kaplan, Garry Chalk, and David Kaye in the series Transformers: Robots in Disguise, Unicron Trilogy, and Transformers Animated, respectively.
Through the years, there have been many action figures made in the likeness of the original incarnation of Optimus Prime, some of which have been featured in fiction, others of which have not. Additionally, some toy makers have made unlicensed toys in his image or accessories for the existing toys. The original 1984 Optimus Prime toy was part of Takara's 1983 Diaclone toy line named "Battle Convoy". It was designed by the creative design team of Hiroyuki Obara, Shoji Kawamori, famous for his work in Macross, and Kohjin Ohno.[23] The toy's characteristics, such as the head design and the use of the cab front as the upper torso, have become design elements in nearly every incarnation and variant of Optimus Prime. This particular toy has been reissued multiple times, mostly to commemorate the anniversary of the Transformers franchise. Optimus Prime was also released as an Action Master and Powermaster toy in the original Transformers toy line.
After step 5, the instructions did not mention that you should fold back the shoulder panels to form the sleeper part until the 11th step. Care must be taken while transforming the legs: the small peg located on the lower leg can be snapped off due to the peg being slightly thick to accommodate with the hole. Also, take note that Optimus Prime cannot wield 5mm weapons with longer posts, as the way that his pinky finger is molded prevents the post from pegging down through his hands. Also, take note that the legs' sculpted small rectangle peg (the one that locks the robot mode legs in place) is prone to warping if care is not taken during transformation.
This redeco of Leader-class Optimus Prime replaced most of the plastics in the cab robot with colored translucent equivalents, with chromed silver wrist-pipes, a golden chrome Matrix, and red chrome window frames. His trailer remained opaque, but was cast in much deeper red plastic, with a more metallic silver used for his cannons. He was available only in a Toys"R"Us Japanese exclusive giftset released in October 2005, with a redeco of Wing Saber, and the Coby Sen'yō Rumble.

Available exclusively at Toys "R" Us, Rodimus transforms into a futuristic car that is a homage to the vehicle mode of Generation 1 Hot Rod. A panel on the car's hood, which is also the figure's chest, can be flipped to either show an engine block or the figure's Autobot insignia. The figure comes with an Energy Bow, capable of firing two missiles. His bow can also be tabbed to the roof of his car mode or snapped on his hand. The tabs that secure his bow in vehicle mode are 5mm wide, making it usable by other figures as well. His legs are normally bent for the underside of his car mode but can be locked straight during transformation.


Part of the first wave of Prime: First Edition Voyager-Class toys, Optimus Prime transforms into a truck, with a similar (but more complex) transformation to his previous Deluxe-Class toy, and features a faux-kibble window-chest panel as well as a detailed truck cab interior. He comes with a "Cybertronian battle sword" and a "plasma cannon", either of which can peg into his hands. The cannon also features a 5mm peg-hole on the underside of its barrel, allowing the sword (or any other compatible accessory) to mount there as a bayonet. They are stored in vehicle mode by pegging them onto either the 5mm-compatible trailer hitch, or onto each peg-hole beside it, although the instructions tell you to peg the sword facing forwards onto the hitch, with the cannon mounting backwards onto one of the side pegs. His trailer hitch ends up on his right robot leg, and he has a fake, sculpted, equally-usable trailer hitch on his left leg. He features a cardboard stand as with all "First Edition" toys, but the weak adhesive used for its flaps mean it often has trouble supporting the weight of a Voyager class figure for an extended amount of time, the top caving in as the glue gives way.
The DOTM packaging release of this 2-pack features an altered paint application on Optimus Prime's ion blaster/barrage cannon. On the original ROTF packaging release, the slide-out barrel on Prime's blaster is painted silver with a black paint spray app to simulate usage of the weapon, and the exposed inside wall of the gas tank at the top of the blaster is left as unpainted grey plastic (exactly like the blaster on the original single-boxed ROTF Buster Optimus Prime). After receiving numerous reports from customers that the silver paint on the slide-out barrel was easily scraped off by merely transforming it from gas tank to blaster, Takara-Tomy briefly stated in an interview that they had addressed the issue for the Dark of the Moon packaged version by swapping the placement of the silver paint application. Thus, the Dark of the Moon packaged version now features the slide-out barrel on Prime's blaster as unpainted grey plastic with an unchanged black paint spray app to simulate usage of the weapon, and the exposed inside wall of the gas tank at the top of the blaster is now painted silver.
Optimus and Bumblebee snuck into the Decepticons' base, and found their enemies upgrading themselves with Autobot parts. The pair took offense to this, and Bumblebee set about sabotaging the process. Megatron wound up tripping on some gumballs thanks to the Autobot's mucking about, and Optimus congratulated his fellow Autobot on a prank well done! Intro!
Pressing the button on his robot mode chest activates the red lights (well, because the blue ones are expensive for the price point) on his chest, and the sounds and voice phrases (provided by Taitem Kusunoki) were played along with the light-up gimmick. Pressing the button for a few seconds will activate his long voice line with transformation sounds.

Although the character was redesigned to some extent, like the other characters in the film, many classic design elements remain in his robot mode including a predominantly red torso, primarily blue legs, the presence of windows in his chest, smoke stacks on his shoulders, and a head design influenced by the original, featuring the iconic faceplate and ear finials. The faceplate is able to retract to reveal a mouth. His weapons include his iconic ion blaster stored in the form of the fuel tanks on his back, and a shell cannon stored on his back, two retractable energon blades that extend from both forearms, which is a homage to Prime's energy axe in the Generation 1 animated series, two retractable energon hooks on both of his forearms, and bladed knuckles. The trailer contains an energy axe, a shield, and flight gear. In the later IDW comics, he displays the ability to produce a holographic driver.
The set also includes a redeco of Generations War for Cybertron Optimus Prime figure, which changes the original figure's dark red plastic to a brighter, more vibrant red, changes the gray plastic to a darker charcoal tone, changes the "windows" from gray to nearly black, and replaces most of the original figure's pink-ish red paint details (which were yellow on the redeco from the "Rage over Cybertron" three-pack) to teal.
A Japanese exclusive, this is a new line of Transformers toys shaped from Disney characters that were first introduced in 2009. Originally revealed in the November 2008 issue of Figure Oh! Magazine in Japan, it was a collaboration project between Takara Tomy and the Walt Disney Company. The first line of the toy series is the Mickey Mouse Transformer which was modeled after Optimus Prime with the same colors as its Transformer counterpart and can transform into a cartoonish trailer truck like the original version. The toy was released on February 26, 2009 following with the Black and White Version a month later on March 26, 2009. A figure of Donald Duck based on both Bumblebee and Herbie the Love Bug, and a second repaint of the Mickey Mouse trailer in Halloween colors, are also planned for release.

With the data from the piece price evaluations I was able to also evaluate the average size of LEGO sets each year. As you can see on the chart below, the average size of sets released each year stayed somewhat constant from 1980-1990 until around 2000 which set sizes started to increase. The average set size seems to have peaked in 2008 (which saw the release of the Taj Mahal), but since then it hasn’t fallen to its pre-2000 levels. It seems to have found a new normal around 300 pieces.


Alternatively, the Autobots could concoct a plan where Optimus would pretend to allow himself to be taken prisoner, per Buddy’s suggestion. The Decepticons, fooled into thinking they’ve won, took Optimus Prime into their base. Having hidden his troops inside his trailer, Optimus and the Autobots then led a surprise attack on their unsuspecting foes.
This TakaraTomy Asian market-exclusive Leader Class two-pack consists of a redecoed Jetfire and a slightly altered Buster Optimus Prime. Buster Optimus Prime is almost identical to the single-pack Japanese release of the toy, but unlike the standalone Buster Prime, has a head with a faceplate, itself containing more paint details than the first release of Revenge of the Fallen Leader-class Optimus Prime. The flames are outlined with light blue instead of white for accuracy to the physical truck prop (though it ends up being inaccurate in robot mode). Jetfire has a subtle, more movie-accurate colour scheme.
Nonetheless, I remain a big fan of Lego and although I think they have somewhat moved away from their roots with the excess of licensed products (and the earlier licensed products were, in my opinion, not very good because they contained too many specialized non-generic pieces that weren’t useful for generic building. But that situation is improved and in particular we have found the Star Wars sets to be of most value for generic building, because they generally have very few really specialized pieces (although to be fair the sets are most useful for building other spaceships, etc).
Prime soon had other things to worry about, as Magnus arrived on Earth with the intention of taking the Matrix, which he believed was rightfully his, at all costs. Prime, who refused to fight back, was seriously injured by Magnus. Magnus tracked Optimus to a desert island, where he pretended to offer him the hand of friendship, only to attempt to absorb the Matrix for himself. During the struggle, the brothers combined into the form of Omega Prime, also known as the God Fire Convoy. Through this link, Magnus was also able to channel the power of the Matrix, which he used to supercharge the Autobot Brothers into newly colored forms. Prime went on to battle the Decepticons on many other occasions. Although Magnus remained a free agent, refusing to take orders from his brother, over time, his animosity dwindled, and he frequently helped the Autobots by combining with Prime to battle the Predacons and Decepticons. During the final battle with Megatron's new form, Galvatron, the two brothers finally reconciled. Together, they faced Galvatron at the Earth's core and defeated him once and for all.
This Classics Optimus Prime is a smaller, Deluxe Class figure with a noticeable physical resemblance to Takara's Robotmasters Prime figure, and a transformation that is about as successful. The figure is armed with a tommy gun-shaped laser rifle that transforms into a turret-like configuration and mounts on the rear of his truck mode, and features a spinning "power punch" action that sees the whole upper half of his torso spin when a button on his back is pressed. Pressing the button "unlocks" the spinning mechanism; pull hard on the button, and you can lock the torso back into place.
The third version [18] would quite possibly have been the most gimmick loaded Transformer in the history of the line, simultaneously being a Powermaster, Headmaster, and Triple Changer. The Headmaster also would have been a Triple Changer, turning into a sort of armored four-wheeled rover (Roller II?) and robot as well as a rather silly looking Optimus Prime head with four vertically aligned wheels jutting off the sides. It seems that when the extra Headmaster gimmick was scrapped, the super mode head remained separate rather than being reintegrated into the trailer hitch such as on the earliest design. Notably, the body of this design is extremely close to the final design.

The toy that would ultimately end up as the original Optimus Prime toy was originally released in August 1983 as No.17 Battle Convoy from Takara's Diaclone Car Robo toyline in Japan. In 1984, Joustra released their own version (still with Diaclone sticker on the trailer) as part of their Diaclone line in Europe, either simply called Truck (according to the pack-in catalog) or Diaclone (in the pack-in comic). It's possible that GiG also released a version called Camion Convoy as part of their Trasformer line in Italy, but to this day no packaged sample has surfaced.


Optimus was able to rally Autobot factions from across Cybertron to the cause and launch an all-out attack on Shockwave's fortress. He headed the assault himself, but broke rank when he saw the image of Shockwave blasting Ultra Magnus upon one of the many monitor screens planted around the Decepticon's headquarters. Optimus charged in to confront Shockwave, beating down all opposition along the way. Coming upon Shockwave's throne room, Prime was greeted by Ultra Magnus, who pointed him towards a secret passage through which Shockwave had absconded. Leaving his wounded brother to rest, Optimus barged into Shockwave's secret chambers, only to be overpowered and have the Matrix ripped from his chest. With it, Shockwave was finally able to activate Vector Sigma. Countdown to Extinction Stalling, Prime listened as Shockwave recounted the history of Cybertron, and eventually Ultra Magnus arrived, having recovered, to attack and defeat Shockwave. Prime and Grimlock helped him escape from the fortress as it crumbled to the ground. With Shockwave's defeat, the Autobots would now be able to start rebuilding Cybertron towards true peace... but Optimus remained troubled by Shockwave's motives; he recognized that Shockwave would not be urged to action by mere fancy. Optimus pondered what greater threat awaited Cybertron for Shockwave to so thoroughly plan for its arrival. Revelation The injuries Prime took in this conflict necessitated a prolonged restoration period in stasis. Both he and Ultra Magnus were tended to by Perceptor and Hoist as they recuperated. Generation 1 #0 Though Magnus recovered in due course, Optimus's systems had received a more severe shock due to the Matrix being forcefully removed from his frame. Thus, he needed additional time spent in recovery before he could reboot. Black Sunshine
IDW's Transformers Collectors Club exclusive comic story, Revelations part 6, is set after the defeat of Galvatron, but before Optimus Prime's mission to start a new Space Bridge project. In this story, the Autobots from the IDW series Robots in Disguise, Optimus Prime, Ultra Magnus, Sentinel Maximus, Downshift, Perceptor, Alpha Trion, Over-Run, Anti-Blaze, Checkpoint, and Scythe, meet the Autobots from the animated series, Cybertron Optimus Prime, Jetfire, Override, Scattorshot, Red Alert, Hot Shot, Lori, Bud, and Coby Hansen, and thank each other and remembering those who were lost in the battles.[40]
This sculpt was redecoed by Takara into a golden Lucky Draw figure and later released in its original coloration with a trailer as a "Perfect Edition" (see below for both), while Hasbro would later redeco it into their Classics-branded "DVD Edition". The mold was also used to make Masterpiece Ultra Magnus and "Convoy Black Version", representing one of many drones built in Prime's image, rather than Prime himself.
This redeco of Henkei Convoy is cast almost entirely in translucent colored plastic. Also known by the nickname "Crystal Convoy" among fans, it was first released as an exclusive for the Japanese convention Tokyo Toy Fair 2008, limited to 1000 pieces at the event, but was later made available through e-HOBBY. It was sold in a monochrome-blue version of Henkei Convoy's regular packaging.
Movie the Best Nemesis Prime is a redeco of the TakaraTomy exclusive Calibur Optimus Prime figure, with darker paint and plastic, and bright, metallic, purple eyes, and the mark of Quintessa on his face. As for the weapons, the Caliber Axe uses translucent purple plastic instead of orange, and there is more silver at the base of the blade. The Overshield has black replacing the original's silver and purple replacing the original's bronze.
In Titan Magazines' UK Transformers magazine, a comic strip on Optimus Prime, written by Simon Furman, would reveal where he was during the events of Movie Prequel #1. As he carries out his fateful plan to send the Allspark into space, the Autobot base is attacked by one of Megatron's drones with specific orders to kill him. As it locates the Allspark, Prime does the only thing he could think of to prevent it from transmitting its location to Megatron. He transforms into protoform mode and physically rams through it. Recovering in time to see the Allspark blast off, Prime is granted a vision of their war on Earth.
If they took the left passageway, the group happened upon Megatron’s lab. Though Megatron attempted to trick Optimus into activating the Fortress’s self-destruct sequence, Optimus was too clever to be duped. After deactivating both the Destruction beam and the Decepticons themselves, the Autobots found Jessie tied up in a cell. The Autobots then celebrated their victory by guzzling a few quarts of fine-grade oil.
Each of his kabuto helmets forms the head for one of the two combined modes. In addition, either of his kabuto helmets can be connected to his robot mode back (allowing his swords to also be stored on his back), and both can be connected to the rear of his train mode simultaneously. In robot mode or combined mode, his kabuto helmets can be held individually as a shield or combined into an even larger shield.
A redeco of the Wing Convoy Super Real Figure, Wing Convoy Original Figure (ウイングコンボイ オリジナルフィギュア) was available at JUSCO department stores starting on July 30th 2004. The figure was available with purchase of a Wing Saber figure, and came in a plastic baggie, rather unattractively scotch-taped inside the toy's packaging. A sticker was placed on Wing Saber's packaging to note the promotion.
The "robot mode" of Optimus Prime is where the pullback motor and working wheels of the toys lie. Optimus is sculpted in blue plastic, pre-posed in an odd crouching pose with zero points of articulation. His right knee is bent back, with his right arm touching his knee, while the left side has the leg forward and the left hand holding onto his butt. The toy is as sparsely painted as the truck, with light blue eyes and chest windows, gray hands and feet among other parts, and red forearms. Two panels on his back have red flame tongues on them.
Optimus Prime has a wide range of articulation for a relatively bulky figure. He has ratcheting joints in his shoulders, elbows, hips and knees, with swivel joints and ball joints supporting them in his biceps, lower knee joints and ankles. Again, unusually for a mainline figure, especially at the Leader pricepoint, his hands have individually articulated fingers and thumbs, but no wrists.
Cosmos warned Optimus about a fuel plant the Decepticons were building, so Optimus took the Dinobots in his trailer and, under the guise of having a delivery for Shockwave, invaded the construction site and defeated the Decepticons. After this victory, Optimus turned his gaze skywards, and thanked Cosmos for his contribution to the Autobot cause. The Autobot Spy in the Sky
This exclusive redeco of Optimus Prime features darker shades of red and blue than his other releases and has extensive paint applications to resemble his on-screen appearances in The Last Knight, particularly his Nemesis Prime alter ego seen in the film. To that end, he features movie-accurate flame patterns, which are larger and more elaborate then the ones on the regular release or the SDCC exclusive, on his vehicle mode exterior and robot pectoral armor. His eyes and sword are also painted metallic purple, but his shield is completely unpainted for some reason.

This Optimus Prime is a new Voyager-sized Triple Changer mold, which transforms from robot to tanker truck to plane and back. His robot mode is heavily based on Generation 2 Laser Optimus Prime, whilst the deco appears to draw from Star Convoy. His Titan Master partner Diac transforms into his head (but any Titan Master figure is compatible). Like all Titans Return Voyager class figures, he has built in mechanisms to "bulk up" his noggin. In his case these are spring-loaded pylons. His robot mode also features fake truck windows.
For all the positive aspects, these changes are not without their drawbacks. The LEGO community has been crying foul over the perceived decline in quality of the bricks5. While nowhere as bad as their competitor, any decline in quality reflects poorly on a company known for quality control. The LEGO group has been expanding its manufacturing base to places outside of Denmark, into Mexico, the Czech Republic, and China (although so far it seems only their “signature brand” non-set items are made in China). LEGO claims that this has not changed their dedication to the quality of standards by which they abide. However, it seems that the molds have changed to reduce plastic6.  Whether or not this affects the durability of the bricks is yet to be seen.
Optimus Prime started life as Optronix (Orion to his friends), Hardwired a data archivist at the Vaults. After taking note of a battle in which the Autobot leader Sentinel Prime had been defeated by Megatron, he was summoned to the Council of Ancients and informed that the Matrix had chosen him to be the next leader of the Autobots. He received the Matrix of Leadership shortly thereafter, gaining a powerful new body in the process. After dispatching a Decepticon assassination squad sent to, well, assassinate him, he ordered the Autobots to prepare to evacuate Cybertron, intending to leave the Decepticons to their own devices. The War Within #1
The seldom seen 5th season re-airing of the show featured the G1 episodes retold by a stop-motion Powermaster Optimus Prime to the live-action youngster Tommy Kennedy. Although no back story was ever provided for how Prime became a Powermaster, the new sequences are said to take place after the four previous seasons. This indicates that Prime became a Powermaster in the original Sunbow continuity.
"Garbage Truck" is a redeco of the same Optimus Prime toy in blue and white, a common coloration for Japanese garbage trucks that bears ends up bearing a coincidental resemblance to the Bot Shots Polar Assault Team Optimus. His stickers now picture his truck mode being loaded with garbage, his truck mode driving around, and the word "cleaning" in both English and Japanese.

During the Cybertronian Civil War, Sentinel Prime was killed. Prior to his destruction, he bestowed the Matrix of Leadership to Optimus Prime, who became the new leader of the Autobots. Despite being one of the youngest Cybertronian leaders, Optimus demonstrated extraordinary courage and wisdom in the war against the Decepticons. He: treated all lives with benevolence, fought for freedom and peace, and continues to fight to protect the weak and maintain their beliefs.
The Japanese version of the toy, named "Optimus Prime Revenge Edition", was exclusively available at Tokyo Toy Show 2009, and later also from e-HOBBY. Despite being sold in Hasbro packaging like the mass retail Revenge toys in Japan (plus the addition of Japanese stickers marking it as a Japanese market release and containing Japanese safety warnings and manufacturer information), it slightly differed from the Hasbro version insofar as it lacked the tampographed kanji lettering.

The third United Optimus Prime toy is a redeco and slight retool of the Deluxe Class figure from Hasbro's 2010 Transformers toyline, itself an homage to Prime's Generation 2 "Laser" form. The toy features translucent blue plastic as opposed to Hasbro's orange, red paint is used on the biceps instead of blue paint, extra red paint applications on the knees like the original's sticker detail, and more broken-up red apps on the shoulders. Silver detailing was added to the cab mode on the grill, the bumper, and near the doors. The blue plastic in cab mode is now black plastic to make the figure more accurate to the Generation 2 original. The gray plastic is changed from the Hasbro version to more closely match the 2006 reissue of Laser Optimus Prime. Black paint was applied to the cab mode to mimic the fade from red to black on the original Laser Optimus, but still includes a flame deco like the Hasbro version, only in a different design. It lacks the roof-mounted rubsign of the Hasbro version, instead including Autobot insignias on the cab doors. (Disappointingly, they are Generation 1 insignias, rather than Generation 2 ones!) Additionally, a retool was made to the peg on the inside of his right shoulder, to make it shorter and wider than the Hasbro version, allowing it to move freely without hitting the torso, unlike the Hasbro release.
Although no scannable badge is located at his robot mode, the badge was located at his combined mode's left shoulder. The badge was impossible to be scanned while in-package due to the obstruction of the spring-loaded combiner chest kibble. Speaking of impossible, the badges on the re-releases of the toy can't be scanned by the game. The instruction sheet amusingly replaces Optimus's last picture in the transformation process with Sideswipe.
This deluxe-size, highly-poseable version of Armada Optimus Prime is an entirely new mold, retaining the ability to tow Super Base Prime's trailer, though he cannot combine with it. He comes with the Mini-Con Over-Run, who can transform into a gun for him, or can peg onto the Powerlinx plug on Optimus's back to activate a double-fisted "punching" action (that looks more like hyperactive shrugging). Like the Super Base figure, Prime has a flip down chestplate, but lacks a molded-in Matrix, and his smokestacks can be removed (and in many cases will simply fall off), but cannot peg together as a gun. Shipping in a great many waves throughout most of the later run of the line, Super-Con Optimus became a notorious pegwarmer.
The 5-inch Power series is a little more complex (4-9 steps) and a little more spoilery, because it’s the first hint we’ve gotten that Megatron might be a part of the Transformers: Bumblebee movie. Sporting a similar form to previous versions, his alt mode is a 4-track Cybertronian tank (with the usual very conspicuous face…funny how a lazy toy design decision from the first movie has now become cannon). The Power series also has the only Dropkick Energon Igniters toy. You can use the cores sold with the Power Plus and Nitro toys to unlock special features. Camaro ‘Bee and Hot Rod round out this series.
Upon witnessing the incredible power of a lightning storm for the first time, Optimus Prime had Sparkplug Witwicky explain the phenomenon to him. Intrigued by the potential of lightning, Prime put Huffer and Gears to work finding a way to harness its energy, so they could use it to aid in the rebuilding of their spaceship. Huffer constructed a giant lightning rod, and Optimus Prime and the Autobots gathered to watch its first test. They were shocked, however, when a fleet of battered, damaged Decepticons flew out of the mountain housing the antenna and off into the night. The evil robots had attempted to discover the device's secrets and been seriously electrocuted! Once the lightning rod had been checked, Prime vowed to make the lightning-harnessing technology the Autobots' gift to Earth once they had left the planet. Autobots' Lightning Strike

A mode for Arms Master Optimus designed for underwater combat, "Aqua Screw Mode" was shown in Cybertron Satellite segment of "Explosive Sword Transformation! Wheeljack and Dreadwing". C.L. and Balo are combined into a propeller engine and attached to his right foot, their GR and G redecoes do the same for the left, and B.H. B is attached to his right shoulder to act as a radar system. He wears Arc S's blade on his right arm and wields the Giga Tornado Cannon Combo Weapon.
Part of the first wave of Beast Hunters Series 3 Voyager Class toys, Optimus Prime is functionally an upsized copy of his Beast Hunters Series 3 Cyberverse toy, though with certain sculpted details based on his larger toys, the replacement of his ball joints with more robust ratchet joints, the addition of thigh swivels, and various deco differences. As a result, his complexity is lower than in his previous Voyager Class toys, but he ends up being much, much more massive.
On another beautiful day, Optimus sat under a tree with Bumblebee and Hound, discussing the Decepticons. A while later, Beachcomber reported that Grapple had shot at him. Optimus smelled a Decepticon plot and led an assault on their headquarters, only to find that Grapple had been injected with a cerebro-shell, placing him in Decepticon control. Battle commenced, during which Grapple was freed and helped them defeat the Decepticon. Afterward Optimus said it all had been worth it to get Grapple back. Insecticon Attack!
Legion Class Optimus Prime is a redeco/retool of the first Revenge of the Fallen Legends Class figure, with the deco resembling the paint job from Optimus Prime's Western Star "5700 OP" concept truck. While the main body is identical to the figure, the arms and legs are newly tooled, with simple assemblies for the wheels. The retooled legs now features a more solid stopping point, which prevents the center front grill/legs to swing back further. It should be noted that his flame decals are painted over the side windows.
Optimus Prime was subject to several molding and color variations in his early days. The earliest release of the figure featured larger fists, a gun with a thick, round barrel, a slightly-differently shaped gas pump, grey rockets, a grey Roller, a grey launcher in his Combat Deck, and metal plates in the floor of the Combat Deck (a holdover from the Diaclone version of the toy, to which the magnetic feet of the pilots could cling). In short order, his fists were slimmed down, the gun's barrel was pared down to a more slender form, the gas pump's shape was altered, the rockets and launcher were recast in black plastic, the metal plates were removed from the Combat Deck, and Roller's color was changed to a light blue. Along with Roller's color change, however, the Combat Deck's drone pod also became light blue, and a third running change soon followed that saw it restored to its original darker blue, and Roller changed along with it. These modified components would become the default accessories used by subsequent reissues of the Prime toy would take, though Roller stills fluctuates back and forth between grey and dark blue, depending on how show-accurate each reissue wants to be.
×