The largest Movie Optimus Prime toy (until Revenge of the Fallen, that is), Leader Class Optimus Prime features the most accurate representation yet of the CGI designs' complex transformation sequence, the only difference being the arms which are placed behind the cab while they constitute the hood in the CGI model. He transforms into a heavily-customized Peterbilt 379 conventional extended-hood, and unusually for a mainline figure, he has rubber tires on all his wheels. His Ion Blaster weapon is stored in the rear of the truck's bunk, exposed like an engine block. Though Optimus has no trailer, he has a hole where the fifth wheel (known among fans as a 'hitch') is sculpted in the rear of the truck, should owners find a suitable trailer to use. Due to safety reasons, the tips of his long smokestacks are made of rubber. A switch on top of the cab roof activates horn sounds and window lights.
He includes the Sword of Judgment and Sentinel Shield accessories, which he can respectively wield and mount on his left forearm, all via 6mm post. In truck mode, the sword is stored underneath, while the shield mounts onto the trailer hitch. The sword also features a 5mm post on its hilt. Interestingly, the truck mode is able to pull G1 Optimus Prime's trailer.
An all-new Leader class figure of Optimus Prime, featuring a robot design and transformation that is closer to its film counterpart than the 2007 toy version. Features retractable blades on both forearms. New "MechAlive" feature consists of visible moving gears in the chest behind the cab windows. At the push of a button on the back of the cab, the truck mode emits an engine idling sound. The transformation sound is played when the upper torso and lower torso are connected. A recording of Peter Cullen saying, "I am Optimus Prime!" is played when his chest is pushed upward via a lever on his waist.[97]
Based on the Classics toy line, the Timelines 2007 story is set 15 years after the end of the Marvel Comics story (ignoring all events of the Marvel UK and Generation 2 comics). According to exclusive bio information in the Transformers Collectors' Club magazine #15, Hot Rod followed Optimus Prime back to Cybertron from the Planet Klo. Once back, Hot Rod took up racing, but after a while found it pointless. Optimus Prime assigned to help organize the millions of Cybertronian refugees who returned to their home world. Hot Rod chaired the Cybertron Grand Challenge race, a race which featyred combined Autobot/Decepticon teams. With his maturing Hot Rod changed his name to Rodimus and was chosen to return with Optimus Prime to Earth to stop Megatron. Optimus Prime returned to Earth commanding Bumblebee, Cliffjumper, Grimlock, Jetfire, Mirage and Rodimus. When the Cybertronians Skyfall and Landquake arrive on Earth unexpectedly, Megatron attempts to destroy them, but Optimus Prime and his Autobots are able to drive Megatron away. Rodimus is wounded on a mission with Optimus Prime, before being brought back to the Autobot base.
This redeco of Leader-class Optimus Prime replaced most of the plastics in the cab robot with colored translucent equivalents, with chromed silver wrist-pipes, a golden chrome Matrix, and red chrome window frames. His trailer remained opaque, but was cast in much deeper red plastic, with a more metallic silver used for his cannons. He was available only in a Toys"R"Us Japanese exclusive giftset released in October 2005, with a redeco of Wing Saber, and the Coby Sen'yō Rumble.
Multiple reports suggest that the toy suffers from a design flaw, inferior plastic quality, or both: Due to his hands having peg-holes that are a bit too small to accommodate 5mm posts, they have a tendency to show stress marks on the inside after pegging his sword handle (or most other pegs) inside. Stress marks also tend to appear near his tiny hinged wrists. Fortunately, there have been no reports of the hands actually breaking on either location thus far.
A second die-cast vehicle representing Prime was also part of the Mini Car Collection, this one a red redeco of Majorette toy #291, a Chevrolet K-10 pick-up. To distinguish it from the other Optimus vehicle, this one is randomly allocated the "Super Mode" label, and features an image of the leader in his powered-up form on is hood in addition to the Autobot symbol and series logo.
Generations Selects Ricochet and Red Swoop - Following our last news post regarding this new "Generations Selects" toyline (previously called "Select Series"), we finally have new images of the first two releases, Deluxe Class Red Swoop and Ricochet! These two figures are redecos of Power of the Primes Swoop and Jazz respectively. Red Swoop is based of the original G1 toy's colors (which can be found on the stock renders for the Power of the Primes toy), while Ricochet is meant to evoke the Headmasters character Stepper.
The second known version [17] ditched the triplechanging gimmick on the cab and simplified things a good bit. This Powermaster Prime has several distinct characteristics only seen in the second design, such as the wider "block head" and two faux smokestacks on top of either shoulder as opposed to one. Also, in a rather odd twist, this design features a black head and fists for both super and regular modes rather than the traditional blue. It also had yellow eyes in either mode a la the original Optimus Prime.
ROBOTKINGDOM.COM Newsletter #1462 Hi, Here is a quick update from www.robotkingdom.com.  #1 Hot Items! Flame Toys : Transformers Star Saber. Preorder. Available in May 2019. US359.90 http://www.robotkingdom.com/ftstarsaber.html Flame Toys [Furai Model] - Bumble Bee. Preorder. Available in May 2019. US44.90 http://www.robotkingdom.com/4897054512308.html Takara Transformers Masterpiece MP-34 Masterpiece - Read More
For its release in Korea, Hasbro Asia provided a collector coin featuring truck-mode Optimus Prime on one side and "MP-01L" on the other. The coin came mounted on a card featuring lineart of the Autobot leader's head, the stark black design of which could be mistaken for promoting the earlier "Sleep Mode" release. The limited release (and general lack of enthusiasm for the collector coins in Korea) makes this one of the more difficult Masterpiece coins to find.
There is another factor that comes with the sticker shock. As I showed before, LEGO has had $100+ sets for a while. However, only recently have they produced sets even more pricy than that. When we were kids, the $100 set was the pinnacle of LEGO. It was the set we all aspired to own. It was the set we all went straight to at the store. Of course we rarely ended up with that set, but that was our dream.
Like the original figure, Powermaster Prime is composed of two major components: his truck cab, which transforms into Prime himself, and his trailer, which is essentially a heavily-armed version of the original. The trailer has a fold-down ramp to allow the storage of a smaller Transformer, or perhaps spare accessories. The trailer transforms into a battle station armed with two long black rifles and two grey double-barreled cannons (featuring seating for Powermaster engine figures), all of which Optimus Prime can also wield in his fists.

The Animated Tech Spec written by Derrick J. Wyatt in Hasbro Transformers Collectors' Club #24 states that Rodimus as having the rank of Prime and clearly being the leader of a team like Optimus and Sentinel. His toy is listed as "Rodimus Minor" which Hasbro explained at San Diego Comic-Con 2009, was because "there were already too many Primes in the toy line". Within the series, he is only ever called or credited as "Rodimus".
The figure would have come in a monochrome version of the standard Henkei! Henkei! Convoy's packaging, still named "Convoy" but now labeled as part of the Gentei! Gentei range of exclusives.[8] Reportedly, this figure was intended as a Wonderfest exclusive, but was canceled because, according too TakaraTomy designer Shogo Hasui, it was too similar to Universe Nemesis Prime. Knockoffs were later made available, so buyers beware!
Normally Big Lots is a good place to look for older toys and potato chips from brands you've never heard of, but look at this, something new! Thanks to a sighting by our very own xRotorstormx of the Twincast Podcast crew we have news of the BotBots 5-packs showing up at Big Lots. Priced at $10 and appearing before most major retailers the 5-packs feature four visible figures and one secret figure under the red bubble, similar to the single figures that started showing up during the - Read More
Although MechTech Optimus Prime's deco is similar to the first Deluxe Class figure, some of his parts (robot shoulder flaps, chest piece/truck front) were recast in blue plastic (with the chest being painted red), and his paint applications on the pelvis, headlights & thighs are omitted. His front truck hood/backpack's deco is altered: the truck steps and the fenders were painted blue, and the gold sprays on the flame tampographs are removed, while he features additional flame tampos on both sides of his front hood, and an Autobot Insignia on his left robot shoulder. He still retains the light-piping gimmick, but cast in clear plastic, with the eyeballs being (halfheartedly) painted with clear blue. His MechTech weapon is cast in transparent orange plastic, with the exception of the scope/lever and the gun barrel, which remained opaque silver plastic due to being cast with unpaintable plastic. He also features Cyberglyphics on the left side of his vehicle mode front hood.

The brand was yet to get its biggest revitalization, though. In 2007, Paramount Pictures released a high-budget live-action movie. Though many long-time fans resented the changes in style and story that the movie brought forth, it performed incredibly well at the box office and launched the brand into the public eye all over the world. Now, everyone recognized the concept of alien robots disguised as cars, and everyone associated the concept with the name: Transformers.

Smallest Transforming Transformers Convoy is the smallest fully transforming Optimus Prime toy yet. He features an accurate transformation sequence based on the original full-sized toy, but understandably has no detachable hands, and has little articulation. His sculpt is based upon his cartoon appearances. He comes with a tiny version of his laser rifle.

A mode for Arms Master Optimus designed for underwater combat, "Aqua Screw Mode" was shown in Cybertron Satellite segment of "Explosive Sword Transformation! Wheeljack and Dreadwing". C.L. and Balo are combined into a propeller engine and attached to his right foot, their GR and G redecoes do the same for the left, and B.H. B is attached to his right shoulder to act as a radar system. He wears Arc S's blade on his right arm and wields the Giga Tornado Cannon Combo Weapon.


This small version of Energon Optimus Prime was released by Kabaya as part of their DX Transformers line of candy toys. Prime transforms in the same manner as the larger Energon figures do, though his arms have to be removed at the shoulder and reinserted into his back to form truck mode. The Prime Force were sold in a separate set in the DX Transformers series, and can combine with Prime to form his Super Mode. Optimus came with a stick of gum.
But it is scary to think that there is a strong possibility they will look at redoing almost every Masterpiece now if this is a success. The MP+ releases have me feeling tired. I don’t have to get them but I have a completionist mentality. But a redo... I’m almost ready to check out of MP completely. I waited so long to get six seekers done pretty well to me. Now there’s a chance they will redo them. And soundwave. I sure hope I’m just being a worry wart.

It was expected that the release of a new movie would involve the production and release of associated toys from Takara and Hasbro. Images surfaced, on-line, of some toy prototypes, notably Starscream and a new Decepticon who was to be named Blackout, along with packaged samples of movie preview "Protoform" Optimus Prime and Starscream toys. Similarly, fans found preliminary artwork of multiple characters, although it was not known at the time how close these were to the final designs. The designs were significantly different from those of the Generation 1 characters with the same names. Reactions varied widely: some fans objected strongly to the designs, occasionally going so far as to threaten a boycott if the designs were not changed to be more traditional, while others liked them. The issue became a divisive one, as detractors accused supporters of lacking respect for the franchise's history, while supporters accused detractors of being "stuck in the past", and not accepting change.
This Cybertron spin pop consists of a generic handle with an Optimus Prime sticker, topped with a figurine of Prime through which the included lollipop slots. When the handle is squeezed, a manual gear mechanism spins both the figure and lollipop—no batteries necessary! The handle was also redecoed in orange for a Megatron spin pop, with a figure of the Decepticon leader on top.
Part of the first wave of the "Mini-Con Weaponizers" subline imprint, this One-Step Changer figure of Optimus Prime is a new sculpt. In the Robots in Disguise mobile game, it was identified alternatively as an "Advanced One-Step" or "Evolved One-Step" figure depending on the user's region, but on the toy's packaging, no such modifiers are featured, and it is available as part of the regular One-Step Changer assortment. This figure shares most of its engineering with One-Step Fracture.
The live-action Transformers movie was slated to premiere in the U.S. on July 3, 2007, and was a joint collaboration among DreamWorks SKG, Paramount Pictures and Hasbro, Inc. Paramount Pictures was slated to release the film in the United States, as it had by now made DreamWorks Pictures one of its wholly owned subsidiaries, and was also to be responsible for the international release of the film through United International Pictures, its joint venture with Universal Studios. The feature was directed by Michael Bay from a screenplay written by Alex Kurtzman and Roberto Orci. It was a new story, set apart from the previous incarnations of the cartoon(s) and comic(s). A new origin and characters were introduced. Steven Spielberg, who with Jeffrey Katzenberg and David Geffen had established DreamWorks SKG, was the main executive producer of the film, with Lorenzo di Bonaventura, Tom DeSanto and Don Murphy serving as co-executive producers. In practice, this meant that they were the primary financial sponsors of the film.
This new roughly 11-inch leader-sized mold of Optimus Prime transforms from a robot to trailer/truck combination and back, with the transformation taking cues from both the Reveal the Shield Legends Class and the Robots in Disguise Legion Class toys. Surprisingly, he does have a reasonable amount of articulation, including a balljointed head and hinged joints for his arms, shoulders and legs, plus lateral hinges for his feet. His head includes light-piping and, unlike other Cyber Series toys, his truck windows have actual transparent plastic rather than just being merely painted.
In Transformers vs. G.I. Joe comics, Bumblebee is offed as well. His ship is damaged during a space chase with Starscream, so he lands on Earth where G.I. Joe and Cobra are going at each other (as per usual). But his fatal mistake was helping G.I. Joe favorite Snake Eyes, who was trying to take on Starscream. In the process, Bumblebee got in the Joe-Cobra crossfire and was ripped apart by missiles. This wasn’t a true death, however. First, Starscream took Bee’s head to Megatron, who wore it on a necklace (yes, really), but eventually the head got back to the Autobots, who planted it back on his repaired body and he came back to life.
Power Surge Optimus Prime is a new mold, in the size of a Leader Class figure, which transforms in 7 steps. It comes with the Mini-Con Aerobolt, who transforms from a bird to his chestplate. This triggers electronic lights and sounds, as well as deploying a mask, two shoulder cannons, and a pair of large wings for the larger robot. His front truck kibble can be removed, but you can transform him into vehicle mode with the kibble on.

On the battlefield, there are few who rival Optimus Prime's prowess. He is easily the strongest of any Autobot his size, and his ion blaster and energon-axe are deadly weapons. He would sacrifice his life to protect his fellow Autobots or those under their care and does so on a regular basis. His compassion for other sentient beings is his only real weakness, and one the Decepticons have taken advantage of time and again... though it's also the source of his strength!
The figure was released in Japan along with Legends Megatron and Starscream, under the "EZ Collection" banner, in the same packaging as the Hasbro release but with a small card insert featuring the Japanese logo and nomenclature, similar to a USA Edition. As with all the EZ Collection figures, this release features a substantially greater number of paint operations that increase Optimus's resemblance to his larger figure.
This redeco of the Ginrai tooling of the Powermaster Optimus Prime figure (released concurrently with the 2001 reissue of the Ginrai figure) was a Toys R Us Japan exclusive black repaint, made to represent the original Optimus Prime equipped for a special mission. All of his red and blue plastics were changed to black, his clear blue windows were now tinted red, making his overall colour scheme very reminiscent of the now-familiar 'Black Convoy' color schemes.

His main gimmick, however, is his quintet of "Firebreath Cyclocannons"—spring-loaded dragon-headed missile launchers mounted on an ornate, rotating circular contraption attached to his back/roof. Turning the handle on top makes the backpack rotate and cycle through each cannon, and pressing the handle's button will trigger and fire whatever cannon is at the top/front. When the cannons are cycled through in robot mode, his eyes and windshield-chest light up, and one can alternatively rotate (but not fire) the cannons and activate his light-up features by pushing down on the fake spiky fenders on his stomach. Out of the package, the handle itself comes detached to allow the rest of the toy to fit.
By the ‘90s, the genre had begun to fade, and boys' minds turned to more high-impact action, often centered around mutants, monsters, and karate. Hasbro saw potential in the embers of the Transformers brand, and turned it over to newly-acquired subsidiary Kenner for a jump-start. Kenner threw out all the old rules, and invented a line of Transformers that were more poseable, more feature-packed, and more exciting. Backed by a high-tech CGI cartoon, Beast Wars turned the brand around, making Transformers a bestseller again.
If the Autobots went along with Prowl’s strategy, the resulting heat from the explosion caused the Autobots’ circuits to overheat, rendering them unconscious. Upon reawakening, the Autobots found themselves captives of Megatron, who informed them that their fellow Autobots would soon perish, and that the humans would be conquered by the Decepticons shortly after.

Optimus Prime is the fictional protagonist of the Transformers: Robots in Disguise (Fire Convoy in the original Japanese version) branch of the Transformers universe.[38] Based on the character of the same name, Prime once again leads the Autobots against the Decepticons. His voice actor, Neil Kaplan, does his voice in a style reminiscent of that of Peter Cullen, the voice of the original Optimus Prime. Wired Magazine nominated Fire Convoy as one 12 most ridiculous Transformers ideas of all time.[39]
×